Date: Fri, 26 May 2000 18:35:06 +0800 From: "Urania.C.F.Chang" <urania@erato.o3.net> To: freebsd-stable@freebsd.org, freebsd-smp@freebsd.org Subject: Compaq Prolant 1600 & SMP Problem Message-ID: <392E5359.96E18DB0@erato.o3.net>
next in thread | raw e-mail | index | archive | help
I've got a Compaq Prolant 1600 Server, 2 PentiumnII 500 CPU, ida
diskarray
control with raid 5 of 4*9G SCSI hardisk.
Everythings is great with kernel.GENERIC, but ....
As I turn on SMP options at conf/GENERIC, system would hang, and
last
message on the screen is "Mounting root from ufs:/dev/idad0s1a"
I can press ctrl-alt-del and reboot the system, but cannot get boot
-v
message as I running smp options on.
source cvsup to the newest.
here goes my dmesg(single processor) and mptable
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-STABLE #0: Thu May 25 17:08:02 CST 2000
root@www.nsb.gov.tw:/usr/src/sys/compile/www
Calibrating clock(s) ... TSC clock: 498667261 Hz, i8254 clock: 1193141
Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon (498.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 536870912 (524288K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00387000 - 0x1fff7fff, 533139456 bytes (130161 pages)
avail memory = 518705152 (506548K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x80
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc036e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
found-> vendor=0x8086, dev=0x7192, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 28
found-> vendor=0x1013, dev=0x00b8, revid=0x45
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base b6000000, size 25
map[14]: type 1, range 32, base c6dff000, size 12
found-> vendor=0x1011, dev=0x0022, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=1
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
class=08-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 00001800, size 8
map[14]: type 1, range 32, base c6dfef00, size 8
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f100, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=0
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
pci0: <Cirrus Logic GD5446 SVGA controller> (vendor=0x1013, dev=0x00b8)
at 11.0
pcib1: <DEC 21150 PCI-PCI bridge> at device 13.0 on pci0
found-> vendor=0x0e11, dev=0xae43, revid=0x10
class=02-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 00002800, size 4
map[14]: type 1, range 32, base c6efddf0, size 4
found-> vendor=0x1000, dev=0x000f, revid=0x14
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 32, base c6efdf00, size 8
map[18]: type 1, range 32, base c6eff000, size 12
found-> vendor=0x1000, dev=0x000f, revid=0x14
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 00002400, size 8
map[14]: type 1, range 32, base c6efde00, size 8
map[18]: type 1, range 32, base c6efe000, size 12
found-> vendor=0x1014, dev=0x0022, revid=0x07
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
pci1: <PCI bus> on pcib1
tl0: <Compaq Netelligent 10/100 Proliant> port 0x2800-0x280f mem
0xc6efddf0-0xc6
efddff irq 5 at device 7.0 on pci1
tl0: Ethernet address: 00:50:8b:c2:0f:11
miibus0: <MII bus> on tl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI
tl0: supplying EUI64: 00:50:8b:ff:fe:c2:0f:11
bpf: tl0 attached
pci1: <unknown card> (vendor=0x1000, dev=0x000f) at 9.0 irq 9
pci1: <unknown card> (vendor=0x1000, dev=0x000f) at 9.1 irq 10
pcib2: <IBM 82351 PCI-PCI bridge> at device 10.0 on pci1
found-> vendor=0x0e11, dev=0xae10, revid=0x03
class=01-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00003000, size 8
map[14]: type 1, range 32, base c6ffff00, size 8
map[18]: type 1, range 32, base b8000000, size 27
ida0: <Compaq Smart Array 221 controller> port 0x3000-0x30ff mem
0xb8000000-0xbf
ffffff,0xc6ffff00-0xc6ffffff irq 11 at device 0.0 on pci2
ida0: drives=1 firm_rev=4.16
idad0: <Compaq Logical Drive> on ida0
idad0: 26029MB (53309280 sectors), blocksize=512
Creating DISK idad0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 14.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf100-0xf10f at device
20.1 on pci
0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf100
ata0: mask=03 status0=50 status1=51
ata0: mask=03 status0=00 status1=00
ata0: devices = 0x4
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf108
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086,
dev=0x7112) at
0.2 irq 0
chip1: <Intel 82371AB Power management controller> at device 20.3 on
pci0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 02 3c
psm: status 90 02 3c
psm: status 90 02 3c
psm: data 08 00 00
psm: status 00 00 28
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 40084840, tty 4003101a, net 4007103a
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting up UDMA2 mode on PIIX4 chip
acd0: <COMPAQ XM-6402B/1723> CDROM drive at ata0 as master
acd0: read 5512KB/s (5512KB/s), 256KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/idad0s1a
idad0s1: type 0xa5, start 32, end = 53309279, size 53309248 : OK
start_init: trying /sbin/init
tl0: starting DAD for fe80:0001::0250:8bff:fec2:0f11
tl0: DAD complete for fe80:0001::0250:8bff:fec2:0f11 - no duplicates
found
mptable
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f4ff0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x54
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f99a4
signature: 'PCMP'
base table length: 444
version: 1.4
checksum: 0xe5
OEM ID: 'COMPAQ '
Product ID: 'PROLIANT '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 47
local APIC address: 0xfee00000
extended table length: 76
extended table checksum: 86
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step
Flags
1 0x10 BSP, usable 6 7 3
0x383fb
ff
0 0x10 AP, usable 6 7 3
0x383fb
ff
--
Bus: Bus ID Type
0 PCI
1 PCI
9 ISA
--
I/O APICs: APIC ID Version State Address
8 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID
PIN#
INT active-lo level 1 9:A
8 23
INT active-lo level 1 9:B
8 22
INT active-lo level 1 7:A
8 30
INT active-lo level 1 13:A
8 18
INT active-lo level 1 13:C
8 18
INT active-lo level 1 13:B
8 26
INT active-lo level 1 13:D
8 26
INT active-lo level 1 11:A
8 17
INT active-lo level 1 11:C
8 17
INT active-lo level 1 11:B
8 25
INT active-lo level 1 11:D
8 25
INT active-lo level 1 10:A
8 16
INT active-lo level 1 10:C
8 16
INT active-lo level 1 10:B
8 24
INT active-lo level 1 10:D
8 24
INT active-lo level 0 18:A
8 21
INT active-lo level 0 18:C
8 21
INT active-lo level 0 18:B
8 29
INT active-lo level 0 18:D
8 29
INT active-lo level 0 16:A
8 20
INT active-lo level 0 16:C
8 20
INT active-lo level 0 16:B
8 28
INT active-lo level 0 16:D
8 28
INT active-lo level 0 15:A
8 19
INT active-lo level 0 15:C
8 19
INT active-lo level 0 15:B
8 27
INT active-lo level 0 15:D
8 27
INT active-hi edge 9 1
8 1
INT active-hi edge 9 0
8 2
INT active-hi edge 9 3
8 3
INT active-hi edge 9 4
8 4
INT active-hi edge 9 6
8 6
INT active-hi edge 9 7
8 7
INT active-hi edge 9 8
8 8
INT active-hi edge 9 12
8 12
INT active-lo edge 9 13
8 13
INT active-hi edge 9 14
8 14
INT active-hi edge 9 15
8 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID
PIN#
ExtINT conforms conforms 9 0
255 0
NMI conforms conforms 9 0
255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
Extended Table HOSED!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?392E5359.96E18DB0>