Date: Mon, 16 Nov 1998 15:23:18 -0800 From: Eric Hodel <hodeleri@seattleu.edu> To: Kelsey Cummings <kc@neteze.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: trouble making kernel Message-ID: <3650B3E6.A57D2C9@seattleu.edu> References: <005101be118f$bbbd3f50$33f9c9d0@ntworkstation1.neteze.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Try: #make depend #make #make install Eric Hodel hodeleri@seattleu.edu > Kelsey Cummings wrote: > > This is bound to be an easy one- I've done a complete install of 2.2.7 onto a > fresh system, replaced the source tree with the 'current' source tree and then > gone about trying to make a custom kernel. > > I've edited the kernel options- (it won't compile with the generic options > either- same error...) > > > Ater I edit the conf file, I've followed these steps- > > test# /usr/sbin/config IP_DUMMY > test# cd ../../compile/IP_DUMMY > test# make dep > make: don't know how to make dep. Stop > > I don't have a clue. Any pointers on steps I am missing? > > Kelsey Cummings > Sr. Customer Support Rep. > NetEase, Inc. > kc@neteze.com > (707) 569-5000 > (800) 203-1916 > > test# cat IP_DUMMY > # > # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks > # > # For more information read the handbook part System Administration -> > # Configuring the FreeBSD Kernel -> The Configuration File. > # The handbook is available in /usr/share/doc/handbook or online as > # latest version from the FreeBSD World Wide Web server > # <URL:http://www.FreeBSD.ORG/>; > # > # An exhaustive list of options and more detailed explanations of the > # device lines is present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $Id: GENERIC,v 1.131 1998/11/12 11:29:28 obrien Exp $ > > machine "i386" > #cpu "I386_CPU" > #cpu "I486_CPU" > cpu "I586_CPU" > #cpu "I686_CPU" > ident IP_DUMMY > maxusers 40 > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep > this!] > options MFS #Memory Filesystem > options MFS_ROOT #MFS usable as root device, "MFS" > req'ed > #options NFS #Network Filesystem > #options NFS_ROOT #NFS usable as root device, > "NFS" req'ed > #options MSDOSFS #MSDOS Filesystem > options "CD9660" #ISO 9660 Filesystem > options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" > req'ed > options PROCFS #Process filesystem > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device > options UCONSOLE #Allow users to grab the console > options FAILSAFE #Be conservative > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > > config kernel root on wd0 > > controller isa0 > controller eisa0 > controller pci0 > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 > disk fd0 at fdc0 drive 0 > #disk fd1 at fdc0 drive 1 > # Unless you know very well what you're doing, leave ft0 at drive 2, or > # remove the line entirely if you don't need it. Trying to configure > # it on another unit might cause surprises, see PR kern/7176. > #tape ft0 at fdc0 drive 2 > > #options "CMD640" # work around CMD640 chip deficiency > controller wdc0 at isa? port "IO_WD1" bio irq 14 > disk wd0 at wdc0 drive 0 > disk wd1 at wdc0 drive 1 > > controller wdc1 at isa? port "IO_WD2" bio irq 15 > disk wd2 at wdc1 drive 0 > disk wd3 at wdc1 drive 1 > > options ATAPI #Enable ATAPI support for IDE bus > options ATAPI_STATIC #Don't do it as an LKM > device wcd0 #IDE CD-ROM > #device wfd0 #IDE Floppy (e.g. LS-120) > > # A single entry for any of these controllers (ncr, ahb, ahc) is > # sufficient for any number of installed devices. > #controller ncr0 > #controller ahb0 > #controller ahc0 > #controller isp0 > > # This controller offers a number of configuration options, too many to > # document here - see the LINT file in this directory and look up the > # dpt0 entry there for much fuller documentation on this. > #controller dpt0 > > #controller adv0 at isa? port ? cam irq ? > #controller adw0 > #controller bt0 at isa? port ? cam irq ? > #controller aha0 at isa? port ? cam irq ? > #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 > #controller aic0 at isa? port 0x340 bio irq 11 > > #controller scbus0 > > #device da0 > > #device sa0 > > #device pass0 > > #device cd0 #Only need one of these, the code dynamically grows > > #device wt0 at isa? port 0x300 bio irq 5 drq 1 > #device mcd0 at isa? port 0x300 bio irq 10 > > #controller matcd0 at isa? port 0x230 bio > > #device scd0 at isa? port 0x230 bio > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? port IO_KBD conflicts tty irq 1 > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? port IO_KBD conflicts tty irq 1 > #options XSERVER # support for X server > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > device npx0 at isa? port IO_NPX irq 13 > > # > # Laptop support (see LINT for more options) > # > #device apm0 at isa? disable flags 0x31 # Advanced Power Management > > # PCCARD (PCMCIA) support > #controller card0 > #device pcic0 at card? > #device pcic1 at card? > > device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 > device sio1 at isa? port "IO_COM2" tty irq 3 > #device sio2 at isa? disable port "IO_COM3" tty irq 5 > #device sio3 at isa? disable port "IO_COM4" tty irq 9 > > device lpt0 at isa? port? tty irq 7 > > #device psm0 at isa? port IO_KBD conflicts tty irq 12 > > # Order is important here due to intrusive probes, do *not* alphabetize > # this list of network interfaces until the probes have been fixed. > # Right now it appears that the ie0 must be probed before ep0. See > # revision 1.20 of this file. > device de0 > #device fxp0 > #device rl0 > #device tl0 > #device tx0 > #device vx0 > #device xl0 > > #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 > #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 > #device ep0 at isa? port 0x300 net irq 10 > #device ex0 at isa? port? net irq? > #device fe0 at isa? port 0x300 net irq ? > #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 > #device lnc0 at isa? port 0x280 net irq 10 drq 0 > #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 > #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 > #device cs0 at isa? port 0x300 net irq ? > > pseudo-device loop > pseudo-device ether > pseudo-device sl 1 > pseudo-device ppp 1 > pseudo-device tun 1 > pseudo-device pty 16 > pseudo-device gzip # Exec gzipped a.out's > > # KTRACE enables the system-call tracing facility ktrace(2). > # This adds 4 KB bloat to your kernel, and slightly increases > # the costs of each syscall. > options KTRACE #kernel tracing > > # This provides support for System V shared memory. > # > options SYSVSHM > > # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be > # aware of the legal and administrative consequences of enabling this > # option. The number of devices determines the maximum number of > # simultaneous BPF clients programs runnable. > #pseudo-device bpfilter 4 #Berkeley packet filter > # This should enable the ipfirewall and dummynet for bandwdith limiting the > # box > > options IPFIREWALL > options DUMMYNET To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3650B3E6.A57D2C9>