Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Apr 1998 11:57:53 -0600 (MDT)
From:      Marc Slemko <marcs@znep.com>
To:        Open Systems Networking <opsys@mail.webspan.net>
Cc:        freebsd-advocacy@FreeBSD.ORG, freebsd-hardware@FreeBSD.ORG
Subject:   Re: *** Real Action Item: SPECweb
Message-ID:  <Pine.BSF.3.95.980424114047.13481u-100000@alive.znep.com>
In-Reply-To: <Pine.BSF.3.95.980424120647.1350A-100000@orion.webspan.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 24 Apr 1998, Open Systems Networking wrote:

> On Fri, 24 Apr 1998, Don Wilde wrote:
> 
> > With that in mind, I'd like to solicit comments on what the best hardware
> > (single CPU) we can get to give us the highest TCPIP network throughput. If
> > you'll look at http://www.SPECbench.org, you'll see the disclosures for the
> > systems Novell and others have used to achieve their performance. The key to
> > this thing is maximum bandwidth, disk performance, and maximum intelligence on
> > the IO channels. Even if we do it by using a gigabit card set and fiber, we're
> > after exposure for FreeBSD and Apache, not necessarily long-lasting benchmark
> > numbers.

Whatever you do, your results had better be limited by something other
than the network.  The drivers are important, the card design is
important, etc. but whatever you do the point of the benchmark is to not
be network limited.

> 
> I have no doubt in my mind that the intel card david is using in WCARCHIVE
> is THE card to pump out data in insane quantities. I used to love the DEC
> based cards and still do, and the new tx0 SMC driver is nice to, but I
> think the Intel Pro/100B witht he fxp driver is THE card to use. get a MB
> with 4 PCI slots and slam 4 of those bad boys in there. I dont know if
> there are multiport versions of them but even if not these cards spit
> fire. Thats for PCI if you want anything else im not sure. I dont know
> about the ATM driver never used it. We should see what david says. I think
> even just 4 single port 100B's could outdo by a nice margin whatever
> novell used. IMO anyway. David? Generally TYAN MB's I think are the best.
> But it all depends on the CPU/Chipset combo.
> So i'm going to go look at the spechweb benchmark place before hunting
> down good combo's.

For web benchmarks jacking up the MTU beyond what you can get with
Ethernet can give significant wins.  FDDI can help a bit, ATM can help
even more.  Can't comment on driver support in FreeBSD, and using
a NIC with a bad driver or design can hurt things a lot.

See ftp://ftp.cup.hp.com/dist/networking/briefs/WebMTU.pdf for some
example numbers on the impact this can have.  This is the sort of thing
you are dealing with when competing against SPECweb96 numbers.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-advocacy" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95.980424114047.13481u-100000>