Date: Wed, 7 Nov 2007 22:17:40 +0100 From: Marc Fonvieille <marc@blackend.org> To: acpi@freebsd.org Subject: Random power off under 7-BETA2 Message-ID: <20071107211740.GA1038@gothic.blackend.org>
next in thread | raw e-mail | index | archive | help
Hello,
With RELENG_7, the command "halt -p" sometimes (hardly in fact) turn off
the power, most of time I have to turn off the machine by myself.
On the same machine and with RELENG_6, "halt -p" never fails in turning
off the power.
The machine is UP, here's the kernel config file:
include GENERIC
ident GOTHIC
nooptions SCHED_4BSD
options SCHED_ULE
nooptions SMP
nodevice apic
% sysctl -a | grep acpi
debug.acpi.suspend_bounce: 0
debug.acpi.do_powerstate: 1
debug.acpi.acpi_ca_version: 20070320
debug.acpi.ec.timeout: 750
debug.acpi.ec.polled: 0
debug.acpi.ec.burst: 0
debug.acpi.semaphore_debug: 0
debug.acpi.resume_beep: 0
hw.acpi.supported_sleep_state: S1 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1009920
dev.acpi.0.%desc: ASUS A7V-133
dev.acpi.0.%driver: acpi
dev.acpi.0.%parent: nexus0
dev.acpi_sysresource.0.%desc: System Resource
dev.acpi_sysresource.0.%driver: acpi_sysresource
dev.acpi_sysresource.0.%location: handle=\_SB_.MEM1
dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0
dev.acpi_sysresource.0.%parent: acpi0
dev.acpi_sysresource.1.%desc: System Resource
dev.acpi_sysresource.1.%driver: acpi_sysresource
dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.PX40.SYS1
dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=1
dev.acpi_sysresource.1.%parent: acpi0
dev.acpi_sysresource.2.%desc: System Resource
dev.acpi_sysresource.2.%driver: acpi_sysresource
dev.acpi_sysresource.2.%location: handle=\_SB_.PCI0.PX40.SYS2
dev.acpi_sysresource.2.%pnpinfo: _HID=PNP0C02 _UID=2
dev.acpi_sysresource.2.%parent: acpi0
dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz
dev.acpi_timer.0.%driver: acpi_timer
dev.acpi_timer.0.%location: unknown
dev.acpi_timer.0.%pnpinfo: unknown
dev.acpi_timer.0.%parent: acpi0
dev.pci_link.0.%parent: acpi0
dev.pci_link.1.%parent: acpi0
dev.pci_link.2.%parent: acpi0
dev.pci_link.3.%parent: acpi0
dev.cpu.0.%parent: acpi0
dev.acpi_throttle.0.%desc: ACPI CPU Throttling
dev.acpi_throttle.0.%driver: acpi_throttle
dev.acpi_throttle.0.%parent: cpu0
dev.acpi_throttle.0.freq_settings: 10000/-1 9375/-1 8750/-1 8125/-1 7500/-1 6875/-1 6250/-1 5625/-1 5000/-1 4375/-1 3750/-1 3125/-1 2500/-1 1875/-1 1250/-1 625/-1
dev.acpi_button.0.%desc: Power Button
dev.acpi_button.0.%driver: acpi_button
dev.acpi_button.0.%location: handle=\_SB_.PWRB
dev.acpi_button.0.%pnpinfo: _HID=PNP0C0C _UID=0
dev.acpi_button.0.%parent: acpi0
dev.acpi_button.0.wake: 1
dev.pcib.0.%parent: acpi0
dev.atpic.0.%parent: acpi0
dev.atdma.0.%parent: acpi0
dev.attimer.0.%parent: acpi0
dev.attimer.1.%parent: acpi0
dev.npxisa.0.%parent: acpi0
dev.fdc.0.%parent: acpi0
dev.sio.0.%parent: acpi0
dev.sio.1.%parent: acpi0
dev.atkbdc.0.%parent: acpi0
Here's verbose dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA2 #12: Wed Nov 7 17:26:48 CET 2007
marc@gothic.blackend.org:/usr/obj/usr/src/sys/GOTHIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc127c000.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc127c174.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc127c224.
Preloaded elf module "/boot/kernel/cd9660_iconv.ko" at 0xc127c2d0.
Preloaded elf module "/boot/kernel/libiconv.ko" at 0xc127c384.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc127c434.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc127c4e0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc127c58c.
Calibrating clock(s) ... i8254 clock: 1193169 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1206171805 Hz
CPU: AMD Athlon(tm) Processor (1206.17-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1073659904 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001425000 - 0x000000003eda3fff, 1033367552 bytes (252287 pages)
avail memory = 1033068544 (985 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0f50 (c00f0f50) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x1150
pnpbios: Found PnP BIOS data at 0xc00fc2b0
pnpbios: Entry = f0000:c2e0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ULE: setup cpu 0
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Nov 7 2007 17:26:07)
ACPI: RSDP @ 0x0xf6900/0x0014 (v 0 ASUS )
ACPI: RSDT @ 0x0x3ffec000/0x002C (v 1 ASUS A7V-133 0x30303031 MSFT 0x31313031)
ACPI: FACP @ 0x0x3ffec080/0x0074 (v 1 ASUS A7V-133 0x30303031 MSFT 0x31313031)
ACPI: DSDT @ 0x0x3ffec100/0x2C2B (v 1 ASUS A7V-133 0x00001000 MSFT 0x0100000B)
ACPI: FACS @ 0x0x3ffff000/0x0040
ACPI: BOOT @ 0x0x3ffec040/0x0028 (v 1 ASUS A7V-133 0x30303031 MSFT 0x31313031)
npx0: INT 16 interface
acpi0: <ASUS A7V-133> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd8274000 pa 0x1000
atpic: Programming IRQ9 as level/low
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 4 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.MFEN -> bus 0 dev 4 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.IOCG -> bus 0 dev 4 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
ACPI timer: 0/4 0/5 0/6 1/1 0/5 0/4 0/4 0/4 0/5 0/4 -> 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0xe410
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.12.INTA at func 0: 11
ACPI: Found matching pin for 0.11.INTA at func 0: 15
ACPI: Found matching pin for 0.10.INTA at func 0: 10
ACPI: Found matching pin for 0.10.INTC at func 2: 11
ACPI: Found matching pin for 0.9.INTA at func 0: 5
ACPI: Found matching pin for 0.13.INTA at func 0: 5
ACPI: Found matching pin for 0.17.INTA at func 0: 15
ACPI: Found matching pin for 0.4.INTD at func 2: 5
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1106, dev=0x0305, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe6000000, size 25, enabled
found-> vendor=0x1106, dev=0x8305, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D3 current D0
found-> vendor=0x1106, dev=0x0686, revid=0x40
domain=0, bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
domain=0, bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd800, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
domain=0, bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
pcib0: matched entry for 0.4.INTD (src \\_SB_.LNKD:0)
pcib0: slot 4 INTD routed to irq 5 via \\_SB_.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x16
domain=0, bus=0, slot=4, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled
pcib0: matched entry for 0.4.INTD (src \\_SB_.LNKD:0)
pcib0: slot 4 INTD routed to irq 5 via \\_SB_.LNKD
found-> vendor=0x1106, dev=0x3057, revid=0x40
domain=0, bus=0, slot=4, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1000, dev=0x000f, revid=0x26
domain=0, bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xa400, size 8, enabled
map[14]: type Memory, range 32, base 0xd5800000, size 8, enabled
map[18]: type Memory, range 32, base 0xd5000000, size 12, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.LNKD:0)
pcib0: slot 9 INTA routed to irq 5 via \\_SB_.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x62
domain=0, bus=0, slot=10, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type I/O Port, range 32, base 0xa000, size 5, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.LNKC:0)
pcib0: slot 10 INTA routed to irq 10 via \\_SB_.LNKC
found-> vendor=0x1106, dev=0x3104, revid=0x65
domain=0, bus=0, slot=10, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd4800000, size 8, enabled
pcib0: matched entry for 0.10.INTC (src \\_SB_.LNKA:0)
pcib0: slot 10 INTC routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x11ad, dev=0x0002, revid=0x20
domain=0, bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
map[10]: type I/O Port, range 32, base 0x9800, size 8, enabled
map[14]: type Memory, range 32, base 0xd4000000, size 8, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKB:0)
pcib0: slot 11 INTA routed to irq 15 via \\_SB_.LNKB
found-> vendor=0x11ad, dev=0x0002, revid=0x20
domain=0, bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type I/O Port, range 32, base 0x9400, size 8, enabled
map[14]: type Memory, range 32, base 0xd3800000, size 8, enabled
pcib0: matched entry for 0.12.INTA (src \\_SB_.LNKA:0)
pcib0: slot 12 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1274, dev=0x5880, revid=0x02
domain=0, bus=0, slot=13, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x9000, size 6, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKD:0)
pcib0: slot 13 INTA routed to irq 5 via \\_SB_.LNKD
found-> vendor=0x105a, dev=0x0d30, revid=0x02
domain=0, bus=0, slot=17, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 1 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x8800, size 3, enabled
map[14]: type I/O Port, range 32, base 0x8400, size 2, enabled
map[18]: type I/O Port, range 32, base 0x8000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x7800, size 2, enabled
map[20]: type I/O Port, range 32, base 0x7400, size 6, enabled
map[24]: type Memory, range 32, base 0xd3000000, size 17, enabled
pcib0: matched entry for 0.17.INTA (src \\_SB_.LNKB:0)
pcib0: slot 17 INTA routed to irq 15 via \\_SB_.LNKB
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xd6000000-0xd7dfffff
pcib1: prefetched decode 0xd7f00000-0xe5ffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0111, revid=0xb2
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd6000000, size 24, enabled
pcib1: requested memory range 0xd6000000-0xd6ffffff: good
map[14]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled
pcib1: requested memory range 0xd8000000-0xdfffffff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKA:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKA
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce2 MX 100/200> mem 0xd6000000-0xd6ffffff,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xd6000000
nvidia0: Reserved 0x8000000 bytes for rid 0x14 type 3 at 0xd8000000
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 4.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd800
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
sym0: <875> port 0xa400-0xa4ff mem 0xd5800000-0xd58000ff,0xd5000000-0xd5000fff irq 5 at device 9.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xd5800000
sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd5000000
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: [GIANT-LOCKED]
sym0: [ITHREAD]
uhci2: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 10 at device 10.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa000
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd4800000-0xd48000ff irq 11 at device 10.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xd4800000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb3: EHCI version 1.0
usb3: companion controller, 2 ports each: usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
dc0: <82c169 PNIC 10/100BaseTX> port 0x9800-0x98ff mem 0xd4000000-0xd40000ff irq 15 at device 11.0 on pci0
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9800
miibus0: <MII bus> on dc0
bmtphy0: <BCM5201 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:a0:cc:da:b3:ec
dc0: [MPSAFE]
dc0: [ITHREAD]
dc1: <82c169 PNIC 10/100BaseTX> port 0x9400-0x94ff mem 0xd3800000-0xd38000ff irq 11 at device 12.0 on pci0
dc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9400
miibus1: <MII bus> on dc1
bmtphy1: <BCM5201 10/100baseTX PHY> PHY 1 on miibus1
bmtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: bpf attached
dc1: Ethernet address: 00:a0:cc:da:a2:2c
dc1: [MPSAFE]
dc1: [ITHREAD]
pcm0: <Creative CT5880-C> port 0x9000-0x903f irq 5 at device 13.0 on pci0
pcm0: Reserved 0x40 bytes for rid 0x10 type 4 at 0x9000
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 18f2000, 1000; 0xc4479000 -> 18f2000
pcm0: sndbuf_setmap 18f4000, 1000; 0xc447b000 -> 18f4000
pcm0: sndbuf_setmap 18f6000, 1000; 0xc447d000 -> 18f6000
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
atapci1: <Promise PDC20265 UDMA100 controller> port 0x8800-0x8807,0x8400-0x8403,0x8000-0x8007,0x7800-0x7803,0x7400-0x743f mem 0xd3000000-0xd301ffff irq 15 at device 17.0 on pci0
atapci1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x7400
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8800
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8400
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8000
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x7800
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: irq maps: 0x801 0x809 0x801 0x801
sio1: irq maps: 0x801 0x809 0x801 0x801
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd5fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub0
ums0: 3 buttons and Z dir.
uhub4: <vendor 0x05e3 USB Hub, class 9/0, rev 1.10/3.04, addr 2> on uhub2
uhub4: 4 ports with 4 removable, self powered
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1206171805 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
acd0: setting PIO4 on 82C686B chip
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: setting UDMA33 on 82C686B chip
acd0: <DVD-RW IDE1008/VER 0059> DVDR drive at ata0 as master
acd0: read 171KB/s (6876KB/s) write 6890KB/s (6876KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad4: setting PIO4 on PDC20265 chip
ad4: setting UDMA100 on PDC20265 chip
ad4: 76319MB <Seagate ST3802110A 3.AAJ> at ata2-master UDMA100
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Promise check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
GEOM: new disk ad4
pass0 at sym0 bus 0 target 3 lun 0
pass0: <PLEXTOR CD-ROM PX-40TS 1.00> Removable CD-ROM SCSI-2 device
pass0: Serial Number 3
pass0: 20.000MB/s transfers (20.000MHz, offset 15)
GEOM: new disk cd0
ATA PseudoRAID loaded
(cd0:sym0:0:3:0): Retrying Command
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
cd0 at sym0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.00> Removable CD-ROM SCSI-2 device
cd0: Serial Number 3
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
Trying to mount root from ufs:/dev/ad4s2a
start_init: trying /sbin/init
dc0: dc_setcfg: failed to force tx to idle state
dc0: dc_setcfg: failed to force tx to idle state
--
Marc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071107211740.GA1038>