Date: Tue, 10 Dec 1996 22:05:42 GMT From: Aled Morris <aledm@routers.co.uk> To: hardware@freebsd.org Subject: Adaptec 7880 install problem Message-ID: <199612102205.WAA20717@deputy.pavilion.co.uk>
next in thread | raw e-mail | index | archive | help
I have a problem with the onboard SCSI adaptor on a newly purchased system
which I hope to run 2.1.5-RELEASE on.
The adaptor claims to be an Adaptec Ultra/Ultra W BIOS v1.22S2Beta0001
and I have a couple of Wide Seagate Barracudas (2Gb) and a Panasonic
CD-ROM attached.
Using the standard boot floppy, with "-v" I get the following messages
(copied by hand as they flew past!):
ahc0: <Adaptec aic7880 Ultra SCSI host adaptor> rev 0 int a irq 11 on pci0:11
mapreg[10] type=1 addr=00006000 size=0100
mapreg[14] type=0 addr=f0000000 size=1000
ahc0: reading SEEPROM
ahc0: aic7880 Single Channel, SCSI id=7, 1 SCBs
ahc0: Reseting Channel A
ahc0: Downloading Sequencer Program...done
ahc0: Probing Channel A
ahc0 waiting for SCSI devices to settle
All I get after this is a stream of identical messages:
ahc0: ahc_intr - referenced scb no valid during scsiint 0x88 scb(255)
Any ideas? I can't get any further than the boot floppy, so I don't have
much debugging capability.
Aled
--
telephone +44 973 207987 O-
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199612102205.WAA20717>