Date: Tue, 19 Aug 1997 10:59:09 -0600 From: "Justin T. Gibbs" <gibbs@plutotech.com> To: Raul Zighelboim <mango@staff.communique.net> Cc: "'scsi@freebsd.org'" <scsi@FreeBSD.ORG> Subject: Re: ahc drivers configuration question... Message-ID: <199708191659.KAA24398@pluto.plutotech.com> In-Reply-To: Your message of "Tue, 19 Aug 1997 10:56:37 CDT." <A03CD00C69B1D01195AB00A024ECEB162AB825@kaori.communique.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> >I have a system with 5 internal drives, and I am about to move 3 drives >from a different machine into this one. I am trying to minimise >downtime. What kind of controller do you have? The "bus" keywords in your configuration only make sense for the 2742(A)T controllers. If you are using a 39XX controller, the extra channels show up as separate SCSI controllers since that is exactly how they are implemented on the card. >So, my questions are: > Is the confiration as I have it correct ? (sd1, sd2 and sd3 >will be added at the last minute). Apart from possibly the scbus declarations, it looks to be correct. > Is it possible to do 'disk sd1 at scbus1 target 0' when I have >'disk sd0 at scbus0 target 0' on the same controller ? Sure. > Is there something I must change on the controller to allow this >(ie, force termination) ? I don't understand this question. > Thanks -- Justin T. Gibbs =========================================== FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199708191659.KAA24398>