Date: Tue, 13 Jan 2004 16:55:21 +0800 (MYT) From: Dinesh Nair <dinesh@alphaque.com> To: FreeBSD-gnats-submit@FreeBSD.org Cc: dinesh@alphaque.com Subject: kern/61300: [patch] Enabling HomePNA PHY on aue(4) for HomePNA connections Message-ID: <200401130855.i0D8tL7t046489@prophet.alphaque.com> Resent-Message-ID: <200401130900.i0D90TtU042334@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 61300 >Category: kern >Synopsis: [patch] Enabling HomePNA PHY on aue(4) for HomePNA connections >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jan 13 01:00:29 PST 2004 >Closed-Date: >Last-Modified: >Originator: Dinesh Nair >Release: FreeBSD 4.9-STABLE i386 >Organization: www.alphaque.com >Environment: System: FreeBSD prophet.alphaque.com 4.9-STABLE FreeBSD 4.9-STABLE #14: Thu Jan 8 21:14:15 MYT 2004 dinesh@prophet.alphaque.com:/usr/src/sys/compile/ALPHAQUE i386 >Description: The ADMtek AN986 Pegasus USB Ethernet driver aue(4) currently has no support for the HomePNA PHY interface for the PegasusII chipset. This means that users who are using this USB device for HomePNA usage will not be able to do so. The following patch addresses this lack of functionality by enabling the HomePNA PHY with the 'ifconfig aueX media homepna' command, and enabling the Ethernet PHY with the 'ifconfig aueX media auto' command. auto is also synonymous with 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX. Reference was made to the ADM8511 Datasheet at http://www.admtek.com.tw/download/nic/adm8511/ADM8511_DSH_204.pdf. Do note that upon USB attach, the HomePNA PHY is disabled and the Ethernet PHY is enabled by default. This PR contains a patch to /usr/src/sys/dev/usb/if_aue.c to enable the HomePNA PHY as per the Description above. >How-To-Repeat: Attach device to USB and configure for HomePNA >Fix: Apply the following patch to /usr/src/sys/dev/usb/if_aue.c --- if_aue.c.patch begins here --- --- if_aue.c.org Thu Jan 8 19:29:27 2004 +++ if_aue.c Fri Jan 9 01:55:48 2004 @@ -118,7 +118,7 @@ { USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_USB320_EC, 0 }, { USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_SS1001, PII }, { USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUS, PNA }, - { USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUSII, PII }, + { USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUSII, PNA|PII }, { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_USB2LAN, PII }, { USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB100, 0 }, { USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USBLP100, PNA }, @@ -492,6 +492,26 @@ mii = device_get_softc(sc->aue_miibus); AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB|AUE_CTL0_TX_ENB); + + /* + * If media type is set to HomePNA, + * set GPIO0 and GPI01 output value to 1 and + * enable MII and USB test mode + * + * Patched by Dinesh Nair <dinesh@alphaque.com> + * Fri Jan 9 01:55:25 MYT 2004 + * + */ + if (IFM_SUBTYPE(mii->mii_media_active) == IFM_homePNA) { + if (sc->aue_info->aue_flags & (PNA|PII)) { + csr_write_1(sc, AUE_GPIO1, 0x34); + csr_write_1(sc, AUE_REG_81, 6); + } + } else { + csr_write_1(sc, AUE_GPIO1, 0x26); + csr_write_1(sc, AUE_REG_81, 2); + } + if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) { AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL); } else { @@ -576,12 +596,10 @@ /* Magic constants taken from Linux driver. */ csr_write_1(sc, AUE_REG_1D, 0); csr_write_1(sc, AUE_REG_7B, 2); -#if 0 - if ((sc->aue_flags & HAS_HOME_PNA) && mii_mode) - csr_write_1(sc, AUE_REG_81, 6); - else -#endif + + if (sc->aue_info->aue_flags & PNA) { csr_write_1(sc, AUE_REG_81, 2); + } } Static void --- if_aue.c.patch ends here --- >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200401130855.i0D8tL7t046489>