Date: Wed, 9 Jun 2004 13:40:23 GMT From: Heikki Suonsivu <hsu@bbnetworks.net> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/66290: pccard initialization fails with "bad Vcc request" Message-ID: <200406091340.i59DeN60009256@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/66290; it has been noted by GNATS.
From: Heikki Suonsivu <hsu@bbnetworks.net>
To: freebsd-gnats-submit@FreeBSD.org, lee_dilkie@mitel.com
Cc:
Subject: Re: kern/66290: pccard initialization fails with "bad Vcc request"
Date: Wed, 09 Jun 2004 16:37:46 +0300
Metoo: Compaq Presario 1920, with couple of last snapshots (24.5.2004
the last tried).
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT-20040524-JPSNAP #0: Mon May 24 01:56:24 GMT 2004
root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09a1000.
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 298649085 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.65-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201326592 (192 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000000bc6ffff, 184840192 bytes (45127 pages)
avail memory = 187330560 (178 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6b30
bios32: Entry = 0xfd7b0 (c00fd7b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7b0+0x225
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry = f0000:986d Rev = 1.0
pnpbios: Event flag at 4b4
pnpbios: OEM ID 20b1110e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdf50
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 7
embedded 0 7 B 0x61 9
embedded 0 7 C 0x62 4 7 10
embedded 0 7 D 0x63 10
embedded 0 1 A 0x61 9
embedded 0 1 B 0x63 10
embedded 1 0 A 0x61 9
embedded 1 0 B 0x63 10
embedded 0 8 A 0x61 9
embedded 0 8 B 0x61 9
embedded 0 11 A 0x62 4 7 10
embedded 0 9 A 0x60 3 4 7
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Entry 0.7.INTA has different mask for link 0x60, merging
$PIR: Entry 0.7.INTB has different mask for link 0x61, merging
$PIR: Entry 0.7.INTC has different mask for link 0x62, merging
$PIR: Entry 0.7.INTD has different mask for link 0x63, merging
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 3 3 4 7
0x61 255 N 6 9
0x62 255 N 3 4 7 10
0x63 255 N 4 10
$PIR: Found matching pin for 0.7.INTD at func 2: 10
$PIR: Found matching pin for 1.0.INTA at func 0: 9
$PIR: Found matching pin for 1.0.INTB at func 1: 10
$PIR: Found matching pin for 0.8.INTA at func 0: 9
$PIR: Found matching pin for 0.9.INTA at func 0: 3
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 3 Y 3 3 4 7
0x61 9 N 6 9
0x62 255 N 3 4 7 10
0x63 10 N 4 10
$PIR: IRQs used by BIOS: 3 9 10
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 3 0 0 0 0 0 6 4 0 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001050, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001060, size 5, enabled
$PIR: 0:7 INTD routed to irq 10
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[90]: type 4, range 32, base 00001040, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 00000000, size 12, enabled
$PIR: 0:8 INTA routed to irq 9
found-> vendor=0x104c, dev=0xac19, revid=0x00
bus=0, slot=8, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
$PIR: 0:8 INTA routed to irq 9
found-> vendor=0x104c, dev=0xac19, revid=0x00
bus=0, slot=8, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f4000000, size 8, enabled
map[14]: type 4, range 32, base 00001080, size 3, enabled
map[18]: type 4, range 32, base 00001400, size 8, enabled
$PIR: 0:9 INTA routed to irq 3
found-> vendor=0x11c1, dev=0x0441, revid=0x01
bus=0, slot=9, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=3
powerspec 2 supports D0 D2 D3 current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf4100000-0xf47fffff
pcib1: prefetched decode 0xf4800000-0xf5ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f5000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xf5000000-0xf5ffffff
map[14]: type 1, range 32, base f4400000, size 22, enabled
pcib1: device (null) requested decoded memory range 0xf4400000-0xf47fffff
map[18]: type 1, range 32, base f4100000, size 20, enabled
pcib1: device (null) requested decoded memory range 0xf4100000-0xf41fffff
$PIR: 1:0 INTA routed to irq 9
found-> vendor=0x10c8, dev=0x0005, revid=0x20
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0207, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f4800000, size 22, enabled
pcib1: device (null) requested decoded memory range 0xf4800000-0xf4bfffff
map[14]: type 1, range 32, base f4200000, size 20, enabled
pcib1: device (null) requested decoded memory range 0xf4200000-0xf42fffff
$PIR: 1:0 INTB routed to irq 10
found-> vendor=0x10c8, dev=0x8005, revid=0x20
bus=1, slot=0, func=1
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0202, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <multimedia, audio> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1050-0x105f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1050
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x04 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq
10 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1060
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x1040-0x104f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
cbb0: <TI1221 PCI-CardBus Bridge> irq 9 at device 8.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: bad Vcc request. ctrl=0xf000ff00, status=0xf000e2c3
cbb_power: 0V
cbb0: PCI Configuration space:
0x00: 0xac19104c 0x02100007 0x06070000 0x00822000
0x10: 0x00000000 0x020000a0 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400109
0x40: 0xb0c50e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x68649061 0x00000000 0x00000000 0x01001c00
0x90: 0x604682c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x00000004 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1221 PCI-CardBus Bridge> irq 9 at device 8.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x1000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: bad Vcc request. ctrl=0xf200f00, status=0xf200f20
cbb_power: 0V
cbb1: PCI Configuration space:
0x00: 0xac19104c 0x02100007 0x06070000 0x00822000
0x10: 0x00001000 0x020000a0 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400109
0x40: 0xb0c50e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x68649061 0x00000000 0x00000000 0x01001c00
0x90: 0x604682c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x00000004 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <simple comms> at device 9.0 (no driver attached)
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
NMX2210: start dependent (0)
NMX2210: adding io range 0x220-0x22f, size=0x10, align=0x10
NMX2210: adding io range 0x530-0x537, size=0x8, align=0x8
NMX2210: adding io range 0x388-0x38b, size=0x4, align=0x4
NMX2210: adding io range 0x330-0x331, size=0x2, align=0x2
NMX2210: adding io range 0x370-0x371, size=0x2, align=0x2
NMX2210: adding irq mask 0x20
NMX2210: adding dma mask 0x1
NMX2210: adding dma mask 0x2
NMX2210: start dependent (1)
NMX2210: adding io range 0x220-0x22f, size=0x10, align=0x10
NMX2210: adding io range 0x530-0x537, size=0x8, align=0x8
NMX2210: adding io range 0x388-0x38b, size=0x4, align=0x4
NMX2210: adding io range 0x300-0x331, size=0x2, align=0x10
NMX2210: adding io range 0x100-0xfff, size=0x2, align=0x2
NMX2210: adding irq mask 0xa0
NMX2210: adding dma mask 0x1
NMX2210: adding dma mask 0x2
NMX2210: start dependent (2)
NMX2210: adding io range 0x220-0x28f, size=0x10, align=0x10
NMX2210: adding io range 0x530-0x74f, size=0x8, align=0x8
NMX2210: adding io range 0x388-0x3ab, size=0x4, align=0x8
NMX2210: adding io range 0x300-0x335, size=0x2, align=0x2
NMX2210: adding io range 0x100-0xfff, size=0x2, align=0x2
NMX2210: adding irq mask 0xea8
NMX2210: adding dma mask 0xb
NMX2210: adding dma mask 0xb
NMX2210: end dependent
NMX2220: start dependent (0)
NMX2220: adding io range 0x201-0x201, size=0x1, align=0x1
NMX2220: start dependent (2)
NMX2220: adding io range 0x201-0x20f, size=0x1, align=0x1
NMX2220: end dependent
ex_isa_identify()
unknown: status reg test failed fe
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 18 devices, largest 186 bytes
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1000-0x103f, size=0x40, align=0x1
PNP0c02: adding io range 0x1040-0x104f, size=0x10, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x90-0x92, size=0x3, align=0x1
PNP0c02: adding io range 0x94-0x98, size=0x5, align=0x1
PNP0c02: adding io range 0x9f-0x9f, size=0x1, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xb5, size=0x6, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding io range 0x10-0x11, size=0x2, align=0x1
PNP0200: adding io range 0x12-0x13, size=0x2, align=0x1
PNP0200: adding io range 0x14-0x15, size=0x2, align=0x1
PNP0200: adding io range 0x16-0x17, size=0x2, align=0x1
PNP0200: adding io range 0x18-0x1f, size=0x8, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000
pnpbios: handle 6 device ID PNP0c01 (010cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000
pnpbios: handle 11 device ID PNP0c02 (020cd041)
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 13 device ID PNP0f13 (130fd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0400: adding irq mask 0x80
pnpbios: handle 16 device ID PNP0400 (0004d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 18 device ID PNP0700 (0007d041)
pnpbios: handle 20 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0045
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x21 0x31 0x21 0x21
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x21 0x21 0x21 0x21
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is
0x230. Failing probe.
unknown: <NeoMagic MagicWave 3D Sound System> failed to probe at port
0x370-0x371,0x330-0x331,0x388-0x38b,0x530-0x537,0x220-0x22f irq 5 drq
1,0 on isa0
adv1: Invalid baseport of 0x201 specified. Nearest valid baseport is
0x210. Failing probe.
unknown: <NeoMagic MagicWave 3D Sound System> failed to probe at port
0x201 on isa0
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1 on isa0
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is
0x330. Failing probe.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0e03> failed to probe on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 298649085 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cbb1: bad Vcc request. ctrl=0xf200f33, status=0xf200f20
cbb_power: 3V
cbb1: bad Vcc request. ctrl=0xf200f00, status=0xf200f20
cbb_power: 0V
cbb1: CardBus card activation failed
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IC25N030ATCS04-0/CA3OA70A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <TOSHIBA DVD-ROM SD-C2102/1029> DVDROM drive at ata1 as master
acd0: read 3445KB/s (3445KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/239/63 s:63 l:20487537
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/239/63 s:20487600 l:37679040
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:160 s(CHS):1023/255/63 e(CHS):1023/239/63 s:58166640 l:438480
GEOM: Configure ad0s1, start 32256 length 10489618944 end 10489651199
GEOM: Configure ad0s2, start 10489651200 length 19291668480 end 29781319679
GEOM: Configure ad0s4, start 29781319680 length 224501760 end 30005821439
GEOM: Configure ad0s2a, start 0 length 3221225472 end 3221225471
GEOM: Configure ad0s2b, start 3221225472 length 1073741824 end 4294967295
GEOM: Configure ad0s2c, start 0 length 19291668480 end 19291668479
GEOM: Configure ad0s2e, start 4294967296 length 14996701184 end 19291668479
Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406091340.i59DeN60009256>