Date: Wed, 12 Sep 2001 15:59:01 -0400 From: Gabriel Rocha <grocha@geeksimplex.org> To: stable@FreeBSD.ORG Cc: ports@freebsd.org Subject: Virtual timer expired Message-ID: <20010912155901.O1121@geeksimplex.org>
next in thread | raw e-mail | index | archive | help
I am having problems using vlc /usr/ports/graphics/vlc version 0.2.83 in
latest stable. It worked fine under -current, but I have since changed
this laptop down to -stable, latest, as of a few minutes ago, but I have
been having the problem for a few weeks now with -stable. vlc starts,
open the dvd then exits with the error message:
me@lurch:~$ vlc -A esd -V xvideo dvd:/dev/acd0c
warning: extended instructions unsupported, some optimizations
will be disabled
VideoLAN Client - version 0.2.83 Ourumov - (C)1996-2001 VideoLAN
Virtual timer expired
I am adding dmesg and kernel config...any ideas welcome. Thanks. --gabe
dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #14: Tue Sep 11 23:29:34 PDT 2001
root@lurch.neutraldomain.org:/usr/src/sys/compile/lurch
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.97-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
avail memory = 519565312 (507388K bytes)
Preloaded elf kernel "kernel" at 0xc031e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031e09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdee0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
pcic0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 10 at device 2.1 on pci0
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
xl0: <3Com 3c556B Fast Etherlink XL> port 0x1800-0x18ff mem 0xe8101000-0xe810107f,0xe8101400-0xe810147f irq 9 at device 3.0 on pci0
xl0: Ethernet address: 00:01:03:84:ae:81
miibus0: <MII bus> on xl0
acphy0: <AC101 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x10b7, dev=0x1007) at 3.1 irq 9
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe8000000-0xe80fffff,0xe8100000-0xe8100fff irq 11 at device 5.0 on pci0
csa: card is Thinkpad 600X/A20/T20
pcm0: <CS461x PCM Audio> on csa0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1c00-0x1c0f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 7
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcc7ff,0xe0000-0xeffff,0xf2000-0x1007ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x2f8-0x2ff irq 3 on isa0
sio0: type 16550A
pcic0: BAD Vcc request
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 250 packets/entry by default
DUMMYNET initialized (010124)
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2302> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1c20-0x1c3f irq 7 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 11 slot 0 on pccard0
wi0: Ethernet address: 00:05:5d:f1:1a:46
kernel config:
machine i386
cpu I686_CPU
ident lurch
maxusers 32
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options USER_LDT #allow user-level control of i386 ldt
options QUOTA
#options NMBCLUSTERS=16384 #Greg's version
options DUMMYNET
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
options ICMP_BANDLIM #Rate limit bad replies
# RANDOM_IP_ID causes the ID field in IP packets to be randomized
# instead of incremented by 1 with each packet generated. This
# option closes a minor information leak which allows remote
# observers to determine the rate of packet generation on the
# machine by watching the counter.
options RANDOM_IP_ID
#Firewall stuff --gabe
options IPFILTER #ipfilter support
options IPFILTER_LOG #ipfilter logging
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about
options IPFIREWALL_VERBOSE_LIMIT=250 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 # Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 7 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
#device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio0 at isa? port IO_COM2 irq 3
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# PRISM I IEEE 802.11b wireless NIC.
device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gzip #Exec gzipped a.out's
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
device pcm
device csa
device ep
device ed
# This allows you to actually store this configuration file into
# the kernel binary itself, where it may be later read by saying:
# strings -n 3 /kernel | sed -n 's/^___//p' > MYKERNEL
#
options INCLUDE_CONFIG_FILE # Include this file in kernel
--
"It's not brave if you're not scared."
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010912155901.O1121>