Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 8 Dec 2009 17:54:23 +0000 (UTC)
From:      Pyun YongHyeon <yongari@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r200264 - head/sys/dev/bge
Message-ID:  <200912081754.nB8HsNCF095021@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: yongari
Date: Tue Dec  8 17:54:23 2009
New Revision: 200264
URL: http://svn.freebsd.org/changeset/base/200264

Log:
  Create sysctl node(dev.bge.%d.focred_collapse) instead of
  hw.bge.forced_collapse. hw.bge.forced_collapse affects all bge(4)
  controllers on system which may not desirable behavior of the
  sysctl node. Also allow the sysctl node could be modified at any
  time.
  
  Reviewed by:	bde (initial version)

Modified:
  head/sys/dev/bge/if_bge.c
  head/sys/dev/bge/if_bgereg.h

Modified: head/sys/dev/bge/if_bge.c
==============================================================================
--- head/sys/dev/bge/if_bge.c	Tue Dec  8 15:29:12 2009	(r200263)
+++ head/sys/dev/bge/if_bge.c	Tue Dec  8 17:54:23 2009	(r200264)
@@ -483,29 +483,12 @@ DRIVER_MODULE(bge, pci, bge_driver, bge_
 DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0);
 
 static int bge_allow_asf = 1;
-/*
- * A common design characteristic for many Broadcom client controllers
- * is that they only support a single outstanding DMA read operation
- * on the PCIe bus. This means that it will take twice as long to fetch
- * a TX frame that is split into header and payload buffers as it does
- * to fetch a single, contiguous TX frame (2 reads vs. 1 read). For
- * these controllers, coalescing buffers to reduce the number of memory
- * reads is effective way to get maximum performance(about 940Mbps).
- * Without collapsing TX buffers the maximum TCP bulk transfer
- * performance is about 850Mbps. However forcing coalescing mbufs
- * consumes a lot of CPU cycles, so leave it off by default.
- */
-static int bge_forced_collapse = 0;
 
 TUNABLE_INT("hw.bge.allow_asf", &bge_allow_asf);
-TUNABLE_INT("hw.bge.forced_collapse", &bge_forced_collapse);
 
 SYSCTL_NODE(_hw, OID_AUTO, bge, CTLFLAG_RD, 0, "BGE driver parameters");
 SYSCTL_INT(_hw_bge, OID_AUTO, allow_asf, CTLFLAG_RD, &bge_allow_asf, 0,
 	"Allow ASF mode if available");
-SYSCTL_INT(_hw_bge, OID_AUTO, forced_collapse, CTLFLAG_RD, &bge_forced_collapse,
-	0, "Number of fragmented TX buffers of a frame allowed before "
-	"forced collapsing");
 
 #define	SPARC64_BLADE_1500_MODEL	"SUNW,Sun-Blade-1500"
 #define	SPARC64_BLADE_1500_PATH_BGE	"/pci@1f,700000/network@2"
@@ -3937,17 +3920,17 @@ bge_encap(struct bge_softc *sc, struct m
 	}
 
 	if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0 &&
-	    bge_forced_collapse > 0 && (sc->bge_flags & BGE_FLAG_PCIE) != 0 &&
-	    m->m_next != NULL) {
+	    sc->bge_forced_collapse > 0 &&
+	    (sc->bge_flags & BGE_FLAG_PCIE) != 0 && m->m_next != NULL) {
 		/*
 		 * Forcedly collapse mbuf chains to overcome hardware
 		 * limitation which only support a single outstanding
 		 * DMA read operation.
 		 */
-		if (bge_forced_collapse == 1)
+		if (sc->bge_forced_collapse == 1)
 			m = m_defrag(m, M_DONTWAIT);
 		else
-			m = m_collapse(m, M_DONTWAIT, bge_forced_collapse);
+			m = m_collapse(m, M_DONTWAIT, sc->bge_forced_collapse);
 		if (m == NULL) {
 			m_freem(*m_head);
 			*m_head = NULL;
@@ -4875,6 +4858,26 @@ bge_add_sysctls(struct bge_softc *sc)
 
 #endif
 
+	/*
+	 * A common design characteristic for many Broadcom client controllers
+	 * is that they only support a single outstanding DMA read operation
+	 * on the PCIe bus. This means that it will take twice as long to fetch
+	 * a TX frame that is split into header and payload buffers as it does
+	 * to fetch a single, contiguous TX frame (2 reads vs. 1 read). For
+	 * these controllers, coalescing buffers to reduce the number of memory
+	 * reads is effective way to get maximum performance(about 940Mbps).
+	 * Without collapsing TX buffers the maximum TCP bulk transfer
+	 * performance is about 850Mbps. However forcing coalescing mbufs
+	 * consumes a lot of CPU cycles, so leave it off by default.
+	 */
+	SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_collapse",
+	    CTLFLAG_RW, &sc->bge_forced_collapse, 0,
+	    "Number of fragmented TX buffers of a frame allowed before "
+	    "forced collapsing");
+	resource_int_value(device_get_name(sc->bge_dev),
+	    device_get_unit(sc->bge_dev), "forced_collapse",
+	    &sc->bge_forced_collapse);
+
 	if (BGE_IS_5705_PLUS(sc))
 		return;
 

Modified: head/sys/dev/bge/if_bgereg.h
==============================================================================
--- head/sys/dev/bge/if_bgereg.h	Tue Dec  8 15:29:12 2009	(r200263)
+++ head/sys/dev/bge/if_bgereg.h	Tue Dec  8 17:54:23 2009	(r200264)
@@ -2647,6 +2647,7 @@ struct bge_softc {
 	int			bge_link;	/* link state */
 	int			bge_link_evt;	/* pending link event */
 	int			bge_timer;
+	int			bge_forced_collapse;
 	struct callout		bge_stat_ch;
 	uint32_t		bge_rx_discards;
 	uint32_t		bge_tx_discards;



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200912081754.nB8HsNCF095021>