Date: Thu, 6 Nov 2003 19:54:21 -0600 From: "Cagle, John (ISS-Houston)" <john.cagle@hp.com> To: "John Baldwin" <jhb@FreeBSD.org> Cc: smp@FreeBSD.org Subject: Dmesg on 4-way w/HTT (8 procs total) Message-ID: <C50AB9511EE59B49B2A503CB7AE1ABD106610E82@cceexc19.americas.cpqcorp.net>
next in thread | raw e-mail | index | archive | help
> > -----Original Message----- > > From: John Baldwin > > > > My GENERIC build finished ok, so it should at least be workable for > > most people. By the way, if anyone has a machine with 8 or=20 > more CPUs > > (John Cagle, I know you are out there. :)) feel free to test the new > > code out and post a boot -v dmesg log to the smp@ list. Thanks. >=20 > Hi John! >=20 > Yes, I'm out here! ;-) >=20 > Attached below is a dmesg from the ProLiant DL560 which has 4 XEON-HTT > processors. I'll try the 8-way next. This PAE kernel is from a cvsup > early this morning. >=20 > Thanks, > John Cagle Sorry, that wasn't too useful. I put "-v" in /boot.config but that was Pointless. I've attached a *REAL* boot dmesg with -v below. Notice that I've got a Dual-Port NIC in a PCI slot (fxp0&1), and the ports have IRQ's 26 & 27 now! Woo Hoo! Previously that didn't work. However, it looks like there may be some timer problems in the ACPI code since it's complaining that some ACPI timers look bad. Thanks, John Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Thu Nov 6 17:36:05 GMT 2003 root@bigdaddy:/usr/obj/usr/src/sys/PAE Preloaded elf kernel "/boot/kernel/kernel" at 0xc06fd000. ACPI APIC Table: <COMPAQ 00000083> Calibrating clock(s) ... i8254 clock: 1193349 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1888690784 Hz CPU: Intel(R) XEON(TM) MP CPU 1.90GHz (1888.69-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf22 Stepping =3D 2 =20 Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> Hyperthreading: 2 logical CPUs real memory =3D 9126801408 (8703 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x0000000000887000 - 0x00000000efff9fff, 4017565696 bytes (980851 pages) 0x0000000100000000 - 0x0000000215e58fff, 4662333440 bytes (1138265 pages) avail memory =3D 8611352576 (8212 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 APIC ID: physical 2, logical 0:2 APIC ID: physical 3, logical 0:3 APIC ID: physical 4, logical 1:0 APIC ID: physical 5, logical 1:1 APIC ID: physical 6, logical 1:2 APIC ID: physical 7, logical 1:3 FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry =3D 0xf0000 (c00f0000) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0x94 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 APIC: CPU 2 has ACPI ID 2 APIC: CPU 3 has ACPI ID 3 APIC: CPU 4 has ACPI ID 4 APIC: CPU 5 has ACPI ID 5 APIC: CPU 6 has ACPI ID 6 APIC: CPU 7 has ACPI ID 7 MADT: Found IO APIC ID 2, Vector 0 at 0xfec00000 ioapic0: intpin 0 -> ExtINT ioapic0: intpin 1 -> irq 1 ioapic0: intpin 2 -> irq 2 ioapic0: intpin 3 -> irq 3 ioapic0: intpin 4 -> irq 4 ioapic0: intpin 5 -> irq 5 ioapic0: intpin 6 -> irq 6 ioapic0: intpin 7 -> irq 7 ioapic0: intpin 8 -> irq 8 ioapic0: intpin 9 -> irq 9 ioapic0: intpin 10 -> irq 10 ioapic0: intpin 11 -> irq 11 ioapic0: intpin 12 -> irq 12 ioapic0: intpin 13 -> irq 13 ioapic0: intpin 14 -> irq 14 ioapic0: intpin 15 -> irq 15 MADT: Found IO APIC ID 3, Vector 16 at 0xfec01000 ioapic1: intpin 0 -> irq 16 ioapic1: intpin 1 -> irq 17 ioapic1: intpin 2 -> irq 18 ioapic1: intpin 3 -> irq 19 ioapic1: intpin 4 -> irq 20 ioapic1: intpin 5 -> irq 21 ioapic1: intpin 6 -> irq 22 ioapic1: intpin 7 -> irq 23 ioapic1: intpin 8 -> irq 24 ioapic1: intpin 9 -> irq 25 ioapic1: intpin 10 -> irq 26 ioapic1: intpin 11 -> irq 27 ioapic1: intpin 12 -> irq 28 ioapic1: intpin 13 -> irq 29 ioapic1: intpin 14 -> irq 30 ioapic1: intpin 15 -> irq 31 MADT: Found IO APIC ID 4, Vector 32 at 0xfec02000 ioapic2: intpin 0 -> irq 32 ioapic2: intpin 1 -> irq 33 ioapic2: intpin 2 -> irq 34 ioapic2: intpin 3 -> irq 35 ioapic2: intpin 4 -> irq 36 ioapic2: intpin 5 -> irq 37 ioapic2: intpin 6 -> irq 38 ioapic2: intpin 7 -> irq 39 ioapic2: intpin 8 -> irq 40 ioapic2: intpin 9 -> irq 41 ioapic2: intpin 10 -> irq 42 ioapic2: intpin 11 -> irq 43 ioapic2: intpin 12 -> irq 44 ioapic2: intpin 13 -> irq 45 ioapic2: intpin 14 -> irq 46 ioapic2: intpin 15 -> irq 47 MADT: Found IO APIC ID 5, Vector 48 at 0xfec03000 ioapic3: intpin 0 -> irq 48 ioapic3: intpin 1 -> irq 49 ioapic3: intpin 2 -> irq 50 ioapic3: intpin 3 -> irq 51 ioapic3: intpin 4 -> irq 52 ioapic3: intpin 5 -> irq 53 ioapic3: intpin 6 -> irq 54 ioapic3: intpin 7 -> irq 55 ioapic3: intpin 8 -> irq 56 ioapic3: intpin 9 -> irq 57 ioapic3: intpin 10 -> irq 58 ioapic3: intpin 11 -> irq 59 ioapic3: intpin 12 -> irq 60 ioapic3: intpin 13 -> irq 61 ioapic3: intpin 14 -> irq 62 ioapic3: intpin 15 -> irq 63 MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi lapic: Routing NMI -> LINT1 ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard ioapic3 <Version 1.1> irqs 48-63 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled acpi0: <COMPAQ P30 > on motherboard ACPI-1016: *** Info: There are no GPE blocks defined in the FADT acpi0: Power Button (fixed) ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 ACPI timer looks BAD min =3D 4, max =3D 8, width =3D 4 ACPI timer looks BAD min =3D 4, max =3D 8, width =3D 4 ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 ACPI timer looks BAD min =3D 4, max =3D 7, width =3D 3 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there = (id=3D00121166) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 acpi_cpu4: <CPU> on acpi0 acpi_cpu5: <CPU> on acpi0 acpi_cpu6: <CPU> on acpi0 acpi_cpu7: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 ---- initial configuration ------------------------ \\_SB_.IUSB irq 7: [ 4 5 7 10 11 15] 0.15.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.IUSB irq 7: [ 4 5 7 10 11 15] 0.15.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 found-> vendor=3D0x1166, dev=3D0x0012, revid=3D0x13 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1166, dev=3D0x0012, revid=3D0x00 bus=3D0, slot=3D0, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1166, dev=3D0x0000, revid=3D0x00 bus=3D0, slot=3D0, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 1, range 32, base f6000000, size 24, enabled map[14]: type 4, range 32, base 00002400, size 8, enabled map[18]: type 1, range 32, base f5ff0000, size 12, enabled found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27 bus=3D0, slot=3D3, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00001800, size 8, enabled map[14]: type 1, range 32, base f5fe0000, size 9, enabled pcib0: matched entry for 0.4.INTA (source ) pcib0: device is hardwired to IRQ 16 found-> vendor=3D0x0e11, dev=3D0xb203, revid=3D0x01 bus=3D0, slot=3D4, func=3D0 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0103, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D16 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002800, size 8, enabled map[14]: type 1, range 32, base f5fd0000, size 11, enabled map[18]: type 1, range 32, base f5fc0000, size 13, enabled map[1c]: type 1, range 32, base f5f00000, size 19, enabled pcib0: matched entry for 0.4.INTB (source ) pcib0: device is hardwired to IRQ 17 found-> vendor=3D0x0e11, dev=3D0xb204, revid=3D0x01 bus=3D0, slot=3D4, func=3D2 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0197, statreg=3D0x0290, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D17 powerspec 2 supports D0 D3 current D0 found-> vendor=3D0x1166, dev=3D0x0201, revid=3D0x93 bus=3D0, slot=3D15, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0147, statreg=3D0x2200, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00002000, size 4, enabled found-> vendor=3D0x1166, dev=3D0x0212, revid=3D0x93 bus=3D0, slot=3D15, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0145, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 1, range 32, base f5ef0000, size 12, enabled pcib0: matched entry for 0.15.INTA (source \\_SB_.IUSB) pcib0: _CRS resource entry has unsupported type 14 found-> vendor=3D0x1166, dev=3D0x0220, revid=3D0x05 bus=3D0, slot=3D15, func=3D2 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0157, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns) intpin=3Da, irq=3D7 found-> vendor=3D0x1166, dev=3D0x0225, revid=3D0x00 bus=3D0, slot=3D15, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0004, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1166, dev=3D0x0101, revid=3D0x05 bus=3D0, slot=3D16, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0142, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1166, dev=3D0x0101, revid=3D0x05 bus=3D0, slot=3D16, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0142, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1166, dev=3D0x0101, revid=3D0x05 bus=3D0, slot=3D17, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0142, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1166, dev=3D0x0101, revid=3D0x05 bus=3D0, slot=3D17, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0142, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) pci0: <display, VGA> at device 3.0 (no driver attached) pci0: <base peripheral> at device 4.0 (no driver attached) pci0: <base peripheral> at device 4.2 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01 ata0-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0-slave: stat=3D0x00 err=3D0x24 lsb=3D0xff msb=3D0x00 ata0: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 = devices=3D0x4<ATAPI_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: simplex device, DMA on primary only ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 15.2 (no driver attached) pcib1: <ACPI Host-PCI bridge> on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=3D1 map[10]: type 1, range 64, base f7bc0000, size 18, enabled map[18]: type 4, range 32, base 00003000, size 8, enabled map[1c]: type 3, range 64, base f7af0000, size 14, enabled pcib1: matched entry for 1.3.INTA (source ) pcib1: device is hardwired to IRQ 30 found-> vendor=3D0x0e11, dev=3D0xb178, revid=3D0x01 bus=3D1, slot=3D3, func=3D0 class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0157, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x47 (2130 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D30 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf7af0000-0xf7af3fff,0xf7bc0000-0xf7bfffff irq 30 at device 3.0 on pci1 ciss0: using 256 of 1024 available commands ciss0: 1 logical drive configured ciss0: firmware 1.92 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe<simple,performant,MEMQ> ciss0: active I/O method 0x3<simple> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x2<ultra3> ciss0: server name '' ciss0: heartbeat 0x1000004b ciss0: 1 logical drive ciss0: logical drive 0: RAID 1, 16896MB online pcib2: <ACPI Host-PCI bridge> on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=3D2 map[10]: type 1, range 64, base f7cf0000, size 16, enabled pcib2: matched entry for 2.1.INTA (source ) pcib2: device is hardwired to IRQ 31 found-> vendor=3D0x14e4, dev=3D0x16a7, revid=3D0x02 bus=3D2, slot=3D1, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D31 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base f7ce0000, size 16, enabled pcib2: matched entry for 2.2.INTA (source ) pcib2: device is hardwired to IRQ 23 found-> vendor=3D0x14e4, dev=3D0x16a7, revid=3D0x02 bus=3D2, slot=3D2, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D23 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7cf0000-0xf7cfffff irq 31 at device 1.0 on pci2 bge0: Ethernet address: 00:0b:cd:29:69:35 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ce0000-0xf7ceffff irq 23 at device 2.0 on pci2 bge1: Ethernet address: 00:0b:cd:29:69:36 miibus1: <MII bus> on bge1 brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: bpf attached pcib3: <ACPI Host-PCI bridge> on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3D3 pcib4: <ACPI Host-PCI bridge> on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci6: <ACPI PCI bus> on pcib4 pci6: physical bus=3D6 found-> vendor=3D0x1011, dev=3D0x0026, revid=3D0x02 bus=3D6, slot=3D2, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0147, statreg=3D0x0290, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns) pcib5: <PCI-PCI bridge> at device 2.0 on pci6 pcib5: secondary bus 7 pcib5: subordinate bus 7 pcib5: I/O decode 0x4000-0x4fff pcib5: memory decode 0xf7e00000-0xf7ffffff pcib5: prefetched decode 0xf7d00000-0xf7dfffff pci7: <PCI bus> on pcib5 pci7: physical bus=3D7 map[10]: type 3, range 32, base f7df0000, size 12, enabled map[14]: type 4, range 32, base 00004000, size 5, enabled map[18]: type 1, range 32, base f7f00000, size 20, enabled pcib4: matched entry for 6.2.INTA (source ) pcib4: device is hardwired to IRQ 26 pcib5: slot 4 INTA is routed to irq 26 found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x05 bus=3D7, slot=3D4, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0157, statreg=3D0x0280, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 ns) intpin=3Da, irq=3D26 map[10]: type 3, range 32, base f7de0000, size 12, enabled map[14]: type 4, range 32, base 00004020, size 5, enabled map[18]: type 1, range 32, base f7e00000, size 20, enabled pcib4: matched entry for 6.2.INTB (source ) pcib4: device is hardwired to IRQ 27 pcib5: slot 5 INTA is routed to irq 27 found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x05 bus=3D7, slot=3D5, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0157, statreg=3D0x0280, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 ns) intpin=3Da, irq=3D27 fxp0: <Intel 82558 Pro/100 Ethernet> port 0x4000-0x401f mem 0xf7f00000-0xf7ffffff,0xf7df0000-0xf7df0fff irq 26 at device 4.0 on pci7 pcib5: device fxp0 requested decoded memory range 0xf7df0000-0xf7df0fff fxp0: using memory space register mapping fxp0: Ethernet address 00:08:c7:91:14:c2 fxp0: PCI IDs: 8086 1229 0e11 b0dd 0005 fxp0: Dynamic Standby mode is disabled miibus2: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus2 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp1: <Intel 82558 Pro/100 Ethernet> port 0x4020-0x403f mem 0xf7e00000-0xf7efffff,0xf7de0000-0xf7de0fff irq 27 at device 5.0 on pci7 pcib5: device fxp1 requested decoded memory range 0xf7de0000-0xf7de0fff fxp1: using memory space register mapping fxp1: Ethernet address 00:08:c7:91:14:c3 fxp1: PCI IDs: 8086 1229 0e11 b0dd 0005 fxp1: Dynamic Standby mode is disabled miibus3: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus3 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 isa_dmainit(2, 1024) failed fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1888690784 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached ata0-master: pio=3D0x0c wdma=3D0xffffffff udma=3D0xffffffff = cable=3D40pin acd0: setting PIO4 on ServerWorks CSB5 chip acd0: <COMPAQ CD-ROM SN-124/N104> CDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error pass0 at ciss0 bus 0 target 0 lun 0 pass0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device=20 pass0: 135.168MB/s transfers GEOM: create disk da0 dp=3D0xd2d8e450 GEOM: new disk da0 da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device=20 da0: 135.168MB/s transfers da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C) SMP: AP CPU #7 Launched! cpu7 AP: ID: 0x07000000 VER: 0x00050014 LDR: 0x18000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #4 Launched! cpu4 AP: ID: 0x04000000 VER: 0x00050014 LDR: 0x11000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #6 Launched! cpu6 AP: ID: 0x06000000 VER: 0x00050014 LDR: 0x14000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #5 Launched! cpu5 AP: ID: 0x05000000 VER: 0x00050014 LDR: 0x12000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (IRQ 1) to cluster 0 ioapic0: routing intpin 4 (IRQ 4) to cluster 1 ioapic0: routing intpin 6 (IRQ 6) to cluster 0 ioapic0: routing intpin 8 (IRQ 8) to cluster 0 ioapic0: routing intpin 9 (IRQ 9) to cluster 0 ioapic0: routing intpin 13 (IRQ 13) to cluster 1 ioapic0: routing intpin 14 (IRQ 14) to cluster 1 ioapic0: routing intpin 15 (IRQ 15) to cluster 0 ioapic1: routing intpin 7 (IRQ 23) to cluster 1 ioapic1: routing intpin 10 (IRQ 26) to cluster 0 ioapic1: routing intpin 11 (IRQ 27) to cluster 1 ioapic1: routing intpin 14 (IRQ 30) to cluster 1 ioapic1: routing intpin 15 (IRQ 31) to cluster 0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/32 s:32 l:35553088 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 16384 length 18203181056 end 18203197439 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 GEOM: Configure da0s1a, start 0 length 268435456 end 268435455 GEOM: Configure da0s1b, start 268435456 length 8589934592 end 8858370047 GEOM: Configure da0s1c, start 0 length 18203181056 end 18203181055 GEOM: Configure da0s1d, start 8858370048 length 268435456 end 9126805503 GEOM: Configure da0s1e, start 9126805504 length 268435456 end 9395240959 GEOM: Configure da0s1f, start 9395240960 length 8807940096 end 18203181055 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 ciss0: command status 0x1 (target status) scsi status 0x2 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init bge0: gigabit link up
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C50AB9511EE59B49B2A503CB7AE1ABD106610E82>