Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 25 Jan 2010 07:52:56 -0800
From:      "Li, Qing" <qing.li@bluecoat.com>
To:        "Andriy Gapon" <avg@icyb.net.ua>, <freebsd-net@freebsd.org>, <freebsd-current@freebsd.org>
Subject:   RE: tun setup (routing?) issue in head
Message-ID:  <B583FBF374231F4A89607B4D08578A4304673786@bcs-mail03.internal.cacheflow.com>
References:  <4B5D92C7.8070908@icyb.net.ua>

next in thread | previous in thread | raw e-mail | index | archive | help
Yes, the failure is due to route installation. To make a long story =
short, many of the
scripts that worked before not necessary because of the right reasons.=20
=20
I have been very busy at work, but I do have a patch and I will try to =
get it=20
finalized shortly.
=20
-- Qing
=20

________________________________

From: owner-freebsd-current@freebsd.org on behalf of Andriy Gapon
Sent: Mon 1/25/2010 4:47 AM
To: freebsd-net@freebsd.org; freebsd-current@freebsd.org
Subject: tun setup (routing?) issue in head




I've updated my HEAD amd64 system from December's sources to something =
more recent
and I've got problems with security/vpnc. To be precise vpnc itself =
seems to work
as good as before but its post-connect script is now failing:

$ ifconfig tun0 inet 10.99.15.144 10.99.15.144 netmask 255.255.255.255 =
mtu 1412 up
ifconfig: ioctl (SIOCAIFADDR): File exists

Where tun0 is an interface created by vpnc.
ktrace gives this:
ifconfig CALL  socket(PF_INET,SOCK_DGRAM,IPPROTO_IP)
ifconfig RET   socket 3
ifconfig CALL  ioctl(0x3,SIOCSIFMTU,0x525a60)
ifconfig RET   ioctl 0
ifconfig CALL  ioctl(0x3,SIOCGIFFLAGS,0x7fffffffda30)
ifconfig RET   ioctl 0
ifconfig CALL  ioctl(0x3,SIOCSIFFLAGS,0x7fffffffda30)
ifconfig RET   ioctl 0
ifconfig CALL  ioctl(0x3,SIOCDIFADDR,0x525380)
ifconfig RET   ioctl -1 errno 49 Can't assign requested address
ifconfig CALL  ioctl(0x3,SIOCAIFADDR,0x525340)
ifconfig RET   ioctl -1 errno 17 File exists
ifconfig CALL  write(0x2,0x7fffffffd2d0,0xa)

So, what's happening?
Do you I have to update the ifconfig command?
Or is there some issue in the networking code?

BTW, I also get the following messages in the system log when vpnc is =
started:
kernel: tun0: link state changed to UP
kernel: ifa_add_loopback_route: insertion failed
I have net.link.tap.up_on_open=3D1 in sysctl.conf if that matters.

--
Andriy Gapon
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to =
"freebsd-current-unsubscribe@freebsd.org"





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B583FBF374231F4A89607B4D08578A4304673786>