Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 May 2007 11:46:48 +0500 (AMST)
From:      Hrant Dadivanyan <ran@styx.aic.net>
To:        Hajimu UMEMOTO <ume@freebsd.org>
Cc:        Cezary Morga <czarek@therek.net>, freebsd-mobile@freebsd.org
Subject:   Re: Reading SD/MMC cards on Asus A6000 series laptop
Message-ID:  <E1HqkcS-0000op-Dx@styx.aic.net>
In-Reply-To: <ygeps4s5x47.wl%ume@mahoroba.org>

next in thread | previous in thread | raw e-mail | index | archive | help
> Hi,
> 
> >>>>> On Tue, 22 May 2007 23:14:17 +0200
> >>>>> Cezary Morga <czarek@therek.net> said:
> 
> czarek> I'm wondering have you managed to get SD/MMC Ricoh card reader up and 
> czarek> running on a Asus A6M laptop? Somehow I cannot find any info on that 
> czarek> with google and list archives.
> 
> You may want to try
> 
> http://www.agt.ne.jp/~a-gota/programs/driver/FBSD6.2R/memcard/sdmmc-20070422a.tar.gz
> 

I can confirm that it's fine on the first run on Inspiron 6400.
Write speed was about 5MB/s on Kingston mini SD. Thanks for excellent work!
Hrant

dmesg:
sdshc0: <Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter> mem 0xef9fd400-0xef9fd4ff irq 18 at device 1.1 on pci3
sdshcbus0: <SD Standard Host Controller slot bus> on sdshc0
sdshcbus0: capability: 3.3V Suspend/Resume DMA High-Speed
sdshcbus0: card inserted in slot #0
sd0: <Unknown 42 SD2GB rev 1.0> on sdshcbus0
sd0: Ver 2.00 Standard Capacity SD memory card
sd0: 1909MB (3910656 x 512-byte blocks)
sd0: access time: read 20.0ms, write 2560.0ms
sd0: speed class 0
sd0: max clock 25MHz, drive at 16.500MHz
sd0: 8.250MB/s transfers with 4-bit bus width

pciconf -lv:
sdshc0@pci3:1:1:        class=0x080501 card=0x01bd1028 chip=0x08221180 rev=0x19 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'SD Bus Host Adapter'
    class      = base peripheral
none1@pci3:1:2: class=0x088000 card=0x01bd1028 chip=0x08431180 rev=0x01 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    class      = base peripheral
none2@pci3:1:3: class=0x088000 card=0x01bd1028 chip=0x05921180 rev=0x0a hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'Memory Stick Bus Host Adapter'
    class      = base peripheral
none3@pci3:1:4: class=0x088000 card=0x01bd1028 chip=0x08521180 rev=0x05 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    class      = base peripheral

> Sincerely,
> 
> --
> Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan
> ume@mahoroba.org  ume@{,jp.}FreeBSD.org
> http://www.imasy.org/~ume/
> _______________________________________________
> freebsd-mobile@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org"
> 

-- 
Hrant Dadivanyan (aka Ran d'Adi)			ran(at)psg.com
/* "Feci quod potui, faciant meliora potentes." */	ran(at)styx.aic.net



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1HqkcS-0000op-Dx>