Date: Mon, 30 Sep 2002 13:13:14 -0700 (PDT) From: Greg Dossett <ged@nfr.com> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/43539: Cannot mout floppy on Compaq Proliant ML370 Message-ID: <200209302013.g8UKDE2s076688@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 43539 >Category: misc >Synopsis: Cannot mout floppy on Compaq Proliant ML370 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Sep 30 13:20:01 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Greg Dossett >Release: FreeBSD 4.6.2 >Organization: NFR >Environment: FreeBSD 4.6.2-RELEASE #0: Wed Aug 14 21:23:26 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC >Description: FreeBSD 4.6.2 cannot successfully access the floppy device on Compaq Proliant ML370 with the SmartArray 5i RAID controller. After numerous errors while trying to mount the floppy, the system hangs after this last message: "fdc0: too many errors, not logging any more". This is either an fdc and/or ciss device problem. # dmesg Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6.2-RELEASE #0: Wed Aug 14 21:23:26 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1263.45-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1342160896 (1310704K bytes) avail memory = 1300176896 (1269704K bytes) Preloaded elf kernel "kernel" at 0xc04d0000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib1: <ServerWorks host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x3000-0x30ff mem 0xf2cf0000-0xf2cf0fff irq 11 at device 2.0 on pci1 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x3400-0x34ff mem 0xf2ce0000-0xf2ce0fff irq 11 at device 2.1 on pci1 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2000-0x203f mem 0xf2a00000-0xf2af ffff,0xf2bf0000-0xf2bf0fff irq 10 at device 2.0 on pci0 fxp0: Ethernet address 00:08:02:55:b4:97 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <ATI Mach64-GR graphics accelerator> at 5.0 pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 6.0 irq 5 isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2800-0x280f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf0fd0000-0xf0fd0fff irq 15 at devic e 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib2: <ServerWorks host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib7: <ServerWorks host to PCI bridge> on motherboard pci7: <PCI bus> on pcib7 ciss0: <Compaq Smart Array 5300> port 0x4000-0x40ff mem 0xf7e00000-0xf7efffff,0x f7fc0000-0xf7ffffff irq 11 at device 3.0 on pci7 ciss0: using 256 of 1024 available commands ciss0: 1 logical drive configured ciss0: firmware 1.76 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe<simple,performant,MEMQ> ciss0: active I/O method 0x3<simple> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 0 ciss0: max outstanding commands 1024 ciss0: bus types 0x2<ultra3> ciss0: server name '' ciss0: heartbeat 0xf0000029 ciss0: 1 logical drive ciss0: logical drive 0: RAID 1, 16896MB online pci7: <unknown card> (vendor=0x0e11, dev=0xa0f7) at 7.0 irq 10 eisa0: <EISA bus> on motherboard mainboard0: <CPQ071e (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xe e000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata0-slave: ATA identify retries exceeded acd0: CDROM <Compaq CRD-8402B> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 17363MB (35561280 512 byte sectors: 255H 32S/T 4358C) >How-To-Repeat: mount -t msdos /dev/fd0a /mnt >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200209302013.g8UKDE2s076688>