Date: Thu, 24 Jan 2002 02:54:42 +0200 From: Stoian Mishinev <mishinev@digsys.bg> To: "'stable@freebsd.org'" <stable@FreeBSD.ORG> Subject: Multiple Aironet adapters Message-ID: <3C4F5B52.90C24248@digsys.bg>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------959A607907D46387DD35818F
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hello list,
I have strange problem, about mount or 2 ago I've tried 2 aironet cards
on the same machine running FreeBSD one to our wireless network and the
other to my home network with success. After some cvsings all last week
my home network stopped to work. After setting the parameters on the
second (an1) adapter the system freezes for 1-2 min and then thing look
like this:
an0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet xxx.xxx.xxx.xxx netmask 0xffffffe0 broadcast
xxx.xxx.xxx.255
inet6 fe80::207:eff:feb9:7cf9%an0 prefixlen 64 scopeid 0x1
ether 00:07:0e:b9:7c:f9
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
ssid <SSID>
stationname <STATION>
channel 2 authmode OPEN powersavemode OFF powersavesleep 200
wepmode OFF weptxkey 1
an1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.2.254 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::207:50ff:feca:6fdb%an1 prefixlen 64 scopeid 0x2
ether 00:07:50:ca:6f:db
media: IEEE 802.11 Wireless Ethernet autoselect <adhoc>
(DS/11Mbps <adhoc>)
status: associated
ssid Home
stationname Gate-FreeBSD
channel 7 authmode OPEN powersavemode OFF powersavesleep 200
wepmode OFF weptxkey 1
but no traffic can be transmitted or received from an1.
in dmesg I found the following strange detection:
chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
an0: <Cisco Aironet 350 Series> port 0x9800-0x983f,0x9400-0x947f mem
0xda000000-0xda00007f irq 5 at device 9.0 on pci0
an0: Ethernet address: 00:07:0e:b9:7c:f9
bpf: an0 attached
an1: <Cisco Aironet 350 Series> port 0xa000-0xa03f,0x9c00-0x9c7f mem
0xda001000-0xda00107f irq 9 at device 11.0 on pci0
using shared irq9.
an0: Ethernet address: 00:07:50:ca:6f:db
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
bpf: an1 attached
vx0: <3COM 3C590 Etherlink III PCI> port 0xa400-0xa41f irq 10 at device
13.0 on pci0
utp/aui/bnc[*utp*] address 00:20:af:f4:cc:52
bpf: vx0 attached
Last cvs was on "Jan 21 01:36 EET"
The both card are checked and work alone to wireless net.
Any suggestions?
Regards,
Stoian Mishinev
P.S. Verbose dmesg are attached
--------------959A607907D46387DD35818F
Content-Type: text/plain; charset=us-ascii;
name="dmesg.detail"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.detail"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RC #0: Mon Jan 21 02:57:54 EET 2002
root@bear.digsys.bg:/usr/obj/usr/src/sys/OfficePovdiv
Calibrating clock(s) ... TSC clock: 733457795 Hz, i8254 clock: 1193342 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (733.36-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 402587648 (393152K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x005e1000 - 0x17fe7fff, 396390400 bytes (96775 pages)
fb: new array size 4
avail memory = 385798144 (376756K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb080
bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb520
pnpbios: Found PnP BIOS data at 0xc00fbed0
pnpbios: Entry = f0000:bf00 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f7080
Preloaded elf kernel "kernel" at 0xc05ba000.
Preloaded elf module "vesa.ko" at 0xc05ba09c.
Preloaded elf module "linux.ko" at 0xc05ba138.
Preloaded elf module "agp.ko" at 0xc05ba1d8.
Preloaded elf module "mga.ko" at 0xc05ba274.
Preloaded elf module "drm.ko" at 0xc05ba310.
netsmb_dev: loaded
VESA: information block
56 45 53 41 00 03 ad 57 00 c0 01 00 00 00 77 54
00 c0 00 01 01 02 c2 57 00 c0 c9 57 00 c0 d5 57
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 19 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc00c5477 (c0005477)
VESA: Matrox Graphics Inc.
VESA: Matrox Matrox G400 00
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 9 entries at 0xc00fde70
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d4000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 00009000, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x14b9, dev=0x0350, revid=0x01
class=02-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base da000000, size 7
map[14]: type 1, range 32, base 00009400, size 7
map[18]: type 1, range 32, base 00009800, size 6
found-> vendor=0x14b9, dev=0x0350, revid=0x01
class=02-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base da001000, size 7
map[14]: type 1, range 32, base 00009c00, size 7
map[18]: type 1, range 32, base 0000a000, size 6
found-> vendor=0x10b7, dev=0x5900, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000a400, size 5
found-> vendor=0x1274, dev=0x5880, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000a800, size 6
found-> vendor=0x10b7, dev=0x9200, revid=0x74
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base 0000ac00, size 7
map[14]: type 1, range 32, base da002000, size 7
found-> vendor=0x1103, dev=0x0004, revid=0x03
class=01-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000b000, size 3
map[14]: type 1, range 32, base 0000b400, size 2
map[18]: type 1, range 32, base 0000b800, size 3
map[1c]: type 1, range 32, base 0000bc00, size 2
map[20]: type 1, range 32, base 0000c000, size 8
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd4000000-0xd7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x102b, dev=0x0525, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base d8000000, size 25
map[14]: type 1, range 32, base d0000000, size 14
map[18]: type 1, range 32, base d1000000, size 23
pci1: <PCI bus> on pcib1
drm0: <Matrox MGA G400 AGP graphics accelerator> mem 0xd1000000-0xd17fffff,0xd0000000-0xd0003fff,0xd8000000-0xd9ffffff at device 0.0 on pci1
info: [drm] AGP at 0xd4000000 64MB
info: [drm] Initialized mga 2.0.0 19991213 on minor 0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=7f b=7f
ata0: mask=03 status0=00 status1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=1c status1=1c
ata1: mask=03 ostat0=1b ostat2=1b
ata1-master: ATAPI probe a=1a b=1a
ata1-slave: ATAPI probe a=19 b=19
ata1: mask=03 status0=1a status1=19
ata1-master: ATA probe a=0f b=0f
ata1-slave: ATA probe a=0f b=0f
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
an0: <Cisco Aironet 350 Series> port 0x9800-0x983f,0x9400-0x947f mem 0xda000000-0xda00007f irq 5 at device 9.0 on pci0
an0: Ethernet address: 00:07:0e:b9:7c:f9
bpf: an0 attached
an1: <Cisco Aironet 350 Series> port 0xa000-0xa03f,0x9c00-0x9c7f mem 0xda001000-0xda00107f irq 9 at device 11.0 on pci0
using shared irq9.
an0: Ethernet address: 00:07:50:ca:6f:db
bpf: an1 attached
vx0: <3COM 3C590 Etherlink III PCI> port 0xa400-0xa41f irq 10 at device 13.0 on pci0
utp/aui/bnc[*utp*] address 00:20:af:f4:cc:52
bpf: vx0 attached
Warning! Defective early revision adapter!
vx0: driver is using old-style compatibility shims
pcm0: <Creative CT5880-C> port 0xa800-0xa83f irq 5 at device 15.0 on pci0
pcm0: ac97 codec id 0x83847609 (SigmaTel STAC9721/9723)
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: ac97 primary codec extended features AMAP
using shared irq5.
pcm: setmap 17500000, 1000; 0xc14cc000 -> 17500000
pcm: setmap 17502000, 1000; 0xc14ce000 -> 17502000
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xac00-0xac7f mem 0xda002000-0xda00207f irq 12 at device 17.0 on pci0
xl0: Ethernet address: 00:01:02:06:3d:49
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
atapci1: <HighPoint HPT370 ATA100 controller> port 0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 irq 10 at device 19.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0xb000 altiobase=0xb402 bmaddr=0xc000
ata2: mask=03 status0=50 status1=00
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI probe a=00 b=00
ata2-slave: ATAPI probe a=00 b=00
ata2: mask=03 status0=50 status1=00
ata2-master: ATA probe a=01 b=a5
ata2: devices=01
ata2: at 0xb000 on atapci1
using shared irq10.
ata3: iobase=0xb800 altiobase=0xbc02 bmaddr=0xc008
ata3: mask=03 status0=20 status1=30
ata3: mask=03 ostat0=20 ostat2=30
ata3-master: ATAPI probe a=20 b=20
ata3-slave: ATAPI probe a=30 b=30
ata3: mask=03 status0=20 status1=30
ata3-master: ATA probe a=a5 b=25
ata3-slave: ATA probe a=a5 b=25
ata3: devices=00
ata3: at 0xb800 on atapci1
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
ctx0 failed to probe at port 0x230 iomem 0xd0000 on isa0
spigot0 failed to probe at port 0xad6 iomem 0xee000 irq 11 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, unlimited logging
bpf: ds0 attached
bpf: lo0 attached
bpf: stf0 attached
DUMMYNET initialized (011031)
bpf: faith0 attached
IPv6 packet filtering initialized, default to accept, unlimited logging
Linux ELF exec handler installed
IPsec: Initialized Security Association Processing.
ata2-master: success setting UDMA5 on HighPoint chip
Creating DISK ad4
ad4: <QUANTUM FIREBALLP AS20.5/A1Y.1300> ATA-5 disk at ata2-master
ad4: 19607MB (40157056 sectors), 39838 cyls, 16 heads, 63 S/T, 512 B/S
ad4: 16 secs/int, 1 depth queue, UDMA100
ad4: piomode=4 dmamode=2 udmamode=5 cblid=1
HighPoint check1 failed
ad4: 19607MB <QUANTUM FIREBALLP AS20.5> [39838/16/63] at ata2-master UDMA100
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <CDU5211/YYS2> CDROM drive at ata0 as master
acd0: read 8957KB/s (53034KB/s), 120KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad4s3a
ad4s1: type 0x7, start 63, end = 4176899, size 4176837 : OK
ad4s2: type 0xb, start 4176900, end = 16418429, size 12241530 : OK
ad4s3: type 0xa5, start 16418430, end = 28708154, size 12289725 : OK
ad4s4: type 0xf, start 28708155, end = 40146434, size 11438280 : OK
ad4s5: type 0x82, start 28708218, end = 29206169, size 497952
ad4s5: C/H/S start 1023/1/1 (16434558) != start 28708218: invalid
ad4<extended>: type 0x5, start 29206170, end = 35342999, size 6136830
ad4<extended>: C/H/S start 1023/0/1 (16434495) != start 29206170: invalid
ad4s6: type 0x83, start 29206233, end = 35342999, size 6136767
ad4s6: C/H/S start 1023/1/1 (16434558) != start 29206233: invalid
ad4<extended>: type 0x5, start 35343000, end = 40146434, size 4803435
ad4<extended>: C/H/S start 1023/0/1 (16434495) != start 35343000: invalid
ad4s7: type 0x83, start 35343063, end = 40146434, size 4803372
ad4s7: C/H/S start 1023/1/1 (16434558) != start 35343063: invalid
start_init: trying /sbin/init
splash: image decoder found: green_saver
--------------959A607907D46387DD35818F--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C4F5B52.90C24248>