Date: Wed, 07 Jul 2004 19:01:18 +1200 From: Drew Broadley <drew@corrupt.co.nz> To: paul@rettersen.de Cc: freebsd-mobile@freebsd.org Subject: Re: D-Link DWL-650 Wireless PC Card RevP Message-ID: <40EB9FBE.3060408@corrupt.co.nz> In-Reply-To: <1150426305@web.de> References: <1150426305@web.de>
next in thread | previous in thread | raw e-mail | index | archive | help
paul@rettersen.de wrote: >Hi, > >i have a problem with my D-Link DWL-650 RevP PC Card on my 5.x-current. After putting the in i have the following message on my monitor: > >wi0: <D-Link DWL-650 Wireless PC Card RevP> at port 0x400 -0x407f irq 11 function 0 config 1 on pccard0 >wi0: [GIANT-LOCKED] >wi0: wi_cmd: busy bit won´t clear. >:init failed >device_attach: wi0 attach returned 6 > >According to the hardware_list - the current version supports this card - where could be the problem? > >I tried NDIS as well, but after "kldload ndis.ko" and "kldload if_ndis.ko" I have the same message as above and no "ndis0"-interfaces in addition. > >Anyone any idea? >Thanks in advance >-paul > > Have you done the following ? In /boot/loader.conf hw.cbb.start_memory="0x20000000" hw.pci.allow_unsupported_io_range=1 I know this generally is the fix to other problems, but my DWL-660 is working. wi0: <D-Link D-Link Air DWL-660 Wireless PC Card> at port 0x2080-0x20bf irq 11 function 0 config 1 on pccard0 wi0: [GIANT-LOCKED] wi0: using Lucent Technologies, WaveLAN/IEEE wi0: Lucent Firmware: Station (8.10.1) wi0: Ethernet address: 00:05:5d:24:96:17 wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40EB9FBE.3060408>