Date: Sat, 27 Mar 2004 16:07:55 -0800 From: Julian Elischer <julian@elischer.org> To: freebsd-stable@freebsd.org Subject: Re: USB2 device Message-ID: <4066175B.4070309@elischer.org> In-Reply-To: <1080431997.802.6.camel@fast.mmercer.com> References: <20040327200052.7107616A4F6@hub.freebsd.org> <40661362.1010605@elischer.org> <406613F8.4090700@elischer.org> <1080431997.802.6.camel@fast.mmercer.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Michael E. Mercer wrote: > Julian, > > I am running 4.9-Stable. I do not see EHCI in the LINT file and config > on a kernel config file says unknown ehci device. what tag are you checking your code out on? > > Any ideas? > > Thanks > Michael E Mercer > > > On Sat, 2004-03-27 at 18:53, Julian Elischer wrote: > >>Julian Elischer wrote: >> >>> I have the same Lexar Jumpdrive and it seems to work for me on an Asus >>>P4PE >>>with intel EHCI driver, as long as I plug it in AFTER booting. >>> >>>however: >>>It hangs if I have the drive in during boot. >>>It doesn't seem to give me the speed I get on another system >>> >>>BTW the speeds are: >>> >>>low speed (1.5Mb/Sec) >>> >>>full speed (12Mb/sec) >>> >>>high speed (480Mb/sec) >>> >>> >>>I'm working on the USB code at the moment so I'm hoping to gete it fixed. >> >>I forgot to say that you need to configure the EHCI driver into our kernel >>or you can not get USB2. >>I notice it is not in your kernel dmesg.. >> >> >>>-- original message: >>> >>>Hello, >>> >>> >>>>I have an ASUS P4C-800-E Deluxe Motherboard, P4 3.0GHz processor with >>>>builtin >>>>USB 2.0 controllers. >>>> >>>>I am having a problem with the Lexar Media JumpDrive 2.0 Pro 256M >>>>memory keystick. >>>> >>>>usbd nevers sees it. I finally went into BIOS and set the Speed for >>>>the USB >>>>2.0 Controller to FullSpeed (maybe HighSpeed, in whatever case its >>>>12MBps as >>>>opposed to 240MBps). When setting it to 12MBps, usbd sees the drive and >>>>attaches it. Setting the speed to higher, usbd does NOT attach it. >>>> >>> >>>I don't know how the Bios is connecte with this... >>> >>> >>>>Also NOTE: I have a SIIG SlimHub 2.0 4 ports, that I can not attach my >>>>JumpDrive too. I must set the speed to 12MBps and attach it directly to a >>>>port on my PC to get it to see it. >>>> >>>>Any help in this would be appreciated. >>>> >>>>Thanks! Michael E. Mercer >>>> >>>>My system is the latest 4.9-Stable build as of yesterday. >>> >>> >>>I committed some relevant stuff yesterday. make sure you have that.. >>> >> > > -- +------------------------------------+ ______ _ __ | __--_|\ Julian Elischer | \ U \/ / hard at work in | / \ julian@elischer.org +------>x USA \ a very strange | ( OZ ) \___ ___ | country ! +- X_.---._/ presently in San Francisco \_/ \\ v
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4066175B.4070309>