Date: Wed, 17 Jan 2001 22:48:31 +1100 From: sam wun <swun@esec.com.au> To: "O. Hartmann" <ohartman@ipamzlx.physik.uni-mainz.de> Cc: freebsd-stable@freebsd.org Subject: Re: shutdown problems in 4.2-STABLE Message-ID: <3A65868E.2CE114AD@esec.com.au> References: <Pine.BSF.4.21.0101171235100.68429-100000@ipamzlx.physik.uni-mainz.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--------------AADDAFA1BB5852766D9DF480
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
You will need to recomplie your kernel config file with the following options:
device apm0 at nexus? flags 0x20 # Advanced Power Management
"O. Hartmann" wrote:
> Dear Sirs.
>
> One of our UNIX machines running FreeBSD 4.2-STABLE (cvsupdated today)
> has permanent shutdown problems.
>
> The phenomenon:
>
> When typing "shutdown -r now" the system reports shutting down immediately.
> But it never shuts down. There is also no shutdown process. The only way to
> reboot is "reboot". Otherwise system is always up, without reporting anymore
> that it will be shutting down.
>
> This is the dmesg output:
>
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.2-STABLE #0: Wed Jan 17 10:54:41 CET 2001
> root@wetter.physik.uni-mainz.de:/usr/local/obj/usr/src/sys/WETTER
> Timecounter "i8254" frequency 1193191 Hz
> CPU: AMD Athlon(tm) Processor (807.19-MHz 686-class CPU)
> Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
> real memory = 268353536 (262064K bytes)
> avail memory = 257703936 (251664K bytes)
> Preloaded elf kernel "kernel" at 0xc0351000.
> Preloaded elf module "agp.ko" at 0xc035109c.
> Pentium Pro MTRR support enabled
> apm0: <APM BIOS> on motherboard
> apm: found APM BIOS v1.2, connected at v1.2
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <VIA Generic host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
> pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
> pci1: <PCI bus> on pcib2
> pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
> isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <VIA 83C572 USB controller> at 4.2 irq 5
> pci0: <VIA 83C572 USB controller> at 4.3 irq 5
> fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xdf000000-0xdf0fffff,0xdf800000-0xdf800fff irq 10 at device 11.0 on pci0
> fxp0: Ethernet address 00:02:b3:17:99:90
> atapci1: <Promise ATA100 controller> port 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem 0xde800000-0xde81ffff irq 10 at device 17.0 on
> pci0
> ata2: at 0xa000 on atapci1
> ata3: at 0x9400 on atapci1
> pcib1: <Host to PCI bridge> on motherboard
> pci2: <PCI bus> on pcib1
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> on isa0
> sc0: VGA <8 virtual consoles, flags=0x200>
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> DUMMYNET initialized (000608)
> IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
> IPsec: Initialized Security Association Processing.
> ata1-slave: ata_command: timeout waiting for intr
> ata1-slave: identify failed
> ata3-slave: ata_command: timeout waiting for intr
> ata3-slave: identify failed
> ata3-master: ata_command: timeout waiting for intr
> ata3-master: identify failed
> ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master UDMA100
> acd0: CDROM <CD-ROM 48X/AKH> at ata1-master using WDMA2
> Mounting root from ufs:/dev/ad4s1a
>
> Does anyone have any idea what's going on?
>
> Thanks in advance,
>
> Oliver
>
> -
> MfG
> O. Hartmann
> -------------------------------------------------------------------
> ohartman@ipamzlx.physik.uni-mainz.de
>
> Klimadatenserver-Abteilung des IPA
> IT Netz- und Systembetreuung
> Johannes Gutenberg-Universitaet Mainz
> Becherweg 21
> D-55099 Mainz
>
> Tel: +496131/3924662 (Maschinensaal)
> Tel: +496131/3924144
> FAX: +496131/3923532
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
--
Sam Wun Firewalls / Security
Software Engineer (Snr) Electronic Commerce
eSec Limited Phone: +61 3 83715376 (Direct)
Mobile: 0403 381 621
mailto:swun@eSec.com.au C++/JAVA/UNIX/OOP/OOD
--------------AADDAFA1BB5852766D9DF480
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
You will need to recomplie your kernel config file with the following options:
<br>device apm0
at nexus? flags 0x20 # Advanced Power Management
<p>"O. Hartmann" wrote:
<blockquote TYPE=CITE>Dear Sirs.
<p>One of our UNIX machines running FreeBSD 4.2-STABLE (cvsupdated today)
<br>has permanent shutdown problems.
<p>The phenomenon:
<p>When typing "shutdown -r now" the system reports shutting down immediately.
<br>But it never shuts down. There is also no shutdown process. The only
way to
<br>reboot is "reboot". Otherwise system is always up, without reporting
anymore
<br>that it will be shutting down.
<p>This is the dmesg output:
<p>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
<br> The Regents of the University
of California. All rights reserved.
<br>FreeBSD 4.2-STABLE #0: Wed Jan 17 10:54:41 CET 2001
<br> root@wetter.physik.uni-mainz.de:/usr/local/obj/usr/src/sys/WETTER
<br>Timecounter "i8254" frequency 1193191 Hz
<br>CPU: AMD Athlon(tm) Processor (807.19-MHz 686-class CPU)
<br> Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
<br> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
<br> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
<br>real memory = 268353536 (262064K bytes)
<br>avail memory = 257703936 (251664K bytes)
<br>Preloaded elf kernel "kernel" at 0xc0351000.
<br>Preloaded elf module "agp.ko" at 0xc035109c.
<br>Pentium Pro MTRR support enabled
<br>apm0: <APM BIOS> on motherboard
<br>apm: found APM BIOS v1.2, connected at v1.2
<br>npx0: <math processor> on motherboard
<br>npx0: INT 16 interface
<br>pcib0: <Host to PCI bridge> on motherboard
<br>pci0: <PCI bus> on pcib0
<br>agp0: <VIA Generic host to PCI bridge> mem 0xe4000000-0xe7ffffff
at device 0.0 on pci0
<br>pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0
on pci0
<br>pci1: <PCI bus> on pcib2
<br>pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
<br>isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
<br>isa0: <ISA bus> on isab0
<br>atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device
4.1 on pci0
<br>ata1: at 0x170 irq 15 on atapci0
<br>pci0: <VIA 83C572 USB controller> at 4.2 irq 5
<br>pci0: <VIA 83C572 USB controller> at 4.3 irq 5
<br>fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xdf000000-0xdf0fffff,0xdf800000-0xdf800fff
irq 10 at device 11.0 on pci0
<br>fxp0: Ethernet address 00:02:b3:17:99:90
<br>atapci1: <Promise ATA100 controller> port 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007
mem 0xde800000-0xde81ffff irq 10 at device 17.0 on
<br>pci0
<br>ata2: at 0xa000 on atapci1
<br>ata3: at 0x9400 on atapci1
<br>pcib1: <Host to PCI bridge> on motherboard
<br>pci2: <PCI bus> on pcib1
<br>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
<br>atkbd0: <AT Keyboard> irq 1 on atkbdc0
<br>kbd0 at atkbd0
<br>psm0: <PS/2 Mouse> irq 12 on atkbdc0
<br>psm0: model IntelliMouse, device ID 3
<br>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on isa0
<br>sc0: <System console> on isa0
<br>sc0: VGA <8 virtual consoles, flags=0x200>
<br>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on isa0
<br>fdc0: FIFO enabled, 8 bytes threshold
<br>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
<br>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
<br>sio0: type 16550A
<br>sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
<br>sio1: type 16550A
<br>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
<br>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
<br>ppc0: FIFO with 16/16/8 bytes threshold
<br>lpt0: <Printer> on ppbus0
<br>lpt0: Interrupt-driven port
<br>DUMMYNET initialized (000608)
<br>IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to deny, unlimited logging
<br>IPsec: Initialized Security Association Processing.
<br>ata1-slave: ata_command: timeout waiting for intr
<br>ata1-slave: identify failed
<br>ata3-slave: ata_command: timeout waiting for intr
<br>ata3-slave: identify failed
<br>ata3-master: ata_command: timeout waiting for intr
<br>ata3-master: identify failed
<br>ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master UDMA100
<br>acd0: CDROM <CD-ROM 48X/AKH> at ata1-master using WDMA2
<br>Mounting root from ufs:/dev/ad4s1a
<p>Does anyone have any idea what's going on?
<p>Thanks in advance,
<p>Oliver
<p>-
<br>MfG
<br>O. Hartmann
<br>-------------------------------------------------------------------
<br>ohartman@ipamzlx.physik.uni-mainz.de
<p>Klimadatenserver-Abteilung des IPA
<br>IT Netz- und Systembetreuung
<br>Johannes Gutenberg-Universitaet Mainz
<br>Becherweg 21
<br>D-55099 Mainz
<p>Tel: +496131/3924662 (Maschinensaal)
<br>Tel: +496131/3924144
<br>FAX: +496131/3923532
<p>To Unsubscribe: send mail to majordomo@FreeBSD.org
<br>with "unsubscribe freebsd-stable" in the body of the message</blockquote>
<pre>--
Sam Wun Firewalls / Security
Software Engineer (Snr) Electronic Commerce
eSec Limited Phone: +61 3 83715376 (Direct)
Mobile: 0403 381 621
<A HREF="mailto:swun@eSec.com.au">mailto:swun@eSec.com.au</A> C++/JAVA/UNIX/OOP/OOD</pre>
</html>
--------------AADDAFA1BB5852766D9DF480--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A65868E.2CE114AD>