Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 27 Aug 2000 15:34:18 -0700
From:      Kent Stewart <kstewart@urx.com>
To:        "Herbert J. Skuhra" <h.j.s@gmx.at>
Cc:        freebsd-stable@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG
Subject:   Re: ata0-slave doesn't show up!
Message-ID:  <39A9976A.44BA0E41@urx.com>
References:  <20000827120008.A73952@freebsd2.rocks> <009201c0105d$5963f5a0$cd430ace@mark8> <20000827223938.A993@freebsd2.rocks> <39A97E91.D5CC1018@urx.com> <20000828001024.A185@freebsd2.rocks>

next in thread | previous in thread | raw e-mail | index | archive | help


"Herbert J. Skuhra" wrote:
> 
> Hi Kent and thanks for your reply!
> 
> I followed all the steps described in /usr/src/UPDATING to upgrade from
> 4.1-RELEASE to 4.1-STABLE. Running the 4.1-RELEASE kernel all hard
> drives are detected correctly, but when I boot the 4.1-STABLE kernel
> ata0-slave is missing. Userland and kernel are in sync.
> 
> I guess some changes to the ata-code commited between
> 2000.08.22.00.00.00 and 2000.08.23.00.00.00 to RELENG_4 are causing that
> my ata0-slave drive is no longer detected.
> 
> Downgrading the sources to 2000.08.21.00.00.00 brings back ata0-slave.

> 
> Any ideas?


Not off the top. You can see what was changed using
http://www.freebsd.org/cgi/cvsweb.cgi/. You want to end up at
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/ata/

Beyond that I don't have any ideas. The date on .../ata is wrong at
times. You are only worrying about the ata-disk, which I think was
changed on 22 Aug 00 to make the UDMA100 work better :).

Kent

> 
> Best Regards,
> Herbert
> 
> * Kent Stewart (kstewart@urx.com) [000827 23:49]:
> >
> > It doesn't work this way. You are lucky you can even run anything. If
> > you cvsup, you build both the userland and the kernel. You also have
> > to pay attention to how you build the kernel. You do that by following
> > the receipe in /usr/src/UPDATING. It is missing a mergemaster command
> > after the installworld.
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message

-- 
Kent Stewart
Richland, WA

mailto:kbstew99@hotmail.com
http://kstewart.urx.com/kstewart/index.html
FreeBSD News http://daily.daemonnews.org/


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39A9976A.44BA0E41>