Date: Mon, 5 May 2014 01:47:31 -0700 From: Adrian Chadd <adrian@freebsd.org> To: upyzl <zj262144@gmail.com> Cc: FreeBSD Net <freebsd-net@freebsd.org> Subject: Re: netmap: how to bridge 2 eth? Message-ID: <CAJ-Vmonnv-L_bnqWYWXP0pD87F4MymGOzVO_AkzQ=1zM7zEuMQ@mail.gmail.com> In-Reply-To: <CAMijcFHrQiyARjcB1NMSBPNpCyZ7K9NK=Xomk1ZL3zEBFaNVJQ@mail.gmail.com> References: <CAMijcFHrQiyARjcB1NMSBPNpCyZ7K9NK=Xomk1ZL3zEBFaNVJQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I think you're asking the wrong group for help. This is for FreeBSD support, not Netmap-on-Linux support. Good luck though! -a On 2 May 2014 23:44, upyzl <zj262144@gmail.com> wrote: > Hi all > > I'm doing to implement a simple openflow-based software switch(not same as > OVS, much simpler to OVS) > and I choose netmap for the network framework > > Now I try to do a simplest thing: > > there's 3 VMs, all are Ubuntu 12.04.4 x64 > 2 act as hosts, other 1 act as switch > > topo: [host1] eth0 ----- eth0 [switch] eth1 ----- eth0 [host2] > > I want to bridge switch's eth0ð1 (like "brctl" in linux), then host1 > ping host2 > > the problem is, how to bridge using netmap? > > I tried example "bridge" in netmap project(git clone > https://code.google.com/p/netmap/): > ./bridge -i netmap:eth0 -i netmap:eth1 > then host1 ping to host2 > but pinging result is "Destination Host Unreachable" (if using brctl, > pinging is fine) > > Then I tried vale-ctl > but i dont know how to use it... > e.g. > ./vale-ctl -a eth0 > show > "eth0: Invalid argument" > > could anyone help me? > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmonnv-L_bnqWYWXP0pD87F4MymGOzVO_AkzQ=1zM7zEuMQ>