Date: Tue, 31 Oct 2000 18:28:49 +0100 From: "Jose M. Alcaide" <jose@we.lc.ehu.es> To: stable@FreeBSD.org Subject: Compaq Deskpro hangs on reboot Message-ID: <39FF0151.763CF7AB@we.lc.ehu.es>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------6ADE6967C556095717147B44
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hello,
I have just installed 4.1.1-RELEASE on eight Compaq Deskpro EP with no
exotic hardware (dmesg output attached). Now I have two problems with
these machines. First, any access to the floppy disk causes a complete
lockup. I have to compile a kernel with DDB for finding more data
about this problem.
The other problem got me surprised: these Compaqs hang just after reboot.
When doing a reboot(8), the disks are synced and the system is halted,
but just after displaying the "rebooting..." message, the screen goes
black and the system hangs. Only a power off-on cycle "works". The
same happens if I press any key after doing a halt(8).
I built a kernel with apm support, and "halt -p" powers off the machine,
but reboot continues to fail. I really don't have any idea about what
could be the cause of this problem. Any help will be greatly appreciated!
Cheers,
-- JMA
****** Jose M. Alcaide // jose@we.lc.ehu.es // jmas@FreeBSD.org ******
** "Beware of Programmers who carry screwdrivers" -- Leonard Brandwein **
--------------6ADE6967C556095717147B44
Content-Type: text/plain; charset=us-ascii;
name="dmesg.compaq"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.compaq"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-RELEASE #0: Tue Oct 24 19:56:23 CEST 2000
root@pez9.we.lc.ehu.es:/usr/src/sys/compile/COMPAQ
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (348.21-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 127909888 (124912K bytes)
Preloaded elf kernel "kernel" at 0xc02b5000.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1000-0x101f mem 0x40900000-0x409fffff,0x40a00000-0x40a00fff irq 11 at device 14.0 on pci0
fxp0: Ethernet address 00:08:c7:db:de:74
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1040-0x104f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2
chip1: <Intel 82371AB Power management controller> port 0xfc00-0xfc0f at device 20.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ad0: 4112MB <WDC AC14300R> [8912/15/63] at ata0-master using UDMA33
acd0: CDROM <CD-ROM Philips PCA402CDA> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s2a
--------------6ADE6967C556095717147B44--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39FF0151.763CF7AB>