Date: Wed, 04 Dec 1996 20:19:10 -0500 From: Mike Tancsa <mike@sentex.net> To: wjjr@sapphire (John J. Rushford), questions@freebsd.org Subject: Re: Adaptec 2940 AU on 2.1.5 Message-ID: <1.5.4.32.19961205011910.009b64c8@sentex.net>
next in thread | raw e-mail | index | archive | help
At 05:43 PM 12/04/96 -0700, John J. Rushford wrote: >Hi, > >I've got a pentium equiped as follows and I cannot load FreeBSD 2.1.5, >apparently the Adaptec 2940AU is not recognized so my CDROM is not >found. I thought the 2940 was supported? Any ideas on what I can >do. After downloading a new boot disk and driver update, I can >successfully load Solaris 2.5.1 x86 but, I would prefer FreeBSD. >Apparently even Solaris would not recognize the 2940AU. Should I >find a plain vanilla 2940? I had the same problems... The AU is different from the regular A... If you can, find a plain A version... It works like a champ with 2.1.5. If you can not get one, have a look at 2.1.6. It sort of works with this release, however I had problems with it. On initial boot, it had no problems recognizing the controller and attached drives. However, after a "shutdown -r now" the card would not load the BIOS into the drives and FreeBSD would not boot :-( It might just have been my Fujitsu 4Gig however. Adaptec was fairly helpful. I called their 1-800#, went through the problems with the tech guy and they said they would exchange the card for me with a 2940UW which doest suffer from this problem. However, I could not wait for it to come, so I sent back the 2940U to my distributor and got a vanilla 2940A. ---Mike ********************************************************************** Mike Tancsa (mike@sentex.net) * To do is to be -- Nietzsche Sentex Communications Corp, * To be is to do -- Sartre Waterloo, Ontario * Do be do be do -- Sinatre (http://www.sentex.net/~mdtancsa) *
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1.5.4.32.19961205011910.009b64c8>