Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Jul 2007 17:47:15 -0700
From:      "Kurt Buff" <>
To:        "Derek Ragona" <>
Cc:        FreeBSD <>
Subject:   Re: Installation woes with 6.2 release
Message-ID:  <>
In-Reply-To: <>
References:  <> <> <> <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 7/9/07, Derek Ragona <> wrote:
>  At 04:20 PM 7/9/2007, Kurt Buff wrote:
> On 7/9/07, Derek Ragona <> wrote:
>   At 03:43 PM 7/9/2007, Kurt Buff wrote:
>  I've got a machine with 2GB of RAM, onto which I can install Windows
>   XP with no issues.
>   However, FreeBSD 6.2 Release is giving me fits on this machine. If any
>   of you have insight, I'd surely appreciate you sharing
>   The motherboard is an Intel D645 GEBV2. I've tried a couple of
>   different disk arrangements, with no success.
>   I've installed an IDE WD 180GB drive, which the motherboard BIOS
>   detects just fine. When I boot from disk 1 for the FreeBSD install, it
>   detects no hard drive.
>   I've put in an Addonics ADSA2 PCI SATA card, which sports the SiL
>   1352A chipset, but the install blows up when installing to a 74GB
>   Seagate drive - the kernel panics and it reboots while copying files
>   to disk.
>   Has anyone run into these problems? Google hasn't been particularly my
>   friend on this one.
>   I've tried reading the install docs on the CD, with no particular
>   luck, but I could be missing something.
>   Clearly you have a disk controller compatibility problem.  I do know the
>  Sil chips are terrible, and there is a long history of issues with these
>  chips and FreeBSD!
>   Can you find a regular IDE drive to plug into that motherboard?
>           -Derek
>  Plugging an IDE drive into the motherboard is the first thing I did -
>  that's the case above where FreeBSD didn't see *any* HD. That's the
>  one that really fries my brain, because the motherboard BIOS detects
>  it correctly, and XP installs to it just fine.
>  Any possibility the IDE master/slave jumper is not set right on that drive?
>  On some intel MB's it takes a reboot into setup so that setup see's the
> hard drive, then check that it has that hard drive in the boot order.  I
> know this seems a bit simple, but just trying to check all possibilities.
> I've never seen a problem with a standard IDE drive installation.  After you
> had XP on the drive did you reformat the drive to clear it out?
>          -Derek

I think I'll go beat my lackey again.

He was supposed to remove the jumper, and didn't do it.

I took it off, and it's installing happily to the IDE drive.

I'm gonna bag the SATA for now.

Thanks for your help,


Want to link to this message? Use this URL: <>