Date: Sun, 7 Jun 2020 20:38:31 +0300 From: Yuri Pankov <yuripv@yuripv.dev> To: Miguel C <miguelmclara@gmail.com>, FreeBSD Mailing List <freebsd-questions@freebsd.org> Subject: Re: No SD Card support on FreeBSD 12.1 - intel NUC (NUC7i5BN) Message-ID: <41d3d94d-2da1-9c6f-38a8-d0af1cc2fc50@yuripv.dev> In-Reply-To: <CADGo8CVsaTvjfYrc%2BCdFggx8oqaGRAnE7yvLt3CjU=32=MVsjQ@mail.gmail.com> References: <CADGo8CVsaTvjfYrc%2BCdFggx8oqaGRAnE7yvLt3CjU=32=MVsjQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Miguel C wrote: > From what I see in https://wiki.freebsd.org/IntelNUC this seems to at list > show in pciconf for NUC&: > > pciconf output shows: > sdhci_pci0: <Generic SD HCI> mem > 0xdc101000-0xdc101fff,0xdc100000-0xdc1007ff irq 17 at device 0.0 on pci1 > > > > However I don't see anything like such on mine (AFAIK the setup is similar > and there's a microSD port on the side but I'm not sure how things are > hardwired ofc) > > I also don't see anything in usbconfig > > > I have mmcsd and sdhci loaded (by default): > > kldstat -v | egrep "sdh|mmc" > 247 sdhci_pci/mmc > 246 pci/sdhci_pci > 245 sdhci_acpi/mmc > 244 acpi/sdhci_acpi > 187 mmc/mmcsd > > > And this is the full output of pciconf -lv > hostb0@pci0:0:0:0: class=0x060000 card=0x20688086 chip=0x59048086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM > Registers' > class = bridge > subclass = HOST-PCI > vgapci0@pci0:0:2:0: class=0x030000 card=0x20688086 chip=0x59268086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Iris Plus Graphics 640' > class = display > subclass = VGA > none0@pci0:0:8:0: class=0x088000 card=0x20688086 chip=0x19118086 rev=0x00 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core > Processor Gaussian Mixture Model' > class = base peripheral > xhci0@pci0:0:20:0: class=0x0c0330 card=0x20688086 chip=0x9d2f8086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP USB 3.0 xHCI Controller' > class = serial bus > subclass = USB > none1@pci0:0:20:2: class=0x118000 card=0x20688086 chip=0x9d318086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP Thermal subsystem' > class = dasp > none2@pci0:0:22:0: class=0x078000 card=0x20688086 chip=0x9d3a8086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP CSME HECI' > class = simple comms > ahci0@pci0:0:23:0: class=0x010601 card=0x20688086 chip=0x9d038086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP SATA Controller [AHCI mode]' > class = mass storage > subclass = SATA > pcib1@pci0:0:28:0: class=0x060400 card=0x20688086 chip=0x9d108086 rev=0xf1 > hdr=0x01 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP PCI Express Root Port' > class = bridge > subclass = PCI-PCI > pcib2@pci0:0:28:7: class=0x060400 card=0x20688086 chip=0x9d178086 rev=0xf1 > hdr=0x01 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP PCI Express Root Port' > class = bridge > subclass = PCI-PCI > isab0@pci0:0:31:0: class=0x060100 card=0x20688086 chip=0x9d4e8086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Intel(R) 100 Series Chipset Family LPC Controller/eSPI > Controller - 9D4E' > class = bridge > subclass = PCI-ISA > none3@pci0:0:31:2: class=0x058000 card=0x20688086 chip=0x9d218086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP PMC' > class = memory > hdac0@pci0:0:31:3: class=0x040380 card=0x20688086 chip=0x9d718086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP HD Audio' > class = multimedia > subclass = HDA > none4@pci0:0:31:4: class=0x0c0500 card=0x20688086 chip=0x9d238086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Sunrise Point-LP SMBus' > class = serial bus > subclass = SMBus > em0@pci0:0:31:6: class=0x020000 card=0x20688086 chip=0x15d88086 rev=0x21 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Ethernet Connection (4) I219-V' > class = network > subclass = ethernet > none5@pci0:58:0:0: class=0xff0000 card=0x20688086 chip=0x522910ec rev=0x01 > hdr=0x00 > vendor = 'Realtek Semiconductor Co., Ltd.' > device = 'RTS5229 PCI Express Card Reader' > > > Is there anything else I can try? (any other module I should be loading) I think there's some ongoing work in the following PR for (what seems to be) your card reader: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=204521
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41d3d94d-2da1-9c6f-38a8-d0af1cc2fc50>