Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 27 Aug 2017 13:19:15 +0930
From:      Shane Ambler <FreeBSD@ShaneWare.Biz>
To:        "C. L. Martinez" <carlopmart@gmail.com>, freebsd-questions@freebsd.org
Subject:   Re: Scripting wifi connections
Message-ID:  <44a0b50e-3c4b-86ce-9bda-9e6fc634af35@ShaneWare.Biz>
In-Reply-To: <20170826132404.mpvknkgxl26t5c43@tesla.lab.uxdom.org>
References:  <20170826132404.mpvknkgxl26t5c43@tesla.lab.uxdom.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On 26/08/2017 22:54, C. L. Martinez wrote:
> Hi all,
> 

> Sometimes I need to use two wifi connections at the same time.
> Actually, my FreeBSD laptop is configured to use source routing (via
> setfib+pf rules) to accomplish this. But I need more flexibility: choose
> how many connections to use, setup a wpa_spplicant.conf's file "on the
> fly", etc.
> 
> My current config in rc.conf is:
> 
> dhclient_fib="1"
 > wlans_ath0="wlan0"
 > wlans_urtwn0="wlan1"
> ifconfig_wlan0="country ES WPA SYNCDHCP fib 1 group egress"
> 
> As you can see, I can only have one wlan interface properly
> configured. And my idea is to build a script to setup configurations "on
> the fly".
> 
>   Any tip or idea?

I only have one wlan so haven't tested this -

For two wlans you should be able to add
ifconfig_wlan0="country ES WPA SYNCDHCP fib 1 group egress ssid home"
ifconfig_wlan1="country ES WPA SYNCDHCP fib 1 group egress ssid work"

If needed you can adjust wpa_supplicant flags in rc.conf
wpa_supplicant_flags="-s"
wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"

While wpa_supplicant has the -i ifname and -c config_file options
allowing you to restart it with different configs if you wanted, you
should be able to configure multiple wlans in the one config_file, you
could adjust the one config and SIGHUP wpa_supplicant to re-read it or
have multiple configs setup and tell it to use a different one to suit.

network={
   ssid="home"
   scan_ssid=1
   key_mgmt=WPA-PSK
...
}
network={
   ssid="work"
   scan_ssid=1
   key_mgmt=WPA-EAP
...
}

If using ifconfig wlan1 down to turn off one wlan doesn't work have a
look at wpa_cli to interact with the running wpa_supplicant, it can take
commands so should work from a script. Be sure to set ctrl_interface and
ctrl_interface_group in your wpa_supplicant.conf to use wpa_cli.


-- 
FreeBSD - the place to B...Software Developing

Shane Ambler




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44a0b50e-3c4b-86ce-9bda-9e6fc634af35>