Date: Fri, 26 Dec 2014 12:37:26 -0800 From: Adrian Chadd <adrian@freebsd.org> To: freebsdlist@compudoc.za.org Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: Anyone had experince setting up gnokii Message-ID: <CAJ-Vmo=%2BrUKyOE2kiGP5OvnaekJ8PcDw5P4Kz-0MqsCC_Ox00w@mail.gmail.com> In-Reply-To: <549A8FF4.3080303@compudoc.za.org> References: <549A8FF4.3080303@compudoc.za.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I thought gnokii worked on a real serial port, not a ugen device. ugen is the generic USB device that userland USB drivers would use. I think gnokii expects the device / port there to be a serial device, USB or otherwise. So, what cable are you using? and whats the output of "dmesg" and "usbconfig list" say? -adrian On 24 December 2014 at 02:05, Godfrey Hamshire <freebsdlist@compudoc.za.org> wrote: > Hello > > I have got a Nokia N79 and am trying to set it up to send sms's I am not > wanting any thing fancy just to send me sms's in addition to the other > notification methods I already employ for power outages loss of connectivity > etc etc. > > I have managed to get this far and am stuck > > Initializing AT capable mobile phone ... > Serial device: opening device /dev/ugen4.2 > Gnokii serial_open: tcgetattr: Inappropriate ioctl for device > Couldn't open ATBUS device: Inappropriate ioctl for device > > No matter what I try I am unable to proceed beyond this point > > > Google is not much help here I was wondering what suggestions you guys might > have. > > Regards > > Godfrey > > > > > root@32.165 ~ # usbconfig ; gnokii --identify > ugen0.1: <UHCI root HUB VIA> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE (0mA) > ugen4.1: <EHCI root HUB VIA> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE (0mA) > ugen3.1: <UHCI root HUB VIA> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE (0mA) > ugen2.1: <UHCI root HUB VIA> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE (0mA) > ugen1.1: <UHCI root HUB VIA> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE (0mA) > ugen4.2: <N79 Nokia> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON > (100mA) > GNOKII Version 0.6.31 > LOG: debug mask is 0x1 > Config read from file /usr/local/etc/gnokiirc. > phone instance config: > model = AT > port = /dev/ugen4.2 > connection = serial > initlength = default > serial_baudrate = 115200 > serial_write_usleep = 5000 > handshake = hardware > require_dcd = 0 > smsc_timeout = 60 > rfcomm_channel = 0 > sm_retry = 0 > Initializing AT capable mobile phone ... > Serial device: opening device /dev/ugen4.2 > Gnokii serial_open: tcgetattr: Inappropriate ioctl for device > Couldn't open ATBUS device: Inappropriate ioctl for device > AT bus initialization failed (1) > Initialization failed (1) > Serial device: closing device > Telephone interface init failed: Command failed. > Quitting. > Command failed. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=%2BrUKyOE2kiGP5OvnaekJ8PcDw5P4Kz-0MqsCC_Ox00w>