Date: Tue, 1 Dec 2009 17:07:18 +0000 From: Anton Shterenlikht <mexas@bristol.ac.uk> To: Anton Shterenlikht <mexas@bristol.ac.uk> Cc: freebsd-sparc64@freebsd.org, freebsd-questions@freebsd.org Subject: Re: trouble installing to sun blade 1500 Message-ID: <20091201170718.GB12178@mech-cluster241.men.bris.ac.uk> In-Reply-To: <20091201165752.GA12095@mech-cluster241.men.bris.ac.uk> References: <20091201154904.GA11679@mech-cluster241.men.bris.ac.uk> <alpine.LNX.2.00.0912011723060.21559@servww6.ww.uni-erlangen.de> <20091201165752.GA12095@mech-cluster241.men.bris.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Dec 01, 2009 at 04:57:52PM +0000, Anton Shterenlikht wrote: > On Tue, Dec 01, 2009 at 05:27:11PM +0100, Gheorghe Ardelean wrote: > > > > > > Hello Anton ... to FreeBSD sparc64, > > > > > I get to OK prompt, type "boot cdrom", but the process > > > stops after a few seconds with: > > > > > > jumping to kernel entry at 0xc0088000. > > > > > > > I think supported system means that it is working at least via serial > > console (this is the case e.g for Plain Ultra 1). > > > > So when I see something like this I hook-up a serial console and try over > > it. > > ok, 8.0 installation went fine. > > On reboot I get this panic (typed by hand): > > Entropy harvesting: interrupts ethernet point_to_pointpanic: trap: memory > address not aligned > > Automatic reboot in 15 seconds > > Any advice? in case it matters, I see nexus0: <syscons> type unknown (no driver attached) nexus0: <memory-controller> mem 0x40000000000-0x4000000007 type memory-controller (no driver attached) messages on boot. Not sure if it's related. many thanks for any advice -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091201170718.GB12178>