Date: Thu, 28 Feb 2002 11:52:43 -0800 (PST) From: Oliver Blasnik <oliver.blasnik@nextra.de> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/35425: System hang while boot on specific SMP motherboard Message-ID: <200202281952.g1SJqh008142@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 35425 >Category: kern >Synopsis: System hang while boot on specific SMP motherboard >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Feb 28 12:00:12 PST 2002 >Closed-Date: >Last-Modified: >Originator: Oliver Blasnik >Release: 4.5R, 5.0current >Organization: Nextra Germany >Environment: impossible... >Description: I've got a 1U System for testing, and I tried to.... But after creating a SMP-kernel the system hangs at the SCSI device check. Specs are listed at http://www.eslim.co.kr/product/su2_spec.htm. In short: Dual Processor Board using ServerWorks III LE. This hardware works excellent with RedHat 7 and (sorry...:) WinXP, but no available FreeBSD-Version. I'm not sure, but the "APIC_IO: routing 8254 via IOAPIC #0 intpin 0" doesn't look really good... Here the two "boot -v" I made via serial console (from 4.5R and current): boot -v SMAP type=01 base=00000000 00000000 len=00000000 0009f400 SMAP type=02 base=00000000 0009f400 len=00000000 00000c00 SMAP type=02 base=00000000 000e7400 len=00000000 00018c00 SMAP type=01 base=00000000 00100000 len=00000000 0fef0000 SMAP type=03 base=00000000 0fff0000 len=00000000 0000fc00 SMAP type=04 base=00000000 0ffffc00 len=00000000 00000400 SMAP type=02 base=00000000 fec00000 len=00000000 00010000 SMAP type=02 base=00000000 fee00000 len=00000000 00001000 SMAP type=02 base=00000000 fff80000 len=00000000 00080000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Thu Feb 28 15:19:16 CET 2002 root@ip131.lab.nextra.de:/usr/src/sys/compile/ONEKERN Calibrating clock(s) ... TSC clock: 996794894 Hz, i8254 clock: 1193126 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (996.85-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268369920 (262080K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0037f000 - 0x0ffe7fff, 264671232 bytes (64617 pages) kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 avail memory = 257810432 (251768K bytes) Programming 16 pins in IOAPIC #0 Programming 16 pins in IOAPIC #1 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 bios32: Found BIOS32 Service Directory header at 0xc00f7af0 bios32: Entry = 0xfd8f0 (c00fd8f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x12f pnpbios: Found PnP BIOS data at 0xc00f7b20 pnpbios: Entry = f0000:9848 Rev = 1.0 Other BIOS signatures found: ACPI: 000f7a90 Preloaded elf kernel "kernel" at 0xc0355000. Pentium Pro MTRR support enabled SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard found-> vendor=0x1166, dev=0x0009, revid=0x06 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0009, revid=0x06 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 IOAPIC #1 intpin 4 -> irq 16 Freeing (NOT implemented) redirected PCI irq 10. found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[10]: type 1, range 32, base fb100000, size 12 map[14]: type 1, range 32, base 00001800, size 6 map[18]: type 1, range 32, base fb000000, size 20 IOAPIC #1 intpin 5 -> irq 17 Freeing (NOT implemented) redirected PCI irq 7. found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=17 map[10]: type 1, range 32, base fb101000, size 12 map[14]: type 1, range 32, base 00001840, size 6 map[18]: type 1, range 32, base fb200000, size 20 IOAPIC #1 intpin 8 -> irq 18 Freeing (NOT implemented) redirected PCI irq 5. found-> vendor=0x9005, dev=0x008f, revid=0x02 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=18 map[10]: type 1, range 32, base 00001000, size 8 map[14]: type 1, range 64, base fb102000, size 12 IOAPIC #1 intpin 9 -> irq 19 Freeing (NOT implemented) redirected PCI irq 11. found-> vendor=0x1002, dev=0x4752, revid=0x27 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=19 map[10]: type 1, range 32, base fa000000, size 24 map[14]: type 1, range 32, base 00001400, size 8 map[18]: type 1, range 32, base fb103000, size 12 found-> vendor=0x1166, dev=0x0200, revid=0x50 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0211, revid=0x00 class=01-01-8a, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00001880, size 4 found-> vendor=0x1166, dev=0x0220, revid=0x04 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base fb104000, size 12 pci0: <PCI bus> on pcib0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1800-0x183f mem 0xfb000000-0xfb0fffff,0xfb100000-0xfb100fff irq 16 at device 7.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:c0:9f:06:8c:66 fxp0: PCI IDs: 8086 1229 152d 8917 0008 fxp0: Dynamic Standby mode is disabled inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x1840-0x187f mem 0xfb200000-0xfb2fffff,0xfb101000-0xfb101fff irq 17 at device 9.0 on pci0 fxp1: using memory space register mapping fxp1: Ethernet address 00:c0:9f:06:8c:65 fxp1: PCI IDs: 8086 1229 152d 8917 0008 fxp1: Dynamic Standby mode is disabled inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp1 attached ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xfb102000-0xfb102fff irq 18 at device 11.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Manual SE Termination ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 419 instructions downloaded aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 12.0 irq 19 isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1880-0x188f at device 15.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1880 ata0: mask=03 status0=50 status1=7f ata0: mask=03 ostat0=50 ostat2=7f ata0-master: ATAPI probe a=14 b=eb ata0-slave: ATAPI probe a=7f b=7f ata0: mask=03 status0=00 status1=7f ata0-slave: ATA probe a=ff b=7f ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1888 ata1: mask=03 status0=20 status1=30 ata1: mask=03 ostat0=20 ostat2=30 ata1-master: ATAPI probe a=20 b=20 ata1-slave: ATAPI probe a=30 b=30 ata1: mask=03 status0=20 status1=30 ata1-master: ATA probe a=25 b=25 ata1-slave: ATA probe a=25 b=25 ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 pci0: <OHCI USB controller> (vendor=0x1166, dev=0x0220) at 15.2 irq 9 pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe3fff,0xe4000-0xe5fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 02 30 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x4041 0x4051 0x4041 0x4041 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x4041 0x4041 0x4041 0x4041 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 isa_probe_children: probing PnP devices SMP: enabled INTs: 4, 6, 14, 15, 16, 17, 18, apic_imen: 0x00f83faf BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. APIC_IO: routing 8254 via IOAPIC #0 intpin 0 bpf: vlan0 attached bpf: vlan1 attached bpf: vlan2 attached bpf: vlan3 attached IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default BRIDGE 011031, have 6 interfaces -- index 1 type 6 phy 0 addrl 6 addr 00.c0.9f.06.8c.66 -- index 2 type 6 phy 0 addrl 6 addr 00.c0.9f.06.8c.65 bpf: lo0 attached DUMMYNET initialized (011031) bpf: faith0 attached SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata0-master: success setting PIO4 on generic chip acd0: <MATSHITA CR-177/7T03> CDROM drive at ata0 as master acd0: read 4125KB/s (32015KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Waiting 3 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. ACPI autoload failed - no such file or directory SMAP type=01 base=00000000 00000000 len=00000000 0009f400 SMAP type=02 base=00000000 0009f400 len=00000000 00000c00 SMAP type=02 base=00000000 000e7400 len=00000000 00018c00 SMAP type=01 base=00000000 00100000 len=00000000 0fef0000 SMAP type=03 base=00000000 0fff0000 len=00000000 0000fc00 SMAP type=04 base=00000000 0ffffc00 len=00000000 00000400 SMAP type=02 base=00000000 fec00000 len=00000000 00010000 SMAP type=02 base=00000000 fee00000 len=00000000 00001000 SMAP type=02 base=00000000 fff80000 len=00000000 00080000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20020219-CURRENT #0: Thu Feb 28 17:55:11 CET 2002 root@onetest:/usr/src/sys/i386/compile/ONETEST Preloaded elf kernel "/boot/kernel/kernel" at 0xc03b1000. Calibrating clock(s) ... TSC clock: 996790104 Hz, i8254 clock: 1193120 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (996.85-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268369920 (262080K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003db000 - 0x0ffe7fff, 264294400 bytes (64525 pages) avail memory = 257269760 (251240K bytes) Programming 16 pins in IOAPIC #0 Programming 16 pins in IOAPIC #1 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 bios32: Found BIOS32 Service Directory header at 0xc00f7af0 bios32: Entry = 0xfd8f0 (c00fd8f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd8f0+0x12f pnpbios: Found PnP BIOS data at 0xc00f7b20 pnpbios: Entry = f0000:9848 Rev = 1.0 Other BIOS signatures found: random: <entropy source> null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 0 on motherboard pci0: physical bus=0 found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 IOAPIC #1 intpin 4 -> irq 16 Freeing (NOT implemented) redirected PCI irq 10. map[10]: type 1, range 32, base fb100000, size 12, enabled map[14]: type 4, range 32, base 00001800, size 6, enabled map[18]: type 1, range 32, base fb000000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=16 powerspec 2 supports D0 D1 D2 D3 current D0 IOAPIC #1 intpin 5 -> irq 17 Freeing (NOT implemented) redirected PCI irq 7. map[10]: type 1, range 32, base fb101000, size 12, enabled map[14]: type 4, range 32, base 00001840, size 6, enabled map[18]: type 1, range 32, base fb200000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=17 powerspec 2 supports D0 D1 D2 D3 current D0 IOAPIC #1 intpin 8 -> irq 18 Freeing (NOT implemented) redirected PCI irq 5. map[10]: type 4, range 32, base 00001000, size 8, enabled map[14]: type 1, range 64, base fb102000, size 12, enabled found-> vendor=0x9005, dev=0x008f, revid=0x02 bus=0, slot=11, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=18 powerspec 2 supports D0 D3 current D0 IOAPIC #1 intpin 9 -> irq 19 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 1, range 32, base fa000000, size 24, enabled map[14]: type 4, range 32, base 00001400, size 8, enabled map[18]: type 1, range 32, base fb103000, size 12, enabled found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=0, slot=12, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=19 powerspec 2 supports D0 D1 D2 D3 current D0 map[90]: type 4, range 32, base 00000580, size 4, enabled found-> vendor=0x1166, dev=0x0200, revid=0x50 bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 map[20]: type 4, range 32, base 00001880, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 map[10]: type 1, range 32, base fb104000, size 12, enabled found-> vendor=0x1166, dev=0x0220, revid=0x04 bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 intpin=a, irq=9 pci0: <PCI bus> on pcib0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1800-0x183f mem 0xfb000000-0xfb0fffff,0xfb100000-0xfb100fff irq 16 at device 7.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:c0:9f:06:8c:66 fxp0: PCI IDs: 8086 1229 152d 8917 0008 fxp0: Dynamic Standby mode is disabled inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x1840-0x187f mem 0xfb200000-0xfb2fffff,0xfb101000-0xfb101fff irq 17 at device 9.0 on pci0 fxp1: using memory space register mapping fxp1: Ethernet address 00:c0:9f:06:8c:65 fxp1: PCI IDs: 8086 1229 152d 8917 0008 fxp1: Dynamic Standby mode is disabled inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp1 attached ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xfb102000-0xfb102fff irq 18 at device 11.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Manual SE Termination ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 419 instructions downloaded aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs pci0: <display, VGA> at device 12.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1880-0x188f at device 15.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1880 ata0: mask=03 ostat0=50 ostat2=7f ata0-master: ATAPI 14 eb ata0-slave: ATAPI 7f 7f ata0: mask=03 stat0=00 stat1=7f ata0-slave: ATA ff 7f ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1888 ata1: mask=03 ostat0=20 ostat2=30 ata1-master: ATAPI 20 20 ata1-slave: ATAPI 30 30 ata1: mask=03 stat0=20 stat1=30 ata1-master: ATA 25 25 ata1-slave: ATA 25 25 ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfb104000-0xfb104fff irq 9 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 1 on motherboard pci1: physical bus=1 pci1: <PCI bus> on pcib1 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 17 devices, largest 138 bytes PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 pnpbios: handle 0 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000 PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x500-0x53f, size=0x40, align=0x1 PNP0c02: adding io range 0x580-0x58f, size=0x10, align=0x1 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0xe0000-0xe3fff, size=0x4000, align=0x4000 pnpbios: handle 11 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0xe4000-0xe5fff, size=0x2000, align=0x2000 pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xcd200-0xcffff, size=0x2e00 pnpbios: handle 14 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 15 device ID PNP0501 (0105d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 17 device ID PNP0700 (0007d041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe4000-0xe5fff,0xe0000-0xe3fff,0xc0000-0xc7fff on isa0 adv0 failed to probe on isa0 aha0 failed to probe on isa0 aic0 failed to probe on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. bt0 failed to probe on isa0 cs0 failed to probe at port 0x300 on isa0 ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0 failed to probe at port 0x300 on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) pmtimer0 on isa0 ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x4001 0x4011 0x4001 0x4001 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4001 0x4001 0x4001 0x4001 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0 failed to probe at port 0x300 irq 10 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0c02> can't assign resources unknown: <PNP0c02> at iomem 0xe0000-0xe3fff on isa0 unknown: <PNP0c02> can't assign resources unknown: <PNP0c02> at iomem 0xe4000-0xe5fff on isa0 unknown: <PNP0501> can't assign resources unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0700> can't assign resources unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 SMP: enabled INTs: 4, 6, 9, 14, 15, 16, 17, 18, apic_imen: 0xfff83daf BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. procfs registered APIC_IO: routing 8254 via IOAPIC #0 intpin 0 bpf: lo0 attached bpf: ppp0 attached ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata0-master: success setting PIO4 on generic chip acd0: <MATSHITA CR-177/7T03> CDROM drive at ata0 as master acd0: read 4125KB/s (32015KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 3 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. >How-To-Repeat: Get it and loose :( >Fix: Do not use SMP-enabled kernel? just a joke ;) >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200202281952.g1SJqh008142>