Date: Thu, 30 Sep 1999 00:42:55 +1000 From: jesse reynolds <jesse@va.com.au> To: freebsd-hardware@freebsd.org Subject: Fujitsu Laptop boot problems (Lifebook 735Dx) Message-ID: <v04205500b417c8bac8a3@[1.1.1.3]> In-Reply-To: <Pine.BSF.4.10.9908272003210.1358-100000@sasami.jurai.net> References: <Pine.BSF.4.10.9908272003210.1358-100000@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi folx
I'm trying to install FreeBSD 3.3 RELEASE on a Fujitsu Lifebook,
133MHz (MMX Pentium) laptop. If I choose "Continue without kernel
configuration" it gets a screen or two's way through the driver
inits, then it hits "wdc1" and pauses for about 10 seconds or so,
then a few lines flash up, then a quick flash of a screen full of
garbage, leaving the following:
...
zp0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x4d4d4d4d
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc02501f0
stack pointer = 0x10:0xc062bf6c
frame pointer = 0x10:0xc062bf74
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 ()
interrupt mask = net tty bio cam
trap number = 12
panic: page fault
Automatic reboot in 15 seconds - press a key on the console to abort
...
Is any of this useful? If so, what bits?
How do you go about tracking down which piece of hardware is causing grief?
This laptop has lots of bits on it, like USB, sound, power management
chips, blah blah blah.
cheers
jesse
--
Jesse Reynolds - Virtual Artists Pty Ltd - http://www.va.com.au
- http://virtual.artists
Mobile: (+61) 0414 669 790
Faxmail: (+61) 02 9776 3594 Virtual Community Engine
Email: jesse (at) va.com.au http://www.vce.net
?: http://jesse.va.com.au huh?: Content Management System
ICQ: 4766684 & Application Server for
Timezone: GMT +10:00 Hrs MacOS Webservers (W*API)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?v04205500b417c8bac8a3>