Date: Sat, 25 Sep 1999 08:08:04 -0400 From: Rick Knebel <rknebel@uplink.net> To: scsi@freebsd.org Subject: scanner and scsi Message-ID: <19990925080804.C5411@rknebel.uplink.net>
next in thread | raw e-mail | index | archive | help
Hi, I seem to be having trouble with my scsi scanner. I have two scsi cards. A ultra2scsi symbious card and a adaptec card. The symbious card is on scbus 0 and the adaptec card is on scbus 1. I have both scbus0 and scbus4 in my kernel. Here is an exert from my dmesg ncr0: <ncr 53c895 fast40 wide scsi> rev 0x01 int a irq 9 on pci0.10.0 ahc0: <Adaptec 2910/15/20/30C SCSI adapter> rev 0x03 int a irq 10 on pci0.11.0 ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs Probing for devices on PCI bus 1: vga0: <VGA-compatible display device> rev 0x11 int a irq 11 on pci1.0.0 Probing for PnP devices: CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x1b940231 Comp ID: PNPb02f [0x2fb0 d041] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 at 0x3e8-0x3ef irq 4 on isa sio2: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <Seagate STT20000A/8.39>, removable, accel, dma, iordis wdc1: ATAPI streaming tapes not configured wdc1: unit 1 (atapi): <TOSHIBA DVD-ROM SD-M1202/1020>, removable, accel, dma, io rdis acd0: drive speed 5512KB/sec, 256KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked wt0 not found at 0x300 mcd0 not found at 0x300 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Waiting 15 seconds for SCSI devices to settle pass4 at ahc0 bus 0 target 0 lun 0 pass4: <UMAX Astra 1220S V1.2> Fixed Scanner SCSI-2 device pass4: 3.300MB/s transfers changing root device to da1s1a cd0 at ncr0 bus 0 target 6 lun 0 cd0: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device cd0: 8.333MB/s transfers (8.333MHz, offset 31) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c losed da2 at ncr0 bus 0 target 2 lun 0 da2: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da0 at ncr0 bus 0 target 0 lun 0 da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) da1 at ncr0 bus 0 target 1 lun 0 da1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) p Here is the camcontrol devlist -v scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) scbus0 on ncr0 bus 0: <IBM DNES-309170W SA30> at scbus0 target 0 lun 0 (pass0,da0) <IBM DNES-309170W SA30> at scbus0 target 1 lun 0 (pass1,da1) <IOMEGA ZIP 100 J.03> at scbus0 target 2 lun 0 (pass2,da2) <YAMAHA CRW4416S 1.0g> at scbus0 target 6 lun 0 (pass3,cd0) < > at scbus0 target -1 lun -1 () scbus1 on ahc0 bus 0: <UMAX Astra 1220S V1.2> at scbus1 target 0 lun 0 (pass4) < > at scbus1 target -1 lun -1 () My problem is the scanner on bootup is listed as pass 4 but there is no pass4 in the /dev directory. I have tried to make it but if I do ./MAKEDEV pass4 only pass 0-3 are made. I am not a real advanced user so if somone could help I would appreciate it. Thanks Rick -- Rick Knebel rknebel@uplink.net http://rknebel.uplink.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990925080804.C5411>