Date: Tue, 22 Jul 2003 16:42:50 +0400 From: "Sergey A. Osokin" <osa@FreeBSD.org> To: Lawrence Farr <bsd-current@epcdirect.co.uk> Cc: current@freebsd.org Subject: Re: Adaptec AIC7902 Ultra320 Problems Message-ID: <20030722124249.GN1413@freebsd.org.ru> In-Reply-To: <000001c3504c$0883fc70$c806a8c0@lfarr> References: <20030721222407.GA76150@terra.milkyway.stdio.com> <000001c3504c$0883fc70$c806a8c0@lfarr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jul 22, 2003 at 01:23:18PM +0100, Lawrence Farr wrote: > I have a Supermicro SuperServer 6013P-8, with: > > ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x4000-0x40ff,0x4400-0x44ff mem 0xfc300000-0xfc301fff irq 5 at device 2.0 on > pci3 > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs > ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc302000-0xfc303fff irq 5 at device 2.1 on > pci3 > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs > > Trying to install 5.1-CURRENT-20030709-JPSNAP or 4.8-STABLE on the > box gives a timeout error that will hang the disk in a state that > resetting the machine does not clear, and only power cycling will > clear. Ive replaced the disks with no change, but installed and > ran Redhat 7.3 on the box with no timeouts or errors. > > The full dmesg is here: > http://aticatac.epcdirect.co.uk/~l.farr/6013P8_dmesg.txt > > And timeout is here: > http://aticatac.epcdirect.co.uk/~l.farr/AIC7902_timeout.txt Try to switch your adapter from Ultra320 to Ultra160 mode, then try to install again. -- Rgdz, /"\ ASCII RIBBON CAMPAIGN Sergey Osokin aka oZZ, \ / AGAINST HTML MAIL http://ozz.pp.ru/ X AND NEWS / \
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030722124249.GN1413>