Date: Tue, 13 Sep 2005 08:02:12 -0700 (PDT) From: Thede Loder <thede@loder.com> To: freebsd-bugs@freebsd.org Subject: ATA Errors: Promise SATA TX2plus controller and NFS Message-ID: <Pine.OSX.4.62.0509130749550.2896@mini01.loder.com>
next in thread | raw e-mail | index | archive | help
Hi - I'm using a Promise PDC20575 SATA150 controller with 6.0-BETA4 and am getting the following errors: ad4: FAILURE - SETFEATURES SET TRANSFER MODE timed out ad4: req=0xc2d0a0c8 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !! ad4: req=0xc2d0a0c8 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !! ... ad4: req=0xc2d0a0c8 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !! A new line gets added about every 3-4 seconds. My setup: a filesystem on the drive is exported via NFS. This error occurs when the client machine (Mac OS X) is writing to the filesystem while doing an import of many music files (driven by iTunes). The import process usually runs about a minute before the first error occurs, then the second error message (with our friend Will Robinson...) begins to appear. The occurence of the first error kills the NFS mount and aborts any writes. Any ideas? The dmesg output from boot is below. Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA4 #0: Tue Sep 13 07:07:40 PDT 2005 root@davros.loder.com:/usr/obj/usr/src/sys/DAVROS Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 1800+ (1533.40-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> real memory = 1342177280 (1280 MB) avail memory = 1305546752 (1245 MB) MPTable: <VIA VT5440B > ioapic0: Assuming intbase of 0 ioapic0 <Version 0.3> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA 8367 (KT266/KY266x/KT333) host to PCI bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0 pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) atapci0: <Promise PDC20575 SATA150 controller> port 0xec00-0xec7f,0xe800-0xe8ff mem 0xdffff000-0xdfffffff,0xdffc0000-0xdffdffff irq 16 at device 5.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xe400-0xe4ff mem 0xdfffef00-0xdfffefff irq 17 at device 6.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:05:5d:32:83:a4 dc0: <ADMtek AN985 10/100BaseTX> port 0xe000-0xe0ff mem 0xdfffe800-0xdfffebff irq 18 at device 7.0 on pci0 miibus1: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:50:bf:96:fd:d2 pcm0: <Creative CT5880-C> port 0xdc00-0xdc3f irq 19 at device 8.0 on pci0 pcm0: <SigmaTel STAC9721/23 AC97 Codec> pcm0: [GIANT-LOCKED] uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 16.3 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 17.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) Timecounter "TSC" frequency 1533398646 Hz quality 800 Timecounters tick every 1.000 msec IPv6 packet filtering initialized, logging limited to 16 packets/entry ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging limited to 16 packets/entry by default ad0: 76319MB <WDC WD800JB-00JJA0 05.01C05> at ata0-master UDMA100 ad1: 38182MB <MAXTOR 4K040H2 A08.1500> at ata0-slave UDMA100 acd0: CDROM <ATAPI 48X CDROM/VER-3.10> at ata1-master UDMA33 ad4: 238475MB <WDC WD2500JD-50GBB0 02.05D02> at ata2-master SATA150 ad6: 238475MB <Seagate ST3250823AS 3.01> at ata3-master SATA150 Trying to mount root from ufs:/dev/ad0s1a Thede -- E: thede@loder.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSX.4.62.0509130749550.2896>