Date: Thu, 14 Aug 2008 17:04:49 +0200 From: "Carole Macheret" <Carole.Macheret@ch.meggitt.com> To: <freebsd-scsi@freebsd.org> Cc: Roland Rothen <Roland.Rothen@ch.meggitt.com> Subject: g_vfs_done Message-ID: <48A46586.1F16.0013.0@ch.meggitt.com> References: <4874F53A0200001300130DE3@gw.vibro-meter.com> <48A465B10200001300132295@gw.vibro-meter.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a MIME message. If you are reading this text, you may want to
consider changing to a mail reader or gateway that understands how to
properly handle MIME multipart messages.
--=__Part4C65AD81.0__=
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Hello,
We are using FreeBSD 7.0-RELEASE #1 running Squid and Zabbix on vmware ESX =
3.0.2 and our vmware ESX servers access our SAN through IpStor cluster =
(Storage virtualization and mirroring).=20
We have 2 storages (EVA 6100) and the IpStor solution allows us to mirror =
disks on both EVAs.
We have a problem with both the Zabbix and Squid FreeBSD virtual machines, =
when the virtual machine is loosing its disks (EVA controller reboot or =
ipstor cluster failover), we have several "g_vfs_done() : da1s1d[WRITE(offs=
et=3D2312431234, length=3D12453)] error=3D 5" errors then the host is =
definitively frozen. The disk loss lasts 1-5 seconds. Windows virtual =
machines do freeze during the loss then continue working. On Windows we =
had to specify a longer timeout for local disk in registry.
Does anybody has an idea what could be tuned to avoid this problem ?
Attached you can find the dmesg and a screenshot of the g_vfs_done =
error...
Thanks in advance for your help
Best regards
Carole
Carole Macheret
System and Network Administrator
Vibro-Meter SA Switzerland
Phone: +41264071591
Email : Carole.Macheret@ch.meggitt.com
This e-mail may contain confidential information and/or copyright =
material. This e-mail is intended for the use of the addressee only. Any =
unauthorized use may be unlawful. If you receive this e-mail by mistake, =
please advise the sender immediately by using the reply facility in your =
e-mail software. Information contained in and/or attached to this document =
may be subject to Export Control Regulations of the European Community, =
USA or other countries. Each recipient of this document is responsible to =
ensure that usage and/or transfer of any information contained in this =
document complies with all relevant Export Control regulations. If you =
are in any doubt about the Export Control restrictions that apply to this =
information, please contact the sender immediately.=20
You should be aware that the contents of this e-mail may be monitored to =
ensure compliance with the Meggitt IT User policy.
--=__Part4C65AD81.0__=
Content-Type: text/plain; name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="dmesg.txt"
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #1: Wed Mar 26 12:28:11 CET 2008
roland@squidproxy.vm.lan:/usr/obj/usr/src/sys/SQUID
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 2218 (2600.07-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x40f13 Stepping =3D 3
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=3D0x2001<SSE3,CX16>
AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>=
AMD Features2=3D0x1<LAHF>
real memory =3D 1073741824 (1024 MB)
avail memory =3D 1037078528 (989 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Mar 26 2008 12:27:54)
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177=
,0x376,0x1050-0x105f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1060-0x106f mem 0xf8000000-0xfbfff=
fff,0xf4000000-0xf47fffff at device 15.0 on pci0
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1080-0x10ff mem 0xf4860000-0xf4=
860fff irq 9 at device 16.0 on pci0
mpt0: [ITHREAD]
mpt0: MPI Version=3D1.2.0.0
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x1070-0x1=
077 mem 0xf4820000-0xf483ffff,0xf4800000-0xf480ffff irq 11 at device 17.0 =
on pci0
em0: Memory Access and/or Bus Master bits were not set!
em0: Ethernet address: 00:50:56:81:20:59
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x1078-0x1=
07f mem 0xf4840000-0xf485ffff,0xf4810000-0xf481ffff irq 10 at device 18.0 =
on pci0
em1: Memory Access and/or Bus Master bits were not set!
em1: Ethernet address: 00:50:56:81:38:ac
em1: [FILTER]
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on =
acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0x=
cbfff,0xdc000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2600070771 Hz quality 800
Timecounters tick every 10.000 msec
hptrr: no controller detected.
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <VMware Virtual IDE CDROM Drive/00000001> at ata0-master =
UDMA33
da0 at mpt0 bus 0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device=20
da0: 3.300MB/s transfers
da0: Command Queueing Enabled
da0: 5632MB (11534336 512 byte sectors: 255H 63S/T 717C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device=20
da1: 3.300MB/s transfers
da1: Command Queueing Enabled
da1: 20480MB (41943040 512 byte sectors: 255H 63S/T 2610C)
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: optimization changed from SPACE to TIME
--=__Part4C65AD81.0__=--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48A46586.1F16.0013.0>