Date: Mon, 14 May 2001 13:28:21 -0500 From: "Jason Halbert" <jason@jason-n3xt.org> To: <questions@freebsd.org> Subject: Re: make buildkernel fails Message-ID: <FLEHIKBMHCFFLAFKKDAJMEPJCEAA.jason@jason-n3xt.org>
next in thread | raw e-mail | index | archive | help
I, just out of curiosity, upgraded my P200 SMP machine that was installed with the very same disc my K6-2 450 used. I went from beginning to end without a hitch. Mind you it took a whole day, but it worked. I just can't seem to figure out why my faster machine is saying "bleh" (figuratively) when I try to upgrade it. Maybe this is the computer gods way of saying get a new computer. --- Jason jason@jason-n3xt.org -----Original Message----- From: Jeff Kolp [mailto:linux@icpn.com] Sent: Sunday, May 13, 2001 11:03 AM To: Jason Halbert Subject: Re: make buildkernel fails Hmmm, Did you start at beginning after you corrected overclocking problem. I had same thing come up and I had to start over to make it work. I tried to pick up at the buildworld step only find out it didn't work. Jk ----- Original Message ----- From: "Jason Halbert" <jason@jason-n3xt.org> To: "Jeff Kolp" <linux@icpn.com> Sent: Sunday, May 13, 2001 11:19 AM Subject: RE: make buildkernel fails > Everything to my knowledge is set correctly. I checked over everything when > I noticed the processor was over clocked and I was having other problems. > > I'll check again. > > --- > Jason > > -----Original Message----- > From: Jeff Kolp [mailto:linux@icpn.com] > Sent: Sunday, May 13, 2001 9:49 AM > To: Jason Halbert > Subject: Re: make buildkernel fails > > > Error code one usually means a hardware problem > > Is your clock speed and pci clock speed set right. Is your memory set right > in bios. Check all bios setting, if you have cache enabled for system and > video disable. All those tweaks bsd don't like while install, I think you > can set them back to tweaked after the fact. > > hope you find it, > > Jk > ----- Original Message ----- > From: "Jason Halbert" <jason@jason-n3xt.org> > To: <questions@FreeBSD.ORG> > Sent: Sunday, May 13, 2001 10:38 AM > Subject: make buildkernel fails > > > > Hi Everyone: > > > > I found the problem with the buildworld crashing. My board was over > clocked > > and I had forgotten about it. Now the next step in upgrading "make > > buildkernel" is having some problems. This is what I get when it stops. > > > > --- > > /usr/src/sys/dev/mii/inphy.c: In function `inphy_probe': > > /usr/src/sys/dev/mii/inphy.c:91: `MII_OUI_xxINTEL' undeclared (first use > in > > this function) > > /usr/src/sys/dev/mii/inphy.c:91: (Each undeclared identifier is reported > > only once > > /usr/src/sys/dev/mii/inphy.c:91: for each function it appears in.) > > /usr/src/sys/dev/mii/inphy.c:92: `MII_MODEL_xxINTEL_I82553AB' undeclared > > (first use in this function) > > /usr/src/sys/dev/mii/inphy.c:93: `MII_STR_xxINTEL_I82553AB' undeclared > > (first use in this function) > > /usr/src/sys/dev/mii/inphy.c:102: `MII_MODEL_INTEL_I82553C' undeclared > > (first use in this function) > > /usr/src/sys/dev/mii/inphy.c:103: `MII_STR_INTEL_I82553C' undeclared > (first > > use in this function) > > /usr/src/sys/dev/mii/inphy.c:105: `MII_MODEL_INTEL_I82562EM' undeclared > > (first use in this function) > > /usr/src/sys/dev/mii/inphy.c:106: `MII_STR_INTEL_I82562EM' undeclared > (first > > use in this function) > > /usr/src/sys/dev/mii/inphy.c:108: `MII_MODEL_INTEL_I82562ET' undeclared > > (first use in this function) > > /usr/src/sys/dev/mii/inphy.c:109: `MII_STR_INTEL_I82562ET' undeclared > (first > > use in this function) > > *** Error code 1 > > > > Stop in /usr/obj/usr/src/sys/N3XT. > > *** Error code 1 > > > > Stop in /usr/src. > > *** Error code 1 > > > > Stop in /usr/src. > > --- > > > > This is a custom kernel config, but I tried it on just the unchanged > GENERIC > > config and I get the same thing. I'm in the process of upgrading from > > 4.2-RELEASE to 4.X-STABLE. Anyone have an idea? > > > > Thanks IA > > > > Jason Halbert > > jason@jason-n3xt.org > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FLEHIKBMHCFFLAFKKDAJMEPJCEAA.jason>