Date: Wed, 1 Oct 1997 02:35:00 -0400 (EDT) From: User Gp <gp@tower.my.domain> To: questions@FreeBSD.ORG Cc: hardware@FreeBSD.ORG Subject: ppbus problem Message-ID: <199710010635.CAA00340@tower.my.domain>
next in thread | raw e-mail | index | archive | help
Mime Version: 1.0
Content Type: Text Plain
Date: Wed, 01 Oct 1997 02:35:00 -0400
From: User Gp <gp@tower.my.domain>
I 'm trying to install the ppbus stuff for my parallel port
zip drive. The kernel compiled OK, and it has a lot to say
about the drive, but fdisk and mount produce no results.
Here's dmesg. Any ideas.
Thanks.
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Wed Oct 1 01:55:48 EDT 1997
gp@tower.my.domain:/usr/src/sys/compile/GPKERNEL
CPU: Cyrix 6x86 (486-class CPU)
Origin = "CyrixInstead" Device ID = 0x2231 Stepping=2 Revision=2
real memory = 50331648 (49152K bytes)
avail memory = 46845952 (45748K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
lpt1 at 0x378-0x37f irq 12 on isa
lpt1: Interrupt-driven port
lp1: TCP/IP capable interface
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3 not found at 0x2e8
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 82100A4>, 32-bit, multi-block-16
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CD-916E/ATK/11A>, removable, intr, dma, iordy
wcd0: 2062Kb/sec, 120Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 flags 0x7 on motherboard
npx0: INT 16 interface
ppc0 at 0x278 irq 7 on isa
ppc0: Generic chipset in PS/2 mode
plip0: <PLIP network interface> on ppbus 0
ppi0: <generic parallel i/o> on ppbus 0
vpo0: <Adaptec aic7110 scsi> on ppbus 0
scbus0 at vpo0 bus 0
sd0 at scbus0 target 6 lun 0
sd0: <IOMEGA ZIP 100 D.13> type 0 removable SCSI 2
sd0: Direct-Access
sd0: UNIT ATTENTION asc:28,0
sd0: Not ready to ready transition, medium may have changed
862MB (196608 4592 byte sectors)
vpo0: <Adaptec aic7110 scsi> on ppbus 0
scbus1 at vpo0 bus 0
sd1 at scbus1 target 6 lun 0
sd1: <IOMEGA ZIP 100 D.13> type 0 removable SCSI 2
sd1: Direct-Access
sd1: ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd1 could not mode sense (4). Using ficticious geometry
96MB (196608 512 byte sectors)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199710010635.CAA00340>