Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Sep 2004 09:36:08 +0400 (MSD)
From:      Stikheev Andrew <sand@zunet.ru>
To:        Julian Elischer <julian@elischer.org>
Cc:        iso-8859-1?Q?S=F8ren?= Schmidt <sos@DeepCore.dk>
Subject:   Re: ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611
Message-ID:  <20040920053609.65347.qmail@zunet.ru>
In-Reply-To: <414D3FFA.6090008@elischer.org>

next in thread | previous in thread | raw e-mail | index | archive | help
> David Schultz wrote:
> > On Sat, Sep 18, 2004, Stikheev Andrew wrote:
> > 
> >>[ Charset ISO-8859-1 unsupported, converting... ]
> >>
> >>>Stikheev Andrew wrote:
> >>>
> >>>>   Hi,
> >>>> 
> >>>>    I also have same problems, but only with SATA-disks with
> >>>>   SiI 3112 SATA150 controller (check it with two controllers - onboard
> >>>>   and pci) . Under heavy load on sata-disks system freezes.
> >>>
> >>>Thats a seprate issue with the sii3112 and your sources are way too old 
> >>>to compare with a new -current.
> >>>You sii3112 timeouts should actually be fixed now :)
> >>
> >>  
> >>   Hmm, I update system to last -current(16 Sep), no freezes yet, 
> >>   but too many messages like this:
> >>
> >>ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=3526743
> >>ad0: WARNING - WRITE_DMA no interrupt but good status
> > 
> > [...]
> > 
> >>ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=89221071
> >>ad6: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=114679887
> >>ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=114679887
> > 
> > 
> > FWIW, I've been seeing the same problem---WRITE_DMA timeouts on
> > ad4 and ad6, and both write and read timeouts on ad0.  The problem
> > occurs for 6-CURRENT as of 9/14.  It does not occur for BETA4.
> > I can try to narrow this down further if needed.  Here's some
> > information about the machine, which has ad4 and ad6 mirrored via ccd(4):
> 
> make sure you have preemption turned off.

   I turned off preemption and now i don't have messages about ad0,
   but messages about ad4 and ad6 still appear(but not so often) :
ad6: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=591
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=591
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=148701391

> 
> > 
> > atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> > ata0: channel #0 on atapci0
> > ata1: channel #1 on atapci0
> > atapci1: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18 at device 31.2 on pci0
> > ata2: channel #0 on atapci1
> > ata3: channel #1 on atapci1
> > [...]
> > ad0: 190782MB <WDC WD2000JB-00DUA3/75.13B75> [387621/16/63] at ata0-master UDMA100
> > ad4: 35304MB <WDC WD360GD-00FNA0/35.06K35> [71730/16/63] at ata2-master SATA150
> > ad6: 35304MB <WDC WD360GD-00FNA0/35.06K35> [71730/16/63] at ata3-master SATA150
> > 
> > das@VARK:/home/t/freebsd/vark/src/usr.bin/systat> vmstat -i
> > interrupt                          total       rate
> > irq1: atkbd0                       17607          3
> > irq4: sio0                             2          0
> > irq6: fdc0                            10          0
> > irq8: rtc                         734353        127
> > irq12: psm0                         3332          0
> > irq13: npx0                            1          0
> > irq14: ata0                       278748         48
> > irq18: em0 uhci2+                 485861         84
> > irq19: pcm0 uhci1                      2          0
> > irq0: clk                         573674         99
> > Total                            2093590        364
> > _______________________________________________
> > freebsd-current@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
> 
> 
> 

-- 
                                        Best regards,   
                                        Stihkeev Andrew 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040920053609.65347.qmail>