Date: Mon, 16 Sep 2002 09:00:59 -0400 (EDT) From: John Bleichert <syborg@stny.rr.com> To: Kyle Butt <kylebutt@myrealbox.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Enhanced cd's Message-ID: <Pine.LNX.4.44.0209160858310.3510-100000@janeway.vonbek.dhs.org> In-Reply-To: <20020915211820.GA25332@TriGem350.mindspring.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 15 Sep 2002, Kyle Butt wrote: > Date: Sun, 15 Sep 2002 21:18:20 +0000 > From: Kyle Butt <kylebutt@myrealbox.com> > To: freebsd-questions@FreeBSD.ORG > Subject: Enhanced cd's > > Does anyone know how to mount the data partition on > a cd-extra type cd? > > I've grokked through the sources of the cd9660 mount > system and the manpages but I found no answers. > > mount -tcd9660 -o-s0 /dev/acd0t14 /mnt succeeds, > but nothing exists on /mnt. > > Just FYI the cd I'm testing with is Bedlam Ballroom > By the Squirrel Nut Zippers > > I know it's mounting something. If I put a file > in /mnt it disappears when I mount and reappears > when I dismount > > Thanks in advance. > Please cc replies to me. > > The only 'enhanced' CD I own works fine if I just mount the CD: # mount /cdrom (I have it setup in fstab). Mount ignores all the audio and mounts the data section of the disk. I dunno if this is proper or blind luck, but it works with the 'enhanced' version of Iron Maiden's 1st CD. JB > uname -a output > FreeBSD TriGem350.mindspring.com 5.0-CURRENT FreeBSD 5.0-CURRENT #0: > Sat Sep 7 20:39:14 GMT 2002 > kyle@TriGem350:/usr/src/sys/i386/compile/TRIGEM350 i386 > > dmesg output: (with irrelevant lock stuff removed) > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.0-CURRENT #0: Sat Sep 7 20:39:14 GMT 2002 > kyle@TriGem350:/usr/src/sys/i386/compile/TRIGEM350 > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0504000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05040a8. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 350796834 Hz > CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU) > Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > AMD Features=0xffffffff80000800<SYSCALL,3DNow!> > real memory = 134201344 (131056K bytes) > avail memory = 124710912 (121788K bytes) > K6-family MTRR support enabled (2 registers) > VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc0436302 (1000022) > VESA: ATI MACH64 > netsmb_dev: loaded > Using $PIR table, 5 entries at 0xc00f0b40 > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS P5A-B > on motherboard > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-safe" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xec08-0xec0b on acpi0 > acpi_cpu0: <CPU> on acpi0 > pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib1 > agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 > pcib2: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib2 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > pcm0: <AudioPCI ES1370> port 0xb800-0xb83f irq 9 at device 9.0 on pci0 > pci0: <simple comms> at device 10.0 (no driver attached) > rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xde000000-0xde0000ff irq 10 at device 11.0 on pci0 > rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode > rl0: Ethernet address: 00:4f:4e:03:38:9c > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > atapci0: <AcerLabs Aladdin ATA33 controller> port 0xa400-0xa40f at device 15.0 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/7 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry > ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default > IPsec: Initialized Security Association Processing. > IP Filter: v3.4.28 initialized. Default = block all, Logging = enabled > ad0: 5495MB <Maxtor 90576D4> [11166/16/63] at ata0-master UDMA33 > ad1: 9765MB <Maxtor 91024D4> [19841/16/63] at ata0-slave UDMA33 > ad2: 1916MB <Maxtor 72004 A> [3893/16/63] at ata1-slave WDMA2 > acd0: CD-RW <CW078D ATAPI CD-R/RW> at ata1-master PIO4 > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <CyberDrv CW078D CD-R/RW 110E> Removable CD-ROM SCSI-0 device > cd0: 16.000MB/s transfers > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > # John Bleichert # http://vonbek.dhs.org/latest.jpg To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.44.0209160858310.3510-100000>