Date: Mon, 08 Mar 1999 09:40:36 -0600 From: Joe Nall <joe@nall.com> To: freebsd-questions@FreeBSD.ORG Subject: Bad DMI table checksum! Message-ID: <36E3EF74.EB60A0F5@nall.com>
next in thread | raw e-mail | index | archive | help
In my dmesg I see the following error:
Bad DMI table checksum!
Why? What does it mean?
Machine is a IBM PR300 on a TX Pro motherboard. CVSuped last night.
Full dmesg:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 3.1-STABLE #19: Mon Mar 8 09:31:00 CST 1999
joe@benedict.nall.com:/usr/src/sys/compile/benedict
Timecounter "i8254" frequency 1193182 Hz
CPU: Cyrix 6x86MX (224.88-MHz 686-class CPU)
Origin = "CyrixInstead" Id = 0x600 Stepping=0 DIR=0x0853
Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX>
real memory = 66060288 (64512K bytes)
avail memory = 61554688 (60112K bytes)
Bad DMI table checksum!
Preloaded elf kernel "kernel" at 0xf029b000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1039 device=5597)> rev 0x10 on
pci0.0.0
chip1: <SiS 85c503> rev 0x01 on pci0.1.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0xd0 int a irq 0
on pci0.1.1
xl0: <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0x30 int a irq 11
on pci0.13.0
xl0: command never completed!
xl0: Ethernet address: 00:10:5a:18:77:22
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
vga0: <SiS model 0200 VGA-compatible display device> rev 0x68 int a irq
0 on pci0.20.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG SV0643A>
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s1a
thanks,
joe nall
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36E3EF74.EB60A0F5>