Date: Tue, 21 Jan 2003 08:55:44 -0600 From: "Thomas T. Veldhouse" <veldy@veldy.net> To: "Nate Lawson" <nate@root.org>, <freebsd-current@freebsd.org> Subject: Re: Error Mounting /dev/acd0 on /dist: during sysinstall of 5.0-RELEASE Message-ID: <002801c2c15d$2d334810$0605010a@VELDYT> References: <Pine.BSF.4.21.0301202200530.64259-100000@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I am trying to install from the CD-ROM, so I don't really have the option
unless I do it from the boot loader. I can say that it is not set for the
installed system (which I installed via FTP) and yet, I can mount a CD just
fine. It is just a problem from within sysinstall. Below are the results
of dmesg on my system after I installed from an FTP server.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003
root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0673000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06730a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 600024637 Hz
CPU: AMD-K7(tm) Processor (600.02-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x612 Stepping = 2
Features=0x81f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,MMX>
AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!>
real memory = 402571264 (383 MB)
avail memory = 384110592 (366 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS K7V > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 8 entries at 0xc00f15e0
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe4000000-0xe7ffffff
at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device 4.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uscanner0: Visioneer Visioneer 6100 USB Scanner, rev 1.00/0.00, addr 2
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 5 at device 4.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 11.0 (no driver attached)
pci0: <input device> at device 11.1 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x8800-0x883f mem
0xd6000000-0xd60fffff,0xd6800000-0xd6800fff irq 5 at device 13.0 on pci0
fxp0: Ethernet address 00:03:47:97:f6:b8
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad0: 38166MB <WDC WD400BB-32AUA1> [77545/16/63] at ata0-master UDMA66
ad1: 19574MB <WDC WD205BA> [39770/16/63] at ata0-slave UDMA66
acd0: DVD-ROM <IDE DVD-ROM 16X> at ata1-master PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9100> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s2a
Tom Veldhouse
----- Original Message -----
From: "Nate Lawson" <nate@root.org>
To: "Thomas T. Veldhouse" <veldy@veldy.net>
Cc: "FreeBSD-Current" <freebsd-current@freebsd.org>
Sent: Tuesday, January 21, 2003 12:01 AM
Subject: Re: Error Mounting /dev/acd0 on /dist: during sysinstall of
5.0-RELEASE
> On Mon, 20 Jan 2003, Thomas T. Veldhouse wrote:
> > I get an error when trying to install FreeBSD 5.0 RELEASE.
> >
> > "Error Mounting /dev/acd0 on dist: Operation not supported by device
(19)"
> >
> > This occurs after the filesystems have been created and it is about to
mount
> > the CD to finish the installation. I am able to install via FTP without
> > trouble. And I can mount a CD using the installed system.
> >
> > I have a ASUS K7V motherboard (VIA Apollo 133 Chipset). I have had this
> > problem all the DP and RC recent releases.
>
> Does setting hw.ata.atapi_dma=1 help?
>
> -Nate
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002801c2c15d$2d334810$0605010a>