Date: Thu, 24 Aug 1995 22:03:44 -0400 From: dwreski@ultrix.ramapo.edu (Dave Wreski) To: questions@freebsd.org Subject: XF86Config question.. Message-ID: <9508250203.AA09924@ultrix>
next in thread | raw e-mail | index | archive | help
Hi. I understand someone here might be able to help me with my xconfig. I have a Diamond Stealth Video 64 VRAM and an AcerView 76i, 17" monitor. X starts and runs pretty well, but the left side seems to 'fold' or 'roll' into the right side. So, if I move a window past the left side, it appears on the right side. I was hoping someone might have a similar xconfig that they could share. So far, I have: (--) S3: card type: PCI (--) S3: chipset: 968 rev. 31 (--) S3: chipset driver: mmio_928 (**) S3: videoram: 2048k (--) S3: Detected a TI ViewPoint 3026 RAMDAC rev. 11 (--) S3: Ramdac type: ti3026 (--) S3: Ramdac speed: 135 (--) S3: Using hardware cursor from Ti3026 RAMDAC (--) S3: Using TI 3026 programmable clock (MCLK 63.000 MHz) (--) S3: Maximum allowed dot-clock: 135.000 MHz (**) S3: Mode "1024x768": mode clock = 85.000 (**) S3: Mode "800x600": mode clock = 50.000 (**) S3: Mode "640x480": mode clock = 31.500 (--) S3: Operating RAMDAC in pixel multiplex mode (**) S3: Using 16 bpp. Color weight: 565 (**) S3: Virtual resolution set to 1024x768 Should I be using the mmio_928, or s3_generic chipset driver? They both seem to look the same, and seeing how there is no 968 driver... Thanks for any ideas, Dave Wreski dwreski@ultrix.ramapo.edu ps, if this is a mailing list, please advise how to join, and please forward any replies to me, as I have not joined yet :)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9508250203.AA09924>