Date: Tue, 20 Feb 1996 00:19:15 -0700 From: Yogen_Appalraju@mindlink.bc.ca To: questions@freebsd.org Message-ID: <m0tonGD-000CNOC@rsoft.rsoft.bc.ca>
next in thread | raw e-mail | index | archive | help
I have installed FreeBSD 2.1 on a Pentuim notebook Twinhead Slimnote-890 TX with a US Robotics Courier 28.8 PC Card. I have carefully followed the user ppp configuration in the FAQ but can not get it to work. When at the "ppp ON hostname>" prompt, and type "dial provider" I get "dial failed". I tried testing my modem connection using tip but did not get much further. When I type tip cuaa1, I get the response "connected" but at this point I don't know what to type? Do I need any special drivers for my PC Card? Do I have to do something special in my /etc/modems file? Do I need to change my dial script from the one given in the FAQ i.e. special script for the US Robotics PC Card? My /etc/ppp/ppp.conf has the following login script "TIMEOUT 10 gin: username word: password ENTER: 3" for the following login sequence Login--Login: username Password: password ENTER: 3 (for ppp) when i do dmesg, I finds sio0 and sio1 properly configured on start up i.e., irq 4 & irq 3 tun0: flags=8051<UP,POINTOPOINT,RUNNING> mtu 1500 inet 10.0.0.1 ---> 199.60.101.254 netmask 0xffffff00 Please assist or refer to any additional documentation. Thanks in advance. Yogen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0tonGD-000CNOC>