Date: Mon, 12 May 2008 15:38:00 GMT From: "S. Hutchins" <seth.hutchins@baesystems.com> To: freebsd-gnats-submit@FreeBSD.org Subject: usb/123611: BBB reset failed, STALLED from Imation/Mitsumi USB Floppy Drive Message-ID: <200805121538.m4CFc0G4092257@www.freebsd.org> Resent-Message-ID: <200805121540.m4CFe1U7065497@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 123611 >Category: usb >Synopsis: BBB reset failed, STALLED from Imation/Mitsumi USB Floppy Drive >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon May 12 15:40:01 UTC 2008 >Closed-Date: >Last-Modified: >Originator: S. Hutchins >Release: 7.0-RELEASE >Organization: >Environment: FreeBSD 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 >Description: Imation D353FUE Floppy Drive (reported as Mitsumi) VID 0x03ee PID 0x6901. Connecting the device to a 7.0-RELEASE system doesn't seem to work: umass0: <MITSUMI MITSUMI USB FDD, class 0/0, rev 1.10/1.00, addr 2> on uhub0 umass0: BBB reset failed, STALLED (after a delay, the message repeats) This message appears to be emitted from line sys/dev/usb/umass.c:2082 Disconnect the device and the following additional messages appear: umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: at uhub0 port 1 (addr 2) disconnected umass0: detached Reproduced on Shuttle XPC w. ICH6 and an Intel Server motherboard with ICH8 host controllers: Connecting a variety of other USB 2.0 mass storage devices to these two machines works, as well as connecting USB 2.0 devices through a USB 1.0 hub. I have no reason to believe any of the hardware is defective. This device works on FreeBSD 6.2-RELEASE but emits messages: Unsupported UFI command 0x35 (cam path) Synchronize cache failed, status == 0x6, scsi status == 0x00 Because the device works on 6.2-RELEASE, this may be a regression. It also works on Linux-2.6.23.15-137.fc8. >How-To-Repeat: Connect the Imation device described above to the FreeBSD 7.0-RELEASE system. Observe the message described above, and observe that it repeats after a delay. Observe that there is no device node for the device and consequently no I/O can be started. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805121538.m4CFc0G4092257>