Date: Sat, 31 Jan 1998 13:44:14 -0800 From: Matthew Jacob <mjacob@feral.com> To: Steve Passe <smp@csn.net> Cc: Kevin Van Maren <vanmaren@fast.cs.utah.edu>, freebsd-smp@FreeBSD.ORG, jc@irbs.com Subject: Re: SMP results with a P6DLF and 686DLX Message-ID: <34D39B2E.70F0BF24@feral.com> References: <199801311955.MAA12600@Ilsa.StevesCafe.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------5FAFA8BF6E730BCE781C3863
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
FYI- SuperMicro P6NDH- I *hate* AMI bios, but this particular board
has 8 PCI slots plus I2O/i960, which, with 16MB ram for the I2O,
essentially gives you zero latency PCI<>MEM writes... w/o OS
knowledge.
It *is* a pretty broken BIOS tho...
-matt
--------------5FAFA8BF6E730BCE781C3863
Content-Type: text/plain; charset=us-ascii; name="Z"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="Z"
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Mon Jan 26 22:14:48 GMT 1998
mjacob@quarm.feral.com:/usr/home/mjacob/projects/freebsd/cam/projects/freebsd/cam/usr/src/sys/compile/SMP-GENERIC
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 134217728 (131072K bytes)
avail memory = 127397888 (124412K bytes)
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vx0: <3COM 3C590 Etherlink III PCI> rev 0x00 int a irq 16 on pci0.16.0
utp/aui/bnc[*utp*] address 00:a0:24:56:55:cc
Warning! Defective early revision adapter!
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 17 on pci0.18.0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs
vga0: <S3 Trio graphics accelerator> rev 0x00 int a irq 18 on pci0.19.0
chip2: <PCI to PCI bridge (vendor=8086 device=0960)> rev 0x01 on pci0.20.0
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 not found at 0x300
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found
mse0 not found at 0x23c
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM2110A>
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ie1: unknown board_id: f000
ie1 not found at 0x360
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze: slot 0: no card in slot
ze: slot 1: no card in slot
ze0 not found at 0x300
zp: slot 0: no card in slot
zp: slot 1: no card in slot
zp0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: routing 8254 via 8259 on pin 0
SMP: AP CPU #1 Launched!
--------------5FAFA8BF6E730BCE781C3863--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?34D39B2E.70F0BF24>