Date: Mon, 2 Jul 2001 11:10:46 -0400 From: "Person, Roderick" <personrp@ccbh.com> To: "'charlivm@eircom.net'" <charlivm@eircom.net>, freebsd-questions@freebsd.org Subject: RE: Soundcard trouble Message-ID: <46AEB8C1B628D511969200508B6FE42A66846A@1upmc-msx6.isdip.upmc.edu>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C10309.2BAD6F20 Content-Type: text/plain; charset="iso-8859-1" I would uncomment your device pcm0 line and comment out the sbc0 line. Recompile the kernal and make the pcm device. device pcm0 at isa? irq 10 drq 1 flags 0x0 #device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 Roderick P. Person Programmer II Crystal Administrator personrp@ccbh.com "There are many things that you're not supposed to eat, especially children." - Mary Margaret McBride, radio personality > -----Original Message----- > From: charlivm@eircom.net [mailto:charlivm@eircom.net] > Sent: July 02, 2001 11:03 AM > To: freebsd-questions@freebsd.org > Subject: Soundcard trouble > > > Hi, > > I'm using FreeBSD 4.2, having some problems getting my > soundcard to work. > > The card is an ISA SoundBlaster AWE 64 (the usual config, > port 0x220, irq 5, dma 1) > > The kernel configuration file I'm using: > > machine i386 > > cpu I686_CPU > ident GLAUKOS > maxusers 32 > > #makeoptions DEBUG=-g #Build kernel with > gdb(1) debug symbols > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root > device [keep this!] > options SOFTUPDATES #Enable FFS soft > updates support > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > options NFS #Network Filesystem > options NFS_ROOT #NFS usable as root > device, NFS required > options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as > root, CD9660 required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD > 4.3 [KEEP THIS!] > options UCONSOLE #Allow users to grab > the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B > real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > device isa > device eisa > device pci > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > device fd1 at fdc0 drive 1 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible > console driver > #device vt0 at isa? > #options XSERVER # support for X > server on a vt console > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest > of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > #device apm0 at nexus? disable flags 0x20 # > Advanced Power Management > > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to > use these NICs! > device miibus # MII bus support > device rl # RealTek 8129/8139 > > # Pseudo devices - the number indicates how many units to allocated. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif 4 # IPv6 and IPv4 tunneling > pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > pseudo-device bpf #Berkeley packet filter > > options IPFILTER > options IPFILTER_LOG > > > #device sb0 at isa? port 0x220 irq 5 drq 1 > > #device pcm0 at isa? irq 10 drq 1 flags 0x0 > > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 > > end of kernel config file > > dmesg output when booting this kernel: > > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, > 1993, 1994 > The Regents of the University of California. All > rights reserved. > FreeBSD 4.2-RELEASE #0: Mon Jul 2 14:56:40 IST 2001 > root@glaukos.phaxx.cx:/usr/src/sys/compile/SNDGLAUKOS > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 700031872 Hz > CPU: AMD Duron(tm) Processor (700.03-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x630 Stepping = 0 > > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR > ,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> > real memory = 268369920 (262080K bytes) > config> di sn0 > No such device: sn0 > Invalid command or syntax. Type `?' for help. > config> di lnc0 > No such device: lnc0 > Invalid command or syntax. Type `?' for help. > config> di ie0 > No such device: ie0 > Invalid command or syntax. Type `?' for help. > config> di fe0 > No such device: fe0 > Invalid command or syntax. Type `?' for help. > config> di cs0 > No such device: cs0 > Invalid command or syntax. Type `?' for help. > config> di bt0 > No such device: bt0 > Invalid command or syntax. Type `?' for help. > config> di aic0 > No such device: aic0 > Invalid command or syntax. Type `?' for help. > config> di aha0 > No such device: aha0 > Invalid command or syntax. Type `?' for help. > config> di adv0 > No such device: adv0 > Invalid command or syntax. Type `?' for help. > config> en atkbd0 > config> ir atkbd0 1 > config> f atkbd0 0x1 > config> q > avail memory = 258191360 (252140K bytes) > Preloaded elf kernel "kernel" at 0xc031a000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc031a09c. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at > device 1.0 on pci0 > pci1: <PCI bus> on pcib2 > pci1: <S3 Savage 4 graphics accelerator> at 0.0 irq 10 > isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686 ATA66 controller> port 0xe000-0xe00f at > device 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <VIA 83C572 USB controller> at 7.2 irq 11 > pci0: <VIA 83C572 USB controller> at 7.3 irq 11 > rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem > 0xdf000000-0xdf0000ff irq 11 at device 11.0 on pci0 > rl0: Ethernet address: 00:a0:d2:13:0b:b0 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pcib1: <Host to PCI bridge> on motherboard > pci2: <PCI bus> on pcib1 > isa0: too many dependant configs (8) > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 > drq 2 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sbc1: <Creative SB AWE64 Gold> at port > 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 > IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled > ad0: 4120MB <Maxtor 84320D4> [8930/15/63] at ata0-master UDMA33 > acd0: CDROM <FX001DE> at ata1-master using PIO3 > acd1: CDROM <FX322M> at ata1-slave using PIO4 > Mounting root from ufs:/dev/ad0s2a > cd9660: RockRidge Extension > > end of dmesg output > > I have made the necessary device nodes with MAKEDEV snd0 but > I'm given a "Device not configured" error when I try to use > any of them (audio,dsp,whatever) > > I would greatly appreciate any help with this. > > Thanks! > > Charlie > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > ------_=_NextPart_001_01C10309.2BAD6F20 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version = 5.5.2653.12"> <TITLE>RE: Soundcard trouble</TITLE> </HEAD> <BODY> <P><FONT SIZE=3D2>I would uncomment your device pcm0 line and comment = out the sbc0 line. Recompile the kernal and make the pcm device.</FONT> </P> <P><FONT SIZE=3D2>device pcm0 at isa? irq 10 drq 1 = flags 0x0</FONT> </P> <P><FONT SIZE=3D2>#device sbc0 at isa? port = 0x220 irq 5 drq 1 flags 0x15</FONT> </P> <BR> <P><FONT SIZE=3D2>Roderick P. Person</FONT> <BR><FONT SIZE=3D2>Programmer II</FONT> <BR><FONT SIZE=3D2>Crystal Administrator</FONT> <BR><FONT SIZE=3D2>personrp@ccbh.com</FONT> </P> <P><FONT SIZE=3D2>"There are many things that you're not supposed = to eat, especially</FONT> <BR><FONT SIZE=3D2>children."</FONT> </P> <P> <FONT SIZE=3D2>- Mary = Margaret McBride, radio personality</FONT> </P> <BR> <BR> <BR> <BR> <BR> <BR> <P><FONT SIZE=3D2>> -----Original Message-----</FONT> <BR><FONT SIZE=3D2>> From: charlivm@eircom.net [<A = HREF=3D"mailto:charlivm@eircom.net">mailto:charlivm@eircom.net</A>]</FON= T> <BR><FONT SIZE=3D2>> Sent: July 02, 2001 11:03 AM</FONT> <BR><FONT SIZE=3D2>> To: freebsd-questions@freebsd.org</FONT> <BR><FONT SIZE=3D2>> Subject: Soundcard trouble</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> Hi,</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> I'm using FreeBSD 4.2, having some problems = getting my </FONT> <BR><FONT SIZE=3D2>> soundcard to work.</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> The card is an ISA SoundBlaster AWE 64 (the = usual config, </FONT> <BR><FONT SIZE=3D2>> port 0x220, irq 5, dma 1)</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> The kernel configuration file I'm using:</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> = machine i386</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> = cpu &nb= sp; I686_CPU</FONT> <BR><FONT SIZE=3D2>> = ident = GLAUKOS</FONT> <BR><FONT SIZE=3D2>> = maxusers 32</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> #makeoptions = DEBUG=3D-g &n= bsp; #Build kernel with </FONT> <BR><FONT SIZE=3D2>> gdb(1) debug symbols</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> = options = MATH_EMULATE = #Support for x87 emulation</FONT> <BR><FONT SIZE=3D2>> = options = INET &n= bsp; #InterNETworking</FONT> <BR><FONT SIZE=3D2>> = options = INET6 &= nbsp; #IPv6 communications = protocols</FONT> <BR><FONT SIZE=3D2>> = options = FFS &nb= sp; #Berkeley Fast = Filesystem</FONT> <BR><FONT SIZE=3D2>> = options = FFS_ROOT &nbs= p; #FFS usable as root </FONT> <BR><FONT SIZE=3D2>> device [keep this!]</FONT> <BR><FONT SIZE=3D2>> = options = SOFTUPDATES &= nbsp; #Enable FFS soft </FONT> <BR><FONT SIZE=3D2>> updates support</FONT> <BR><FONT SIZE=3D2>> = options = MFS &nb= sp; #Memory = Filesystem</FONT> <BR><FONT SIZE=3D2>> = options = MD_ROOT  = ; #MD is a potential root device</FONT> <BR><FONT SIZE=3D2>> = options = NFS &nb= sp; #Network = Filesystem</FONT> <BR><FONT SIZE=3D2>> = options = NFS_ROOT &nbs= p; #NFS usable as root </FONT> <BR><FONT SIZE=3D2>> device, NFS required</FONT> <BR><FONT SIZE=3D2>> = options = MSDOSFS  = ; #MSDOS Filesystem</FONT> <BR><FONT SIZE=3D2>> = options = CD9660 = #ISO 9660 Filesystem</FONT> <BR><FONT SIZE=3D2>> = options = CD9660_ROOT &= nbsp; #CD-ROM usable as </FONT> <BR><FONT SIZE=3D2>> root, CD9660 required</FONT> <BR><FONT SIZE=3D2>> = options = PROCFS = #Process filesystem</FONT> <BR><FONT SIZE=3D2>> = options = COMPAT_43 &nb= sp; #Compatible with BSD </FONT> <BR><FONT SIZE=3D2>> 4.3 [KEEP THIS!]</FONT> <BR><FONT SIZE=3D2>> = options = UCONSOLE &nbs= p; #Allow users to grab </FONT> <BR><FONT SIZE=3D2>> the console</FONT> <BR><FONT SIZE=3D2>> = options = USERCONFIG &n= bsp; #boot -c editor</FONT> <BR><FONT SIZE=3D2>> = options = VISUAL_USERCONFIG #visual boot -c = editor</FONT> <BR><FONT SIZE=3D2>> = options = KTRACE = #ktrace(1) support</FONT> <BR><FONT SIZE=3D2>> = options = SYSVSHM  = ; #SYSV-style shared memory</FONT> <BR><FONT SIZE=3D2>> = options = SYSVMSG  = ; #SYSV-style message queues</FONT> <BR><FONT SIZE=3D2>> = options = SYSVSEM  = ; #SYSV-style semaphores</FONT> <BR><FONT SIZE=3D2>> = options = P1003_1B &nbs= p; #Posix P1003_1B </FONT> <BR><FONT SIZE=3D2>> real-time extensions</FONT> <BR><FONT SIZE=3D2>> = options = _KPOSIX_PRIORITY_SCHEDULING</FONT> <BR><FONT SIZE=3D2>> = options = ICMP_BANDLIM = #Rate limit bad replies</FONT> <BR><FONT SIZE=3D2>> = options = KBD_INSTALL_CDEV # install a = CDEV entry in /dev</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> = device isa</FONT> <BR><FONT SIZE=3D2>> = device = eisa</FONT> <BR><FONT SIZE=3D2>> = device pci</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # Floppy drives</FONT> <BR><FONT SIZE=3D2>> = device = fdc0 at isa? port IO_FD1 irq 6 drq 2</FONT> <BR><FONT SIZE=3D2>> = device = fd0 at fdc0 drive 0</FONT> <BR><FONT SIZE=3D2>> = device = fd1 at fdc0 drive 1</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # ATA and ATAPI devices</FONT> <BR><FONT SIZE=3D2>> = device = ata0 at isa? port IO_WD1 irq 14</FONT> <BR><FONT SIZE=3D2>> = device = ata1 at isa? port IO_WD2 irq 15</FONT> <BR><FONT SIZE=3D2>> = device ata</FONT> <BR><FONT SIZE=3D2>> = device = atadisk  = ; # ATA disk drives</FONT> <BR><FONT SIZE=3D2>> = device = atapicd  = ; # ATAPI CDROM drives</FONT> <BR><FONT SIZE=3D2>> = device = atapifd  = ; # ATAPI floppy drives</FONT> <BR><FONT SIZE=3D2>> = device = atapist  = ; # ATAPI tape drives</FONT> <BR><FONT SIZE=3D2>> = options = ATA_STATIC_ID  = ; #Static device numbering</FONT> <BR><FONT SIZE=3D2>> = #options = ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI = devices</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # atkbdc0 controls both the keyboard and the = PS/2 mouse</FONT> <BR><FONT SIZE=3D2>> = device atkbdc0 at = isa? port IO_KBD</FONT> <BR><FONT SIZE=3D2>> = device = atkbd0 at atkbdc? irq 1 flags 0x1</FONT> <BR><FONT SIZE=3D2>> = device = psm0 at atkbdc? irq 12</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> = device = vga0 at isa?</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # splash screen/screen saver</FONT> <BR><FONT SIZE=3D2>> pseudo-device splash</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # syscons is the default console driver, = resembling an SCO console</FONT> <BR><FONT SIZE=3D2>> = device = sc0 at isa? flags 0x100</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # Enable this and PCVT_FREEBSD for pcvt vt220 = compatible </FONT> <BR><FONT SIZE=3D2>> console driver</FONT> <BR><FONT SIZE=3D2>> = #device = vt0 at isa?</FONT> <BR><FONT SIZE=3D2>> = #options = XSERVER  = ; # support for X </FONT> <BR><FONT SIZE=3D2>> server on a vt console</FONT> <BR><FONT SIZE=3D2>> = #options = FAT_CURSOR &n= bsp; # start with block cursor</FONT> <BR><FONT SIZE=3D2>> # If you have a ThinkPAD, uncomment this along = with the rest </FONT> <BR><FONT SIZE=3D2>> of the PCVT lines</FONT> <BR><FONT SIZE=3D2>> = #options = PCVT_SCANSET=3D2 = # IBM keyboards are non-std</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # Floating point support - do not = disable.</FONT> <BR><FONT SIZE=3D2>> = device = npx0 at nexus? port IO_NPX irq 13</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # Power management support (see LINT for more = options)</FONT> <BR><FONT SIZE=3D2>> = #device = apm0 at nexus? disable flags 0x20 # </FONT> <BR><FONT SIZE=3D2>> Advanced Power Management</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # Serial (COM) ports</FONT> <BR><FONT SIZE=3D2>> = device = sio0 at isa? port IO_COM1 flags 0x10 irq 4</FONT> <BR><FONT SIZE=3D2>> = device = sio1 at isa? port IO_COM2 irq 3</FONT> <BR><FONT SIZE=3D2>> = device = sio2 at isa? disable port IO_COM3 irq 5</FONT> <BR><FONT SIZE=3D2>> = device = sio3 at isa? disable port IO_COM4 irq 9</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # Parallel port</FONT> <BR><FONT SIZE=3D2>> = device = ppc0 at isa? irq 7</FONT> <BR><FONT SIZE=3D2>> = device = ppbus # = Parallel port bus (required)</FONT> <BR><FONT SIZE=3D2>> = device = lpt &nb= sp; # Printer</FONT> <BR><FONT SIZE=3D2>> = device = plip = # TCP/IP over parallel</FONT> <BR><FONT SIZE=3D2>> = device = ppi &nb= sp; # Parallel port interface device</FONT> <BR><FONT SIZE=3D2>> = #device = vpo &nb= sp; # Requires scbus and da</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # PCI Ethernet NICs that use the common MII bus = controller code.</FONT> <BR><FONT SIZE=3D2>> # NOTE: Be sure to keep the 'device miibus' = line in order to </FONT> <BR><FONT SIZE=3D2>> use these NICs!</FONT> <BR><FONT SIZE=3D2>> = device = miibus # MII bus = support</FONT> <BR><FONT SIZE=3D2>> = device = rl &nbs= p; # RealTek 8129/8139</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # Pseudo devices - the number indicates how = many units to allocated.</FONT> <BR><FONT SIZE=3D2>> pseudo-device = loop = # Network loopback</FONT> <BR><FONT SIZE=3D2>> pseudo-device = ether # = Ethernet support</FONT> <BR><FONT SIZE=3D2>> pseudo-device = sl 1 = # Kernel SLIP</FONT> <BR><FONT SIZE=3D2>> pseudo-device = ppp 1 # = Kernel PPP</FONT> <BR><FONT SIZE=3D2>> pseudo-device = tun &nb= sp; # Packet tunnel.</FONT> <BR><FONT SIZE=3D2>> pseudo-device = pty &nb= sp; # Pseudo-ttys (telnet etc)</FONT> <BR><FONT SIZE=3D2>> pseudo-device = md &nbs= p; # Memory "disks"</FONT> <BR><FONT SIZE=3D2>> pseudo-device = gif 4 # = IPv6 and IPv4 tunneling</FONT> <BR><FONT SIZE=3D2>> pseudo-device faith = 1 # IPv6-to-IPv4 relaying = (translation)</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> # The `bpf' pseudo-device enables the Berkeley = Packet Filter.</FONT> <BR><FONT SIZE=3D2>> # Be aware of the administrative consequences = of enabling this!</FONT> <BR><FONT SIZE=3D2>> pseudo-device = bpf &nb= sp; #Berkeley packet filter</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> options IPFILTER</FONT> <BR><FONT SIZE=3D2>> options IPFILTER_LOG</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> #device sb0 at isa? = port 0x220 irq 5 drq 1</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> #device pcm0 at isa? irq 10 = drq 1 flags 0x0</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> device sbc0 at isa? = port 0x220 irq 5 drq 1 flags 0x15</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> end of kernel config file</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> dmesg output when booting this kernel:</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> Copyright (c) 1992-2000 The FreeBSD = Project.</FONT> <BR><FONT SIZE=3D2>> Copyright (c) 1979, 1980, 1983, 1986, 1988, = 1989, 1991, 1992, </FONT> <BR><FONT SIZE=3D2>> 1993, 1994</FONT> <BR><FONT SIZE=3D2>> = The Regents of the University of California. All </FONT> <BR><FONT SIZE=3D2>> rights reserved.</FONT> <BR><FONT SIZE=3D2>> FreeBSD 4.2-RELEASE #0: Mon Jul 2 = 14:56:40 IST 2001</FONT> <BR><FONT SIZE=3D2>> = root@glaukos.phaxx.cx:/usr/src/sys/compile/SNDGLAUKOS</FONT> <BR><FONT SIZE=3D2>> Timecounter "i8254" frequency = 1193182 Hz</FONT> <BR><FONT SIZE=3D2>> Timecounter "TSC" frequency = 700031872 Hz</FONT> <BR><FONT SIZE=3D2>> CPU: AMD Duron(tm) Processor (700.03-MHz = 686-class CPU)</FONT> <BR><FONT SIZE=3D2>> Origin =3D = "AuthenticAMD" Id =3D 0x630 Stepping =3D 0</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> = Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR</FON= T> <BR><FONT SIZE=3D2>> ,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR></FONT> <BR><FONT SIZE=3D2>> AMD = Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!></FONT> <BR><FONT SIZE=3D2>> real memory =3D 268369920 (262080K = bytes)</FONT> <BR><FONT SIZE=3D2>> config> di sn0</FONT> <BR><FONT SIZE=3D2>> No such device: sn0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di lnc0</FONT> <BR><FONT SIZE=3D2>> No such device: lnc0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di ie0</FONT> <BR><FONT SIZE=3D2>> No such device: ie0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di fe0</FONT> <BR><FONT SIZE=3D2>> No such device: fe0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di cs0</FONT> <BR><FONT SIZE=3D2>> No such device: cs0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di bt0</FONT> <BR><FONT SIZE=3D2>> No such device: bt0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di aic0</FONT> <BR><FONT SIZE=3D2>> No such device: aic0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di aha0</FONT> <BR><FONT SIZE=3D2>> No such device: aha0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> di adv0</FONT> <BR><FONT SIZE=3D2>> No such device: adv0</FONT> <BR><FONT SIZE=3D2>> Invalid command or syntax. Type `?' for = help.</FONT> <BR><FONT SIZE=3D2>> config> en atkbd0</FONT> <BR><FONT SIZE=3D2>> config> ir atkbd0 1</FONT> <BR><FONT SIZE=3D2>> config> f atkbd0 0x1</FONT> <BR><FONT SIZE=3D2>> config> q</FONT> <BR><FONT SIZE=3D2>> avail memory =3D 258191360 (252140K = bytes)</FONT> <BR><FONT SIZE=3D2>> Preloaded elf kernel "kernel" at = 0xc031a000.</FONT> <BR><FONT SIZE=3D2>> Preloaded userconfig_script = "/boot/kernel.conf" at 0xc031a09c.</FONT> <BR><FONT SIZE=3D2>> Pentium Pro MTRR support enabled</FONT> <BR><FONT SIZE=3D2>> md0: Malloc disk</FONT> <BR><FONT SIZE=3D2>> npx0: <math processor> on = motherboard</FONT> <BR><FONT SIZE=3D2>> npx0: INT 16 interface</FONT> <BR><FONT SIZE=3D2>> pcib0: <Host to PCI bridge> on = motherboard</FONT> <BR><FONT SIZE=3D2>> pci0: <PCI bus> on pcib0</FONT> <BR><FONT SIZE=3D2>> pcib2: <PCI to PCI bridge (vendor=3D1106 = device=3D8305)> at </FONT> <BR><FONT SIZE=3D2>> device 1.0 on pci0</FONT> <BR><FONT SIZE=3D2>> pci1: <PCI bus> on pcib2</FONT> <BR><FONT SIZE=3D2>> pci1: <S3 Savage 4 graphics accelerator> = at 0.0 irq 10</FONT> <BR><FONT SIZE=3D2>> isab0: <VIA 82C686 PCI-ISA bridge> at = device 7.0 on pci0</FONT> <BR><FONT SIZE=3D2>> isa0: <ISA bus> on isab0</FONT> <BR><FONT SIZE=3D2>> atapci0: <VIA 82C686 ATA66 controller> = port 0xe000-0xe00f at </FONT> <BR><FONT SIZE=3D2>> device 7.1 on pci0</FONT> <BR><FONT SIZE=3D2>> ata0: at 0x1f0 irq 14 on atapci0</FONT> <BR><FONT SIZE=3D2>> ata1: at 0x170 irq 15 on atapci0</FONT> <BR><FONT SIZE=3D2>> pci0: <VIA 83C572 USB controller> at 7.2 = irq 11</FONT> <BR><FONT SIZE=3D2>> pci0: <VIA 83C572 USB controller> at 7.3 = irq 11</FONT> <BR><FONT SIZE=3D2>> rl0: <RealTek 8139 10/100BaseTX> port = 0xec00-0xecff mem </FONT> <BR><FONT SIZE=3D2>> 0xdf000000-0xdf0000ff irq 11 at device 11.0 on = pci0</FONT> <BR><FONT SIZE=3D2>> rl0: Ethernet address: 00:a0:d2:13:0b:b0</FONT> <BR><FONT SIZE=3D2>> miibus0: <MII bus> on rl0</FONT> <BR><FONT SIZE=3D2>> rlphy0: <RealTek internal media = interface> on miibus0</FONT> <BR><FONT SIZE=3D2>> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, = 100baseTX-FDX, auto</FONT> <BR><FONT SIZE=3D2>> pcib1: <Host to PCI bridge> on = motherboard</FONT> <BR><FONT SIZE=3D2>> pci2: <PCI bus> on pcib1</FONT> <BR><FONT SIZE=3D2>> isa0: too many dependant configs (8)</FONT> <BR><FONT SIZE=3D2>> fdc0: <NEC 72065B or clone> at port = 0x3f0-0x3f5,0x3f7 irq 6 </FONT> <BR><FONT SIZE=3D2>> drq 2 on isa0</FONT> <BR><FONT SIZE=3D2>> atkbdc0: <Keyboard controller (i8042)> at = port 0x60,0x64 on isa0</FONT> <BR><FONT SIZE=3D2>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on = atkbdc0</FONT> <BR><FONT SIZE=3D2>> kbd0 at atkbd0</FONT> <BR><FONT SIZE=3D2>> psm0: <PS/2 Mouse> irq 12 on = atkbdc0</FONT> <BR><FONT SIZE=3D2>> psm0: model Generic PS/2 mouse, device ID = 0</FONT> <BR><FONT SIZE=3D2>> vga0: <Generic ISA VGA> at port = 0x3c0-0x3df iomem </FONT> <BR><FONT SIZE=3D2>> 0xa0000-0xbffff on isa0</FONT> <BR><FONT SIZE=3D2>> sc0: <System console> at flags 0x100 on = isa0</FONT> <BR><FONT SIZE=3D2>> sc0: VGA <16 virtual consoles, = flags=3D0x300></FONT> <BR><FONT SIZE=3D2>> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on = isa0</FONT> <BR><FONT SIZE=3D2>> sio0: type 16550A</FONT> <BR><FONT SIZE=3D2>> sio1 at port 0x2f8-0x2ff irq 3 on isa0</FONT> <BR><FONT SIZE=3D2>> sio1: type 16550A</FONT> <BR><FONT SIZE=3D2>> ppc0: <Parallel port> at port 0x378-0x37f = irq 7 on isa0</FONT> <BR><FONT SIZE=3D2>> ppc0: Generic chipset (EPP/NIBBLE) in = COMPATIBLE mode</FONT> <BR><FONT SIZE=3D2>> plip0: <PLIP network interface> on = ppbus0</FONT> <BR><FONT SIZE=3D2>> lpt0: <Printer> on ppbus0</FONT> <BR><FONT SIZE=3D2>> lpt0: Interrupt-driven port</FONT> <BR><FONT SIZE=3D2>> ppi0: <Parallel I/O> on ppbus0</FONT> <BR><FONT SIZE=3D2>> sbc1: <Creative SB AWE64 Gold> at port = </FONT> <BR><FONT SIZE=3D2>> 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq = 1,5 on isa0</FONT> <BR><FONT SIZE=3D2>> IP Filter: v3.4.8 initialized. Default = =3D pass all, Logging =3D enabled</FONT> <BR><FONT SIZE=3D2>> ad0: 4120MB <Maxtor 84320D4> [8930/15/63] = at ata0-master UDMA33</FONT> <BR><FONT SIZE=3D2>> acd0: CDROM <FX001DE> at ata1-master = using PIO3</FONT> <BR><FONT SIZE=3D2>> acd1: CDROM <FX322M> at ata1-slave using = PIO4</FONT> <BR><FONT SIZE=3D2>> Mounting root from ufs:/dev/ad0s2a</FONT> <BR><FONT SIZE=3D2>> cd9660: RockRidge Extension</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> end of dmesg output</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> I have made the necessary device nodes with = MAKEDEV snd0 but </FONT> <BR><FONT SIZE=3D2>> I'm given a "Device not configured" = error when I try to use </FONT> <BR><FONT SIZE=3D2>> any of them (audio,dsp,whatever)</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> I would greatly appreciate any help with = this.</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> Thanks!</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> Charlie</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> To Unsubscribe: send mail to = majordomo@FreeBSD.org</FONT> <BR><FONT SIZE=3D2>> with "unsubscribe freebsd-questions" = in the body of the message</FONT> <BR><FONT SIZE=3D2>> </FONT> </P> </BODY> </HTML> ------_=_NextPart_001_01C10309.2BAD6F20-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46AEB8C1B628D511969200508B6FE42A66846A>