Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 17 Mar 2008 12:00:44 -0400
From:      John Baldwin <jhb@freebsd.org>
To:        "Poul-Henning Kamp" <phk@phk.freebsd.dk>
Cc:        cvs-src@freebsd.org, src-committers@freebsd.org, cvs-all@freebsd.org
Subject:   Re: cvs commit: src/sys/i386/cpufreq est.c
Message-ID:  <200803171200.45273.jhb@freebsd.org>
In-Reply-To: <3709.1205762533@critter.freebsd.dk>
References:  <3709.1205762533@critter.freebsd.dk>

next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 17 March 2008 10:02:13 am Poul-Henning Kamp wrote:
> In message <200803170933.48212.jhb@freebsd.org>, John Baldwin writes:
> >On Monday 17 March 2008 05:01:43 am Poul-Henning Kamp wrote:
> >> phk         2008-03-17 09:01:43 UTC
> >>
> >>   FreeBSD src repository
> >>
> >>   Modified files:
> >>     sys/i386/cpufreq     est.c
> >>   Log:
> >>   Increase time we wait for things to settle to 1 millisecond,
> >>   10 microseconds is too short.
> >>
> >>   Always set the cpu to the highest frequency so that we get through
> >>   boot and don't handicap cpus where powerd(8) is not used.
> >
> >Hmm, I actually consider this a feature when I'm not running powerd to use 
> >less battery.  I think we should only bump up the CPU on battery power when 
> >using powerd so that it can be lowered again to save battery power when the 
> >CPU is idle.
> 
> We have cpufreq enabled by default now, badly configured machines run
> at 50% of rated CPU power because people don't know that they need to
> enable powerd(8) on servers.
> 
> This is only going to get worse when more EnergyStar compliant servers
> hit the channel.
> 
> I think setting full speed is the correct choice, if people care about
> powersaving, they need to configured it, if they don't they should get
> their moneys worth out of their hardware.

You have servers that default to half-speed when not on battery?  That is very 
odd, but you can just run powerd with '-a max' and it will just set them to 
run full speed on startup which will work fine for you.  I think the vast 
majority of machines that don't run at full speed on startup are machines on 
battery power and that the previous default was a more useful policy.

We don't have any servers at work that have this bizzare behavior (and we have 
a lot of machines at work).

-- 
John Baldwin



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200803171200.45273.jhb>