Date: Mon, 25 Sep 2000 21:45:08 +0200 From: "Johan Huldtgren" <johan.huldtgren@rixtelecom.se> To: <questions@FreeBSD.ORG> Subject: Some Questions Message-ID: <ELEFIKONFJLHDALNCBNDMEKFCDAA.johan.huldtgren@rixtelecom.se> In-Reply-To: <20000925105641.B26892@agamemnon.informatik.rwth-aachen.de>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0004_01C02739.DFBDC930
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
I today have a system consising of two hard drives, one 8 GB primary master,
and an 18 GB primary slave. The master has FreeBSD 4.1-Stable, the slave has
Windows 2000. Now I just reinstalled the FreeBSD drive because I wanted to
set up a dual boot between the two OS's. I installed everything and when I'm
done I reboot, but I just get the blinking underscore and nothing happens. I
figured I forgot to set the partition active and I do everything again, same
result. I try 3 or 4 more times without any avail. I had set this system up
earlier the same way but without the FreeBSD boot amnager, so my guess is
that therein lies the problem. I reinstall but this time choose the second
alternative after partitioning my harddrive(no boot manager) Works like a
charm(as it normally does). Now my problem is if I want to boot w2k, which I
need for some of the work I do, I have to disconnect the primary master
drive. This was exactly what I had before and was what I was hoping to
eliminate. Is there a way to install the FreeBSD bootloader post-install?
Are there any known problems having the two operating systems on separate
physical drives?
My second queestion is about licq. I had this installed before but after my
reinstall I can not get it to install. I end up with an error code 1 but no
real explanation of what went wrong, the problem seems to deal with the qt
lib, this is however installed. The output is attached.
Finally I find the X-windows seems to lag a lot, say for example that I grab
my xterm and drag it from one end to the other, the lag is not clearly
visible and quite annoying. It's even worse if for example I have two
xterms, in one I have a text scrolling(eg a large file that I've more:d and
then hit spacebar a couple of times), during this time my mouse pointer will
dissapear(at least for a couple of moments every couple of seconds) and
draging the other xterm across the screen is almost impossible. I suspect
that the graphics card is to blame for this, my graphics card is an ATI 3D
RAGE PRO AGP 2X integrated on my motherboard. The one that I can find in
XF86Setup that works is the ATI 128 Generic card. The monitor settings are
those specified in the manual for it.
uname, and dmesg are attached at the bottom.
Thanks,
- Johan
Various data:
%uname
FreeBSD vaticide.telia.com 4.1-STABLE FreeBSD 4.1-STABLE #0: Sun Sep 24
17:40:05 GMT 2000 satan@vaticide.telia.com:/usr/obj/usr/src/sys/OND
i386
%dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Sun Sep 24 17:40:05 GMT 2000
satan@vaticide.telia.com:/usr/obj/usr/src/sys/OND
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory = 335519744 (327656K bytes)
avail memory = 321966080 (314420K bytes)
Preloaded elf kernel "kernel" at 0xc0443000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x9030-0x903f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f irq 9 at
device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Logitech, Inc. QuickCam, rev 1.00/1.00, addr 2
chip1: <Intel 82371AB Power management controller> port 0x800-0x80f at
device 7.3 on pci0
pci0: <unknown card> (vendor=0x125d, dev=0x1969) at 13.0 irq 11
de0: <Digital 21140A Fast Ethernet> port 0x7400-0x747f mem
0x80100000-0x8010007f irq 10 at device 14.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:42:36:34
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 8207MB <ST38641A> [16676/16/63] at ata0-master using UDMA33
ad1: 17206MB <IBM-DJNA-371800> [34960/16/63] at ata0-slave using UDMA33
acd0: CD-RW <RICOH CD-R/RW MP7040A> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
de0: enabling 10baseT port
------=_NextPart_000_0004_01C02739.DFBDC930
Content-Type: application/octet-stream;
name="licq"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="licq"
Script started on Sun Sep 24 21:19:37 2000=0A=
bash-2.04# mae=08 =08ke install
=3D=3D=3D> Configuring for licq-0.85
loading cache ./config.cache
checking host system type... i386-unknown-freebsdelf4.1
checking target system type... i386-unknown-freebsdelf4.1
checking build system type... i386-unknown-freebsdelf4.1
checking for a BSD compatible install... /usr/bin/install -c -o root -g =
wheel
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... found
checking for gcc... (cached) cc
checking whether the C compiler (cc -O3 -pipe -march=3Dpentiumpro ) =
works... yes
checking whether the C compiler (cc -O3 -pipe -march=3Dpentiumpro ) is a =
cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether cc accepts -g... (cached) yes
checking how to run the C preprocessor... (cached) cc -E
checking for c++... (cached) c++
checking whether the C++ compiler (c++ -O3 -pipe -march=3Dpentiumpro ) =
works... yes
checking whether the C++ compiler (c++ -O3 -pipe -march=3Dpentiumpro ) =
is a cross-compiler... no
checking whether we are using GNU C++... (cached) yes
checking whether c++ accepts -g... (cached) yes
checking whether c++ accepts -fno-rtti -fno-exceptions -fno-check-new... =
yes
checking how to run the C++ preprocessor... (cached) c++ -E
checking for POSIXized ISC... no
checking whether make sets ${MAKE}... (cached) yes
checking for a BSD compatible install... /usr/bin/install -c -o root -g =
wheel
checking for ranlib... (cached) ranlib
checking for strip... (cached) /usr/bin/strip
checking for size... (cached) /usr/bin/size
Setting FreeBSD compilation options
checking for dirent.h that defines DIR... (cached) yes
checking for opendir in -ldir... (cached) no
checking for ANSI C header files... (cached) yes
checking for errno.h... (cached) yes
checking for fcntl.h... (cached) yes
checking for getopt.h... (cached) no
checking for limits.h... (cached) yes
checking for malloc.h... (cached) no
checking for pwd.h... (cached) yes
checking for unistd.h... (cached) yes
checking for paths.h... (cached) yes
checking for inet_addr in -lxnet... (cached) no
checking for socket in -lsocket... (cached) no
checking for gethostbyname in -lnsl... (cached) no
checking for pthread_cancel in -lc_r... (cached) yes
checking for dlopen in -lc_r... (cached) yes
checking for dlopen modes... RTLD_LAZY
checking for alphasort... (cached) yes
checking for inet_addr... (cached) yes
checking for inet_aton... (cached) yes
checking for mktime... (cached) yes
checking for select... (cached) yes
checking for scandir... (cached) yes
checking for strdup... (cached) yes
checking for strerror... (cached) yes
checking for hstrerror... (cached) yes
checking for readdir_r... (cached) yes
checking whether to enable SOCKS5 support... no
checking if OpenSSL support is desired... yes
checking for openssl/ssl.h... (cached) yes
checking for DH_free in -lcrypto... (cached) yes
checking for SSL_new in -lssl... (cached) yes
checking for vector.h... (cached) yes
checking for working const... (cached) yes
checking for size_t... (cached) yes
checking for socklen_t... (cached) yes
checking whether time.h and sys/time.h may both be included... (cached) =
yes
checking whether struct tm is in sys/time.h or time.h... (cached) time.h
checking for sys_errlist and sys_nerr... (cached) yes
checking for tm_gmtoff... yes
checking for extern long timezone... yes
checking for object suffix... (cached) o
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking for executable suffix... (cached) no
checking for ld used by GCC... (cached) /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... (cached) yes
checking for /usr/libexec/elf/ld option to reload object files... =
(cached) -r
checking for BSD-compatible nm... (cached) /usr/bin/nm -B
checking whether ln -s works... (cached) yes
checking how to recognise dependant libraries... (cached) pass_all
checking for ranlib... (cached) ranlib
checking for strip... (cached) strip
updating cache ./config.cache
loading cache ./config.cache within ltconfig
(cached) checking for objdir... .libs
checking for cc option to produce PIC... -fPIC -DPIC
checking if cc PIC flag -fPIC -DPIC works... (cached) yes
checking if cc static flag -static works... (cached) yes
checking if cc supports -c -o file.o... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared =
libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsdelf4.1 ld.so
checking command to parse /usr/bin/nm -B output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking for dlfcn.h... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... =
(cached) no
creating libtool
updating cache ./config.cache
loading cache ./config.cache
loading cache ./config.cache within ltconfig
checking host system type... i386-unknown-freebsdelf4.1
checking build system type... i386-unknown-freebsdelf4.1
ltcf-cxx: with_gcc=3Dyes ; with_gnu_ld=3Dyes
checking for objdir... .libs
checking for c++ option to produce PIC... -fPIC -DPIC
checking if c++ PIC flag -fPIC -DPIC works... yes
checking if c++ static flag -static works... yes
checking if c++ supports -c -o file.o... yes
checking if c++ supports -fno-rtti -fno-exceptions ... yes
checking whether the linker (c++) supports shared libraries...=20
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsdelf4.1 ld.so
checking command to parse /usr/bin/nm -B output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking for dlfcn.h... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... =
(cached) no
appending configuration tag "CXX" to libtool
updating cache ./config.cache
creating ./config.status
creating bin/Makefile
creating share/Makefile
creating src/Makefile
creating include/Makefile
creating Makefile
creating config.h
config.h is unchanged
SOCKS5 support is disabled.
OpenSSL secure channel support is enabled.
--- Now type "gmake" to build Licq ---
--- If gmake is not working, try "make" ---
loading cache ./config.cache
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... i386-unknown-freebsdelf4.1
checking target system type... i386-unknown-freebsdelf4.1
checking build system type... i386-unknown-freebsdelf4.1
checking for a BSD compatible install... /usr/bin/install -c -o root -g =
wheel
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... found
checking for gcc... (cached) cc
checking whether the C compiler (cc -O3 -pipe -march=3Dpentiumpro ) =
works... yes
checking whether the C compiler (cc -O3 -pipe -march=3Dpentiumpro ) is a =
cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether cc accepts -g... (cached) yes
checking how to run the C preprocessor... (cached) cc -E
checking for c++... (cached) c++
checking whether the C++ compiler (c++ -O3 -pipe -march=3Dpentiumpro ) =
works... yes
checking whether the C++ compiler (c++ -O3 -pipe -march=3Dpentiumpro ) =
is a cross-compiler... no
checking whether we are using GNU C++... (cached) yes
checking whether c++ accepts -g... (cached) yes
checking whether c++ accepts -fno-rtti -fno-exceptions -fno-check-new... =
yes
checking for a BSD compatible install... /usr/bin/install -c -o root -g =
wheel
checking for ld used by GCC... (cached) /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... (cached) yes
checking for /usr/libexec/elf/ld option to reload object files... =
(cached) -r
checking for BSD-compatible nm... (cached) /usr/bin/nm -B
checking whether ln -s works... (cached) yes
checking how to recognise dependant libraries... (cached) pass_all
checking for object suffix... (cached) o
checking for executable suffix... (cached) no
checking for ranlib... (cached) ranlib
checking for strip... (cached) strip
checking how to run the C++ preprocessor... (cached) c++ -E
updating cache ./config.cache
loading cache ./config.cache within ltconfig
(cached) checking for objdir... .libs
checking for cc option to produce PIC... -fPIC -DPIC
checking if cc PIC flag -fPIC -DPIC works... (cached) yes
checking if cc static flag -static works... (cached) yes
checking if cc supports -c -o file.o... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared =
libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsdelf4.1 ld.so
checking command to parse /usr/bin/nm -B output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for dlfcn.h... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... =
(cached) no
creating libtool
updating cache ./config.cache
loading cache ./config.cache
loading cache ./config.cache within ltconfig
checking host system type... i386-unknown-freebsdelf4.1
checking build system type... i386-unknown-freebsdelf4.1
ltcf-cxx: with_gcc=3Dyes ; with_gnu_ld=3Dyes
checking for objdir... .libs
checking for c++ option to produce PIC... -fPIC -DPIC
checking if c++ PIC flag -fPIC -DPIC works... yes
checking if c++ static flag -static works... yes
checking if c++ supports -c -o file.o... yes
checking if c++ supports -fno-rtti -fno-exceptions ... yes
checking whether the linker (c++) supports shared libraries...=20
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsdelf4.1 ld.so
checking command to parse /usr/bin/nm -B output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for dlfcn.h... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... =
(cached) no
appending configuration tag "CXX" to libtool
checking for ANSI C header files... yes
checking for errno.h... yes
checking for locale.h... yes
checking whether time.h and sys/time.h may both be included... yes
checking for sys_errlist and sys_nerr... yes
checking for licq header files... =
/usr/ports/net/licq/work/licq-0.85/include
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for good X11 headers... yes
checking for inet_addr in -lxnet... no
checking for socket in -lsocket... no
checking for gethostbyname in -lnsl... no
checking for inet_addr... yes
checking for inet_aton... yes
checking for strerror... yes
checking for QT libraries...=20
configure: error:=20
I can't find the QT libraries. It is recommended to set the QTDIR =
environment
variable.
Install the QT libraries, or if you have them installed, override this =
check
with the --with-qt-libraries argument, and I'll take your word for it.
=3D=3D=3D> Script "configure" failed: here are the contents of =
"config.log"
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:553: checking for Cygwin environment
configure:586: checking for mingw32 environment
configure:662: checking host system type
configure:683: checking target system type
configure:701: checking build system type
configure:755: checking for a BSD compatible install
configure:808: checking whether build environment is sane
configure:846: checking whether make sets ${MAKE}
configure:892: checking for working aclocal
configure:905: checking for working autoconf
configure:918: checking for working automake
configure:931: checking for working autoheader
configure:944: checking for working makeinfo
configure:980: checking for gcc
configure:1093: checking whether the C compiler (cc -O3 -pipe =
-march=3Dpentiumpro ) works
configure:1109: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c 1>&5
configure:1135: checking whether the C compiler (cc -O3 -pipe =
-march=3Dpentiumpro ) is a cross-compiler
configure:1140: checking whether we are using GNU C
configure:1168: checking whether cc accepts -g
configure:1200: checking how to run the C preprocessor
configure:1284: checking for c++
configure:1316: checking whether the C++ compiler (c++ -O3 -pipe =
-march=3Dpentiumpro ) works
configure:1332: c++ -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.C 1>&5
configure:1358: checking whether the C++ compiler (c++ -O3 -pipe =
-march=3Dpentiumpro ) is a cross-compiler
configure:1363: checking whether we are using GNU C++
configure:1391: checking whether c++ accepts -g
configure:1423: checking whether c++ accepts -fno-rtti -fno-exceptions =
-fno-check-new
configure:1469: checking for a BSD compatible install
configure:1604: checking for ld used by GCC
configure:1672: checking if the linker (/usr/libexec/elf/ld) is GNU ld
configure:1689: checking for /usr/libexec/elf/ld option to reload object =
files
configure:1701: checking for BSD-compatible nm
configure:1737: checking whether ln -s works
configure:1758: checking how to recognise dependant libraries
configure:1902: checking for object suffix
configure:1928: checking for executable suffix
configure:2109: checking for ranlib
configure:2176: checking for strip
configure:2347: checking how to run the C++ preprocessor
ltconfig:670:checking for cc option to produce PIC
ltconfig:679:checking that cc PIC flag -fPIC -DPIC works.
ltconfig:741: checking if cc static flag -static works
ltconfig:787: checking if cc supports -c -o file.o
ltconfig:788: cc -c -O3 -pipe -march=3Dpentiumpro -o out/conftest2.o =
conftest.c 1>&5
ltconfig:841: checking if cc supports -fno-rtti -fno-exceptions
ltconfig:842: cc -c -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -c conftest.c conftest.c 1>&5
ltconfig:1308: checking if global_symbol_pipe works
ltconfig:1309: cc -c -O3 -pipe -march=3Dpentiumpro conftest.c 1>&5
ltconfig:1312: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ =
]\([ABCDGISTW]\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > =
conftest.nm"
ltconfig:1364: cc -o conftest -O3 -pipe -march=3Dpentiumpro -fno-builtin =
-fno-rtti -fno-exceptions conftest.c conftstm.o 1>&5
ltconfig:1705: checking for dlfcn.h
ltconfig:1744: checking whether a program can dlopen itself
ltconfig:1817: checking whether a statically linked program can dlopen =
itself
c++ -E conftest.cc
ltconfig:670:checking for c++ option to produce PIC
ltconfig:679:checking that c++ PIC flag -fPIC -DPIC works.
ltconfig:689: c++ -c -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -fPIC -DPIC -DPIC conftest.cc 1>&5
ltconfig:741: checking if c++ static flag -static works
ltconfig:750: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -static conftest.cc 1>&5
ltconfig:787: checking if c++ supports -c -o file.o
ltconfig:788: c++ -c -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -o out/conftest2.o conftest.cc 1>&5
ltconfig:841: checking if c++ supports -fno-rtti -fno-exceptions
ltconfig:842: c++ -c -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -fno-rtti -fno-exceptions -c conftest.cc =
conftest.cc 1>&5
ltconfig:1308: checking if global_symbol_pipe works
ltconfig:1309: c++ -c -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new conftest.cc 1>&5
ltconfig:1312: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ =
]\([ABCDGISTW]\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > =
conftest.nm"
ltconfig:1364: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -fno-builtin -fno-rtti -fno-exceptions =
conftest.cc conftstm.o 1>&5
ltconfig:1705: checking for dlfcn.h
ltconfig:1744: checking whether a program can dlopen itself
ltconfig:1817: checking whether a statically linked program can dlopen =
itself
configure:2499: checking for ANSI C header files
configure:2512: cc -E conftest.c >/dev/null 2>conftest.out
configure:2579: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c 1>&5
configure:2606: checking for errno.h
configure:2616: cc -E conftest.c >/dev/null 2>conftest.out
configure:2606: checking for locale.h
configure:2616: cc -E conftest.c >/dev/null 2>conftest.out
configure:2643: checking whether time.h and sys/time.h may both be =
included
configure:2657: cc -c -O3 -pipe -march=3Dpentiumpro conftest.c 1>&5
configure:2678: checking for sys_errlist and sys_nerr
configure:2692: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c 1>&5
configure:2713: checking for licq header files
configure:2782: checking for X
configure:3096: checking for dnet_ntoa in -ldnet
configure:3115: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c -ldnet 1>&5
/usr/libexec/elf/ld: cannot find -ldnet
configure: failed program was:
#line 3104 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dnet_ntoa();
int main() {
dnet_ntoa()
; return 0; }
configure:3137: checking for dnet_ntoa in -ldnet_stub
configure:3156: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c -ldnet_stub 1>&5
/usr/libexec/elf/ld: cannot find -ldnet_stub
configure: failed program was:
#line 3145 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dnet_ntoa();
int main() {
dnet_ntoa()
; return 0; }
configure:3185: checking for gethostbyname
configure:3213: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c 1>&5
configure:3283: checking for connect
configure:3311: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c 1>&5
configure:3375: checking for remove
configure:3403: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c 1>&5
configure:3467: checking for shmat
configure:3495: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
conftest.c 1>&5
configure:3568: checking for IceConnectionNumber in -lICE
configure:3587: cc -o conftest -O3 -pipe -march=3Dpentiumpro =
-L/usr/X11R6/lib conftest.c -lICE 1>&5
configure:3629: checking for good X11 headers
configure:3648: c++ -c -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -pedantic-errors -I/usr/X11R6/include =
conftest.C 1>&5
configure:3758: checking for inet_addr in -lxnet
configure:3780: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -Wall conftest.C -lxnet 1>&5
/usr/libexec/elf/ld: cannot find -lxnet
configure: failed program was:
#line 3766 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char inet_addr();
int main() {
inet_addr()
; return 0; }
configure:3808: checking for socket in -lsocket
configure:3830: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -Wall conftest.C -lsocket 1>&5
/usr/libexec/elf/ld: cannot find -lsocket
configure: failed program was:
#line 3816 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char socket();
int main() {
socket()
; return 0; }
configure:3858: checking for gethostbyname in -lnsl
configure:3880: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -Wall conftest.C -lnsl 1>&5
/usr/libexec/elf/ld: cannot find -lnsl
configure: failed program was:
#line 3866 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char gethostbyname();
int main() {
gethostbyname()
; return 0; }
configure:3910: checking for inet_addr
configure:3941: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -Wall conftest.C 1>&5
configure:3910: checking for inet_aton
configure:3941: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -Wall conftest.C 1>&5
configure:3910: checking for strerror
configure:3941: c++ -o conftest -O3 -pipe -march=3Dpentiumpro -fno-rtti =
-fno-exceptions -fno-check-new -Wall conftest.C 1>&5
configure:3978: checking for QT libraries
(end of "config.log")
*** Error code 1
Stop in /usr/ports/net/licq.
*** Error code 1
Stop in /usr/ports/net/licq.
*** Error code 1
Stop in /usr/ports/net/licq.
*** Error code 1
Stop in /usr/ports/net/licq.
*** Error code 1
Stop in /usr/ports/net/licq.
bash-2.04# exit
exit
=0A=
Script done on Sun Sep 24 21:20:50 2000=0A=
------=_NextPart_000_0004_01C02739.DFBDC930--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ELEFIKONFJLHDALNCBNDMEKFCDAA.johan.huldtgren>