Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 11 Jun 2010 16:11:48 +0200
From:      "Johan Hendriks" <Johan@double-l.nl>
To:        "Jeremy Chadwick" <freebsd@jdc.parodius.com>, <freebsd-stable@freebsd.org>
Subject:   RE: 8.1 AMD64 Beta1 cd panics on Proliant ML110 G6
Message-ID:  <57200BF94E69E54880C9BB1AF714BBCB0111C2@w2003s01.double-l.local>
References:  <57200BF94E69E54880C9BB1AF714BBCBA57A86@w2003s01.double-l.local> <4C120144.80002@icyb.net.ua> <57200BF94E69E54880C9BB1AF714BBCBA57A90@w2003s01.double-l.local> <20100611134555.GA9682@icarus.home.lan>

next in thread | previous in thread | raw e-mail | index | archive | help

>> >> Hello all.
>> >>=20
>> >> I try to install the Beta of 8.1 but it panics on my server HP
>> Proliant ML110

>>=20
>>>Stacktrace would be helpful.
>>=20
>> Well at startup, the keyboard is not working, i can not select any =
boot
>> mode, and after the timer is at 0 ti boots, and then ends with this
>> panic, and totally hangs.
>> 8.0 works fine also CURRENT Works!

>Regarding the keyboard not working -- it should still be working during
>the loader phase (FreeBSD logo, press 4 for single user, etc.), =
correct?

>If so, two things to try.  Escape to the loader prompt and try one of
>the below (if (a) doesn't work, try (b)):

>a) set hint.kbdmux.0.disabled=3D1
>   boot

>b) set hint.atkbd.0.disabled=3D1
>  set hint.atkbdc.0.disabled=3D1
>   boot

>Hopefully one of these will allow your keyboard to continue functioning
>once the system panics, so that you can provide a backtrace.  Thanks.
>
>--=20
>| Jeremy Chadwick                                   jdc@parodius.com |
>| Parodius Networking                       http://www.parodius.com/ |
>| UNIX Systems Administrator                  Mountain View, CA, USA |
>| Making life hard for others since 1977.              PGP: 4BD6C0CB |

The problem is the keyboard is not working at all, so i need to wait =
till the counter reach 0.
I did also installed 8.0, no problem.
Then did a buildworld to the latest 8.1 source from 2010-06-08, =
buildworld runs fine, then after the reboot same issue as the =
BETA1-install-only iso.

regards,
Johan Hendriks



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?57200BF94E69E54880C9BB1AF714BBCB0111C2>