Date: Fri, 21 Jul 1995 17:41:16 +0200 (WET) From: Yuri Gindin <aerygis@aerodyne.technion.ac.il> To: netblazer-users@telebit.com Cc: freebsd-questions@freebsd.org Subject: problems with netblazer and iij-ppp Message-ID: <Pine.A32.3.91.950721170140.71714B-100000@aerodyne.technion.ac.il>
next in thread | raw e-mail | index | archive | help
Hello, I'm currently using iij-ppp user process on FreeBSD-2.0.5 box and Netblazer V 3.0 on the side of my ISP. everything goes fine during dial and establishing ppp-connection but after I receive messages "unknown protocol", you can see it in the log file. The problem is sure in the netblazer, because with other providers the same procedure works OK. I use also Annex and it everything works OK. yuri@beard:~ 45 > User Process PPP. Written by Toshiharu OHNO. Log level is 09 Warning: No password entry for this host in ppp.secret Warning: All manipulation is allowed by anyone in a world Using interface: tun0 Interactive mode ppp ON beard> term Enter to terminal mode. Type `~?' for help. atdt54028550262 CONNECT 14400/ARQ/V32/LAPM/V42BIS ===================================== You've connected to Netblazer V 3.0 at host NBKULICK port line100 ===================================== Where: yuri Callback yuri:dialout on line101 ... # Typing +++ escape to return back OK ats0=1 OK RING # Netblazer rings CONNECT 14400/ARQ/V32/LAPM/V42BIS ===================================== You've connected to Netblazer V 3.0 at host NBKULICK port line101 ===================================== NBKULICK login: yuri Password: Enabled IPCP address negotiation for yuri-ppp Packet mode enabled ppp ON beard> Packet mode. PPP ON beard> show log 06-23 21:50:34 [180] ACCMAP [6] 00000000 ^@06-23 21:50:34 [180] MRU [4] 1500 ^@06-23 21:50:34 [180] MAGICNUM [6] 5db8d468 ^@06-23 21:50:34 [180] LCP: SendConfigAck(Stopped) ^@06-23 21:50:34 [180] MRU 1500 ^@06-23 21:50:34 [180] ACCMAP 00000000 ^@06-23 21:50:34 [180] MAGICNUM 055e1df2 ^@06-23 21:50:34 [180] PROTOCOMP ^@06-23 21:50:34 [180] ACFCOMP ^@06-23 21:50:34 [180] LCP: state change Stopped --> Ack-Sent ^@06-23 21:50:35 [180] LCP: Received Configure Ack (1) state = Ack-Sent (8) ^@06-23 21:50:35 [180] LCP: state change Ack-Sent --> Opend ^@06-23 21:50:35 [180] LCP: LayerUp ^@06-23 21:50:35 [180] Phase: Authenticate ^@06-23 21:50:35 [180] his = 0, mine = 0 ^@06-23 21:50:35 [180] Phase: Network ^@06-23 21:50:35 [180] IPCP: state change Initial --> Closed ^@06-23 21:50:35 [180] IPCP Up event!! ^@06-23 21:50:35 [180] IPCP: SendConfigReq ^@06-23 21:50:35 [180] IPADDR [6] 192.114.169.199 ^@06-23 21:50:35 [180] COMPPROTO [6] 002d0f00 ^@06-23 21:50:35 [180] IPCP: state change Closed --> Req-Sent ^@06-23 21:50:35 [180] CCP: state change Initial --> Closed ^@06-23 21:50:35 [180] CCP Up event!! @06-23 21:50:35 [180] CCP: SendConfigReq ^@06-23 21:50:35 [180] CCP: state change Closed --> Req-Sent ^@06-23 21:50:35 [180] IPCP: Received Configure Request (2) state = Req-Sent (6) ^@06-23 21:50:35 [180] COMPPROTO[6] 002d0f01 ^@06-23 21:50:35 [180] IPADDR[6] 192.114.169.1 ^@06-23 21:50:35 [180] IPCP: SendConfigAck(Req-Sent) ^@06-23 21:50:35 [180] COMPPROTO[6] 002d0f01 ^@06-23 21:50:35 [180] IPADDR[6] 192.114.169.1 ^@06-23 21:50:35 [180] IPCP: state change Req-Sent --> Ack-Sent ^@Unknown protocol 0x802b ^@Unknown protocol 0x8029 ^@06-23 21:50:35 [180] IPCP: Received Configure Nak (1) state = Ack-Sent (8) ^@06-23 21:50:35 [180] IPADDR[6] 192.114.169.193 ^@06-23 21:50:35 [180] IPADDR[6] changing address: 192.114.169.199 --> 192.114.169.193 ^@06-23 21:50:35 [180] IPCP: SendConfigReq ^@06-23 21:50:35 [180] IPADDR [6] 192.114.169.193 ^@06-23 21:50:35 [180] COMPPROTO [6] 002d0f00 ^@06-23 21:50:35 [180] LCP: Received Protocol Reject (5) state = Opend (9) ^@06-23 21:50:35 [180] -- Protocol (80fd) was rejected. ^@06-23 21:50:35 [180] CCP: LayerFinish. ^@06-23 21:50:35 [180] CCP: state change Req-Sent --> Stopped ^@06-23 21:50:35 [180] IPCP: Received Configure Ack (2) state = Ack-Sent (8) ^@06-23 21:50:35 [180] IPCP: state change Ack-Sent --> Opend ^@06-23 21:50:35 [180] IPCP: LayerUp. ^@06-23 21:50:35 [180] myaddr = 192.114.169.193 hisaddr = 192.114.169.1 ^@06-23 21:50:35 [180] OsLinkup: 192.114.169.1 ^@Unknown protocol 0x8029 ^@Unknown protocol 0x802b ^@Unknown protocol 0x802b ^@Unknown protocol 0x8029 What does this mean ? ^@Unknown protocol 0x8029 ^@Unknown protocol 0x802b ^@Unknown protocol 0x802b ^@Unknown protocol 0x8029 ^@Unknown protocol 0x8029 ^@Unknown protocol 0x802b ^@Unknown protocol 0x802b ^@Unknown protocol 0x8029 ^@Unknown protocol 0x8029 ^@Unknown protocol 0x802b ^@Unknown protocol 0x802b ^@Unknown protocol 0x8029 ^@Unknown protocol 0x8029 ^@Unknown protocol 0x802b @06-23 21:51:35 [180] HDLC errros -> FCS: 0 ADDR: 0 COMD: 0 PROTO: 22 ^@PPP ON beard> write: No such process ppp ON beard> quit yuri@beard:~ 46 > exit Any suggestions, thanks in advance, /-----------------------------------------------------------------\ | \\ Yuri Gindin <yuri@xpert.com> http://www.xpert.com/~yuri | | \\ // || Home: +972-4-282475 | | \\ // ___ ___ ___||__ Work: +972-4-545259 | | \// / --\ / --\ / --||-- Internet | | //\ || \\// __/ || || S/W Development | | // \\ ||__//\\____ || \\__ Network Integration | | ==//===\\||======================= System Administration | \---------\||-------UNIX Systems LTD------------------------------/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.A32.3.91.950721170140.71714B-100000>