Date: Mon, 15 Sep 2014 08:19:37 -0600 From: Brett Glass <brett@lariat.net> To: pyunyh@gmail.com Cc: questions@freebsd.org, net@freebsd.org Subject: Re: jme interface bounces up and down, up and down.... Message-ID: <201409151447.IAA08325@mail.lariat.net> In-Reply-To: <20140915060819.GA967@michelle.fasterthan.com> References: <201409141629.KAA29705@mail.lariat.net> <20140915060819.GA967@michelle.fasterthan.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 12:08 AM 9/15/2014, Yonghyeon PYUN wrote: >Would you show me the output of dmesg(jme(4) and jmphy(4) only) to >know exact chip revision? Here you are. jme0: <JMicron Inc, JMC25x Gigabit Ethernet> port 0xec80-0xecff,0xe800-0xe8ff mem 0xfbffc000-0xfbfff fff irq 18 at device 0.0 on pci1 jme0: MSIX count : 8 jme0: MSI count : 8 jme0: attempting to allocate 1 MSI-X vectors (8 supported) msi: routing MSI-X IRQ 256 to local APIC 0 vector 52 jme0: using IRQ 256 for MSI-X jme0: Using 1 MSIX messages. jme0: PCI device revision : 0x0250 jme0: Chip revision : 0x11 jme0: ethernet hardware address not found in EEPROM. jme0: PHY is at address 1. jme0: Read request size : 512 bytes. jme0: TLP payload size : 128 bytes. miibus0: <MII bus> on jme0 jmphy0: <JMP211 10/100/1000 media interface> PHY 1 on miibus0 jmphy0: OUI 0x00d831, model 0x0021, rev. 1 jmphy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX -flow-master, auto, auto-flow jme0: bpf attached jme0: Ethernet address: e0:cb:4e:54:23:ac I do not particularly like JMicron chips (their faulty SSD controllers have cost me a lot of time and money), but that's what's on the motherboard of this Asus. So, I need to find a way to make it work. --Brett Glass
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201409151447.IAA08325>