Date: Mon, 11 Sep 2006 07:48:53 GMT From: Timo Schoeler <timo.schoeler@riscworks.net> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/103125: ACPI bad reads/writes occur since upgrading from 6.1-RELEASE to -STABLE Message-ID: <200609110748.k8B7mrnc088262@www.freebsd.org> Resent-Message-ID: <200609110750.k8B7oS3w041269@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 103125 >Category: kern >Synopsis: ACPI bad reads/writes occur since upgrading from 6.1-RELEASE to -STABLE >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Sep 11 07:50:23 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Timo Schoeler >Release: FreeBSD 6.1-STABLE >Organization: RISCworks >Environment: FreeBSD aldebaran.riscworks.net 6.1-STABLE FreeBSD 6.1-STABLE #0: Mon Sep 11 08:54:29 CEST 2006 root@aldebaran.riscworks.net:/usr/obj/usr/src/sys/ALDEBARAN_MP i386 >Description: hi, since i upgraded from -RELEASE to -STABLE following entries occur (the 'bad' ones are new -- they didn't show up on -RELEASE; i have three machines of this type, all show the same problem): acpi0: <PTLTD RSDT> on motherboard acpi: bad write to port 0xcf8 (32), val 0x80000070 acpi: bad read from port 0xcfc (32) acpi0: Power Button (fixed) acpi: bad write to port 0xcf8 (32), val 0x80000344 acpi: bad read from port 0xcfc (32) acpi: bad read from port 0xcfc (32) full dmesg here: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #0: Mon Sep 11 08:54:29 CEST 2006 root@aldebaran.riscworks.net:/usr/obj/usr/src/sys/ALDEBARAN_MP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1023 MB) avail memory = 1041559552 (993 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD RSDT> on motherboard acpi: bad write to port 0xcf8 (32), val 0x80000070 acpi: bad read from port 0xcfc (32) acpi0: Power Button (fixed) unknown: I/O range not supported acpi: bad write to port 0xcf8 (32), val 0x80000344 acpi: bad read from port 0xcfc (32) acpi: bad read from port 0xcfc (32) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 0.1 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) atapci0: <Promise PDC40718 SATA300 controller> port 0x1400-0x147f,0x1000-0x10ff mem 0xe8121000-0xe8121fff,0xe8100000-0xe811ffff irq 18 at device 2.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1480-0x14bf mem 0xe8122000-0xe8122fff,0xe8000000-0xe80fffff irq 26 at device 7.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:10:83:ff:e1:5a isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <ServerWorks ROSB4 UDMA33 controller> port 0x170-0x177,0x376,0x14c0-0x14cf at device 15.1 on pci0 ata6: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pcib2: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib2 ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xf8004000-0xf8004fff irq 22 at device 1.0 on pci2 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs skc0: <SysKonnect Gigabit Ethernet (V1.0)> port 0x2000-0x20ff mem 0xf8000000-0xf8003fff irq 24 at device 2.0 on pci2 skc0: Allied Telesyn AT-2970SX Gigabit Ethernet Adapter rev. (0x0) sk0: <XaQti Corp. XMAC II> on skc0 sk0: Ethernet address: 00:0a:d2:39:d9:14 miibus1: <MII bus> on sk0 xmphy0: <XaQti Corp. XMAC II gigabit interface> on miibus1 xmphy0: 1000baseSX, 1000baseSX-FDX, auto sk1: <XaQti Corp. XMAC II> on skc0 sk1: Ethernet address: 00:0a:d2:39:d9:15 miibus2: <MII bus> on sk1 xmphy1: <XaQti Corp. XMAC II gigabit interface> on miibus2 xmphy1: 1000baseSX, 1000baseSX-FDX, auto acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: <floppy drive controller> port 0-0x5,0 on acpi0 fdc0: cannot reserve interrupt line device_attach: fdc0 attach returned 6 fdc0: <floppy drive controller> port 0-0x5,0 on acpi0 fdc0: cannot reserve interrupt line device_attach: fdc0 attach returned 6 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcc000-0xd0fff,0xe0000-0xe3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: CDROM <FX4830T/R02J> at ata1-master UDMA33 ad6: 239372MB <WDC WD2500YD-01NVB1 10.02E01> at ata3-master SATA300 GEOM_MIRROR: Device gm1 created (id=3217152580). GEOM_MIRROR: Device gm1: provider ad6 detected. ad10: 239372MB <WDC WD2500YD-01NVB1 10.02E01> at ata5-master SATA300 GEOM_MIRROR: Device gm1: provider ad10 detected. GEOM_MIRROR: Device gm1: provider ad10 activated. GEOM_MIRROR: Device gm1: provider ad6 activated. GEOM_MIRROR: Device gm1: provider mirror/gm1 launched. da0 at ahc0 bus 0 target 0 lun 0 da0: <FUJITSU MAG3182LC 5210> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17429MB (35694860 512 byte sectors: 255H 63S/T 2221C) da1 at ahc0 bus 0 target 1 lun 0 da1: <FUJITSU MAG3182LC 5210> Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 17429MB (35694860 512 byte sectors: 255H 63S/T 2221C) SMP: AP CPU #1 Launched! GEOM_MIRROR: Device gm0 created (id=3832172933). GEOM_MIRROR: Device gm0: provider da0 detected. GEOM_MIRROR: Device gm0: provider da1 detected. GEOM_MIRROR: Device gm0: provider da1 activated. GEOM_MIRROR: Device gm0: provider da0 activated. GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. Trying to mount root from ufs:/dev/mirror/gm0s1a IP Filter: v4.1.13 initialized. Default = pass all, Logging = enabled >How-To-Repeat: build -STABLE, install, boot. >Fix: yes, please. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200609110748.k8B7mrnc088262>